Milescraft »TrackMaster« Hold Down Clamp
The hold down clamp is perfect for holding workpieces in place when drilling, milling, cutting, etc. With the accessories supplied, it can be inserted into most commercially available T-slots and machine tables. Combined with Milescraft...
€42.30
incl. VAT plus shipping costs
Article No. 714539
Replacement Jaw for Positioning Square Right Angle Clamp
These clamping jaws can be used to clamp various 90° angles to workpiece corners for assembly or glueing. This facilitates exact 90° assembly. Clamping jaw made of aluminium. Fits Positioning Square Right Angle Clamp incl. Jaws, No....
€7.50
incl. VAT plus shipping costs
Article No. 714515
Positioning Square Right Angle Clamp incl. Jaws, 120 mm
Precise 90° square with 120 mm leg length and holes for positioning clamping jaws. Used as an assembly or glueing aid, the square is clamped to the workpiece corner (inside or outside) to facilitate accurate 90° assembly. The recess on...
€36.00
incl. VAT plus shipping costs
Article No. 714514
Veritas Carver’s Seat Vice
This versatile carver's seat vice made of lightweight, warp-free birch multiplex can be used wherever there is seating. Your own body weight secures the base to a chair, stool or bench. The position of the workpiece can be adjusted in...
€72.30
incl. VAT plus shipping costs
Article No. 704266
Surface Clamp
Equipped with a clamping bolt, the hold-down clamp can be anchored in holes of 19-20 mm. Ideal for working on multifunction tables or workbenches. The split bolt at the lower end of the shaft is inserted into the bore and tightened from...
€74.90
incl. VAT plus shipping costs
Article No. 714638
Piher TCP Clamping System
Originally developed as a clamping system for welding tables, the TCP offers many features that are advantageous for solid wood processing. The solid clamp offers enormous pressing pressure and clamps flat and round components alike. The...
€83.30
incl. VAT plus shipping costs
Article No. 730095
Clamping Element for Round Workpieces, fits Piher TCP Clamping...
Clamping round workpieces and holding them firmly even in the presence of vibrations can be a test of patience. The two movable clamping jaws adapt to the outer contour of the workpiece, whether round, oval or organically grown. Jaws 50...
€23.10
incl. VAT plus shipping costs
Article No. 730096
Adapter Cap for Piher TCP Clamping System
Metal sleeve for reducing bench dog holes from 25 mm or 30 mm to 16 mm. The inner diameter is matched to the shaft of the Piher TCP Clamping System No. 730095 so that it can be used on sculptors' benches and workbenches. The sleeves are...
€34.70
incl. VAT plus shipping costs
Article No. 730097
HNT Gordon Tail Vice Dogs, Ø 13 mm
Brass bench dogs with square head and cylindrical shaft. One of the head edges is slightly concave and angled at 2 degrees to better grip the clamped wood. Pin length 34 mm.
€13.70
incl. VAT plus shipping costs
Article No. 715615
HNT Gordon Brass Bench Dogs, Ø 19 mm
Brass bench dogs with square head and cylindrical shaft. One of the head edges is slightly concave and angled at 2 degrees to better grip the clamped wood. Pin length 34 mm.
€18.50
incl. VAT plus shipping costs
Article No. 715616
UJK Expanding Dogs
UJK Expanding Dogs are a shorter and somewhat simpler version of the Parf Super Dogs. They have the same locking mechanism and are also made of high-quality stainless steel. They are compatible with the Festool MFT/3 multifunction table...
€46.80
incl. VAT plus shipping costs
Article No. 745222
Viking Arm One-handed Lifting and Clamping Tool
Versatile and powerful tool for millimetre-precise lifting, supporting and clamping . Ideal for aligning cabinets and window frames, lifting heavy doors, precisely tensioning warped wooden floorboards or spreading parquet flooring, and...
€187.90
incl. VAT plus shipping costs
Article No. 745090
€9.90
incl. VAT plus shipping costs
Article No. 702226
€9.90
incl. VAT plus shipping costs
Article No. 921501
Sjöbergs Smart Clamper, Mobile Clamping Aid
Easy to use for occasional and assembly work, carving small figures or working with children. Two clamps quickly fix the Smart Clamper to a stable worktop. If the clamping aid is fixed to the underside, it can also be used as a front...
€118.90
incl. VAT plus shipping costs
Article No. 707008
ToughBuilt C700 Sawhorses, 2 Pieces
Extremely robust sawhorses for mobile use or in the workshop. The laterally mounted, extendable support arms adjust to square timbers of different sizes, e.g. width up to 90 mm, height 53 mm or 90 mm. Take two square timbers and a...
€189.00
incl. VAT plus shipping costs
Article No. 714730
€114.90
incl. VAT plus shipping costs
Article No. 727789
€123.90
incl. VAT plus shipping costs
Article No. 727791
€387.00
incl. VAT plus shipping costs
Article No. 727629
DICTUM Tool Module Hammers + Screwdrivers
Fits Men's Kitchen No. 727797 and No. 727798 , tool chest with drawer height 75 mm No. 727625 and other drawer models with the same internal dimensions. Inlay of high-quality foam »Made in Germany«.
€35.40
incl. VAT plus shipping costs
Article No. 727782
DICTUM Tool Module Files ll
Fits Men's Kitchen No. 727797 and No. 727798 , tool chest with drawer height 75 mm No. 727625 and other drawer models with the same internal dimensions. Inlay of high-quality foam »Made in Germany«.
€9.90
€7.90
incl. VAT plus shipping costs
Article No. 727795
DICTUM Wooden Box, Empty
The sturdy wooden box has removable compartments. It is made of laminated wood and the surface is untreated. Storage boxes like this are indispensable for clearly organising the most important tools in the workshop or hobby room.
€19.30
incl. VAT plus shipping costs
Article No. 820256
Magnetic Tool Bar »Profi«
Magnetic tool bar for medium to heavy tools. Galvanised steel rail with plastic body. Maximum strength 3.5 kg. Suitable for the perforated wall of the Men's Kitchen.
€39.80
incl. VAT plus shipping costs
Article No. 703067
Magnetic Tool Bar »Toolfix«
Reliable magnetic tool bar with extra strength. For easy access to your tools. Black plastic body, to be mounted using screws. Maximum strength 2.5 kg.
€29.90
incl. VAT plus shipping costs
Article No. 707210
Magnetic Tool Bar »Toolholder«
Magnetic tool bar for light to medium weight tools. Powder-coated steel rail with plastic body. Maximum strength 750 g.
€10.90
incl. VAT plus shipping costs
Article No. 707220
Double-Sided Magnetic Tool Bar
High performance magnetic tool bar. Can be mounted using screws or via its own magnetic power (on ferromagnetic wall surfaces). Chrome-plated metal rails, two mounting brackets. Maximum strength 10 kg.
€29.90
incl. VAT plus shipping costs
Article No. 707221
Lake Erie Toolworks Moxon Vise Lite
The Moxon Vice is a fitted front vice. It can be clamped to any workbench. It has also a very flexible working height and can be individually adjusted for an ergonomic posture. Maximum possible clamping width 115 mm. Clearance between...
€167.00
incl. VAT plus shipping costs
Article No. 707669
DICTUM Clamp Rack
Metal clamp rack that keeps 12 clamps ready to hand. Ideal for DICTUM Spheroidal Cast Iron Screw Clamps from a jaw depth of 100 mm (No. 720415 ...), Body Clamps (No. 720420 ...), Bessey Body Clamps REVO KRE (No. 705717 ...), Piher Maxi-F...
€18.70
incl. VAT plus shipping costs
Article No. 707725
DICTUM Clamp Rack for One-handed Clamps
Metal clamp rack for easy storage of twelve clamps. Max. bar thickness 7 mm. Suitable for wall mounting.
€22.90
incl. VAT plus shipping costs
Article No. 728899
Stanley Metal Saw Horse, Pair
Practical folding legs for quick setup, easy transport and breakdown of the saw horse onsite. Metal bar enables easy clamping by means of a screw clamp. Anti-slip rubber pads on the outer ends of the metal bar. Version: folding Load...
€59.90
incl. VAT plus shipping costs
Article No. 718008
Wooden case for DICTUM Marking Gauge and Starrett Combination...
High-quality dovetailed wooden case made of native beech. The interior made of solid wood with precisely milled recess prevents the marking gauge and the combination square from touching each other. Waxed surface.
€25.20
incl. VAT plus shipping costs
Article No. 730883
ToughBuilt 3-in-1 Roller Stand
The 3-in-1 head adjusts to use eight ball bearings, a roller or sliding plate. The right support for every material and every task. Whether in the workshop or on the construction site, this roller stand supports long workpieces wherever...
€49.00
incl. VAT plus shipping costs
Article No. 714731
ToughBuilt Drill Holster
The large holster for cordless screwdrivers and drills has 13 pockets and loops, including two screwdriver loops, a covered accessory pocket, 7 drill bit pockets and snap hook attachments loops. Works great alone for both left and...
€29.90
incl. VAT plus shipping costs
Article No. 714745
ToughBuilt Supply Pouch
Universal bag to carry fasteners and accessories. The integrated kickstand allows it to stand upright on the ground close at hand. With its No-Snag Hidden Seam pocket and ravel-proof six-layer construction this large pouch withstands the...
€27.90
incl. VAT plus shipping costs
Article No. 714746
ToughBuilt Tape Measure / All Purpose Pouch
The all-purpose bag for e.g. nails or screws with additional loops for attaching all kinds of tools. With its No-Snag Hidden Seam pocket and ravel-proof six-layer construction, this large pouch withstands the most rigorous working...
€17.50
incl. VAT plus shipping costs
Article No. 714747
ToughBuilt Universal Pouch with Utility Knife Pocket
This pouch’s eight pockets and loops - including plastic-lined utility knife pocket and a tape measure clip - make it perfect for smaller jobs. The six-layer construction is extremely robust and durable. ClipTech Hub included.
€19.90
incl. VAT plus shipping costs
Article No. 714748
ToughBuilt Technician 6-Pocket Pouch
This pouch has a unique, adjustable central pocket with a bottom that can be closed for pliers or opened for longer tools to hang though. It also includes four screwdriver loops, a notebook pocket and a tape measure clip. The six-layer...
€27.90
incl. VAT plus shipping costs
Article No. 714749
ToughBuilt Hammer Holster
This holster provides high wearing comfort by tilting the hammer backwards and keeping it away from your legs. The second sleeve offers additional space for e.g. a pry bar. With its six-layer construction and robust rivet reinforcement,...
€21.90
incl. VAT plus shipping costs
Article No. 714750
ToughBuilt Smartphone Pouch with Notebook & Carpenter’s Pencil
The steel clip allows for this bag to be worn on any belt. Works great alone or combined with any tool belt. This pouch includes a squared notebook, carpenter’s pencil, and snap hook. Its elastic bands stretch to securely hold most...
€16.00
incl. VAT plus shipping costs
Article No. 714751
ToughBuilt ClipTech Hubs, 3-piece Set
Attachment point for all ToughBuilt ClipTech holsters and pouches. Hubs can easily attach to any standard belt, ClipTech pouches or the ClipTech Wall Organizer. They connect the holster/pouch and the belt/rail.
€9.90
incl. VAT plus shipping costs
Article No. 714752
ToughBuilt Work Belt
This work belt is customizable to the size of each consumer. The included clamp-on steel tip allows the user to adjust the belt to the desired length and secure the end with the clamp. Optimised to work with all ClipTech pouches and...
€11.20
incl. VAT plus shipping costs
Article No. 714754
ToughBuilt Modular Hammer Loop
The Modular Hammer Loop can be clipped on to any belt or pouch pocket. An additional strap firmly provides a secure hold for cables. Rivet-reinforced ABS construction with steel bracket.
€8.90
incl. VAT plus shipping costs
Article No. 714755
ToughBuilt Wall Organizer for ClipTech
The powder-coated steel rail solidly mounts on your workshop wall or in the back of a van with the included screws and wall anchors. This organizer is designed to work with all ClipTech holsters and pouches. It gives the professional a...
€10.90
incl. VAT plus shipping costs
Article No. 714756
Bora Speedhorse PM-4500 Sawhorses, 2 Pieces
These high-load work stands ( 680 kg per work stand) are the ideal solution for professional applications in the workshop and on the construction site. The innovative design allows the legs to be automatically unfolded in seconds with a...
€169.00
incl. VAT plus shipping costs
Article No. 714849
Bora Speedhorse XT PM-4550 Sawhorses, 2 Pieces
These high-load work stands ( 680 kg per work stand) are the ideal solution for professional applications in the workshop and on the construction site. The innovative design allows the legs to be automatically unfolded in seconds with a...
€194.00
incl. VAT plus shipping costs
Article No. 714850
Blacksmith’s Vice
Robust blacksmith's vice made of cast steel for heavy-duty use in metalwork or forging. The structure is designed for machining heated workpieces. The trapezoid threaded spindle and the additionally attached tension spring enable...
€626.00
incl. VAT plus shipping costs
Article No. 700154
York Ball Head Vice
Thanks to a ball-joint, this solid vice can rotate through three axes. The position can be set to meet the specific demands of the workpiece, the two knob handle screws allow for quick and secure fastening. The base plate can be fastened...
€109.70
incl. VAT plus shipping costs
Article No. 705826
York Heavy Vice
Robust, high-quality vice in GJL30 cast iron for high compressive stress. The trapezoidal thread spindle is fitted inside the precise roller guide, so it stays protected against damage and dirt. The integrated, removable rotary plate...
€129.00
incl. VAT plus shipping costs
Article No. 716270