Veritas T-Track Clamp
This clamp can secure boards up to 5 cm thick. Fits T-Track No. 703898 , No. 703899 and No. 703906 .
€23.10
incl. VAT plus shipping costs
Article No. 703901
Veritas T-Track 915 mm, with Angular Stop
T-Track with two different profiles for easily fitting to a self-made worktop. The T-Track is easy to attach to the worktop via the 19 mm-wide lip. When using a 15 mm-thick worktop, the T-Track can be screwed flush to its surface. The...
€23.90
incl. VAT plus shipping costs
Article No. 703898
Veritas Universal T-Track, 920 mm
All-purpose T-track for flexible use with a T-track section on each side. The T-track can be used for all types of routing jigs, clamping boards and auxiliary devices. Bar cross-section external dimensions 38 x 18 mm, T-section 1;...
€24.60
incl. VAT plus shipping costs
Article No. 703906
TC Biscuit Jointing Set, Shank Ø 8 mm
The set comprises an arbor (Ø 8 mm shank) with mounted slotting cutter (cutting length 4 mm) and three replaceable ball bearings. Suitable for the three most common biscuit sizes 0, 10 and 20. In combination with the 4 mm straight plunge...
€96.90
incl. VAT plus shipping costs
Article No. 717672
TC Chamfer Bit with ball bearing, Shank Ø 8 mm
For the precise chamfering of edges and joining with the standard angles 45° (rectangle), 30° (six sides), 22.5° (eight sides) and 15° (twelve sides). Chamfer height max. 9.5 mm.
€33.60
incl. VAT plus shipping costs
Article No. 717668
TC Cove Bit with ball bearing, Shank Ø 8 mm
The high-quality ball bearing (Ø 9.5 mm) helps you guide the bit exactly along the edge of the workpiece to cut a precise 1/4 curve.
€36.90
incl. VAT plus shipping costs
Article No. 717665
TC Rounding over Bits with Ball Bearing, Shank Ø 8 mm
Using different cutting depths, you can cut soft curves as well as rebated curves (German moulding) with the same bit.
€35.90
incl. VAT plus shipping costs
Article No. 717772
TC Straight Bit with Top Ball Bearing / Copy Cutter, Shank Ø 8 mm
Bottom- and side-cutting straight bit with bearing on the shank. Ideal for copying curved shapes along a template clamped on top of the workpiece. Can also be used as a trimming bit.
€44.10
incl. VAT plus shipping costs
Article No. 717676
TC Solid Tungsten Carbide Spiral Bits, Shank Ø 8 mm
Because of the spiral cutting edge, the bits cut with a pulling action, which produces a very clean-cut edge. The ground spiral also ensures efficient chip removal and enables routing with less pressure (reduced risk of breakage). For...
€46.80
incl. VAT plus shipping costs
Article No. 717786
TC Core Box Bit, Shank Ø 8 mm
Full-length cutting edges which also cut on the end, without bearing. For cutting decorative grooves, grip mouldings, juice grooves and similar. Can also be used for lettering.
€29.90
incl. VAT plus shipping costs
Article No. 717766
TC V-Groove and Engraving Bit, Shank Ø 8 mm
For engraving letters and cutting V grooves and decorative grooves. Also suitable for chamfering hardwood and panel materials.
€26.70
incl. VAT plus shipping costs
Article No. 717764
TC Trimming Bit, Ø 1/2"
To ensure clean cutting of decorative layers, the bearing diameter is exactly equal to the cutting diameter. Can also be used as a copy bit.
€38.50
incl. VAT plus shipping costs
Article No. 717760
TC Rebate Bit Set with 4 Ball Bearings, Ø 34.9 mm
By changing the bearing, you can cut clean rebates at depths of 7.9, 9.5, 11.1 and 12.7 mm. Ideal for rebating curved workpieces. Includes hex key for changing the bearings.
€69.90
incl. VAT plus shipping costs
Article No. 717590
TC Classic Roman Ogee Bit with Ball Bearing, Shank Ø 8 mm, R...
Classic Roman profile with step and two identical radiuses. The step interrupts the swing of the two opposite radiuses and emphasises the middle of the profile.
€63.80
incl. VAT plus shipping costs
Article No. 717785
TC Roman Ogee Bit with Ball Bearing, Shank Ø 8 mm, R 6.35 mm,...
Roman profile with two identical radiuses, without rebate. Also suitable as a cove bit.
€52.80
incl. VAT plus shipping costs
Article No. 717782
TC Ogee Bit with Ball Bearing, Shank Ø 8 mm, R 4.8 mm, Ø 31.8 mm
Ogee profile with two identical radiuses. Also suitable as a rounding-over bit.
€56.60
incl. VAT plus shipping costs
Article No. 717781
TC Panel-Raising Bit with Ball Bearing, Shank Ø 8 mm, Ogee, Ø...
Elegantly curved ogee profile for classic door and body panels. Profile depth 19 mm. For safe cutting and clean results, we recommend cutting at a low speed (max. 12,000 rpm) and in several passes on a router table. Ideal addition to our...
€87.10
incl. VAT plus shipping costs
Article No. 717778
TC Cavetto Bit with Ball Bearing, Shank Ø 8 mm, R 6.35 mm, Ø...
For cavetto profiles, concave radius with step and rebate.
€59.90
incl. VAT plus shipping costs
Article No. 717678
TC Straight Plunge Cutters, Shank Ø 8 mm
Bottom- and side-cutting straight cutter with soldered-in TC centre tip. For grooving, rebating and mortising. Suitable for plunge. For work in abrasive materials such as particle boards, MDF, plywood, and hardwood.
€29.30
incl. VAT plus shipping costs
Article No. 717673
Wixey Electronic Digital Readout Kit for the Height Adjustment...
The display developed for router lifts and router tables is attached to a clearly visible position on the router table. A 200 cm long data cable leads to the underside of the router lift, to which the measuring rail with sensor is...
€84.40
incl. VAT plus shipping costs
Article No. 721058
Hope Aluminium Grinding Disc Ø 145 mm, with Velcro Coating
Handy sanding disc that fits direct onto your lathe chuck. The dovetailed recess in the back is 55 mm. Fits most standard chucks with 100 mm diameter and jaws, including super nova, Record sc4, Vicmarc, etc. Not suitable for Axminster...
€32.80
incl. VAT plus shipping costs
Article No. 707959
MANPA Grinding Spindle for Angle Grinder
Grinding spindle for free-hand work with drive machines (angle grinder or drill). This allows, for example, penetrations on sculptural objects, tree edges etc. to be sanded effectively and quickly. Sanding sleeve diameter 19 mm, length...
€39.90
incl. VAT plus shipping costs
Article No. 729966
Wixey Electronic Digital Readout Kit for the Passage Height of...
For easy reading of the set passage height or for quick readjustment by a few tenths of a millimetre. The digital display can be retrofitted to most portable thickness planers in minutes. The indicator can also be used on drum sanders....
€89.90
incl. VAT plus shipping costs
Article No. 721057
Extraction Hose, Ø 100 mm
Flexible, steel wire reinforced hose with rubber cuffs at each end. Ideal for mobile extractors in the workshop. The rubber cuffs can suit extraction outlets of around 100 to 110 mm diameter quickly and easily.
€91.30
incl. VAT plus shipping costs
Article No. 720546
Dust Hood
Rectangular plastic funnel with spigot to fit 100 mm extraction hoses. For collecting and extracting shavings on e.g. table saws, surface planers and wherever there are no specific extraction connectors.
€19.90
incl. VAT plus shipping costs
Article No. 720549
Moisture Meter with Electrode and Non-destructive Mode
Nothing is more irritating than the drying cracks or heavy warping that can occur after working on wood that is too wet. This moisture meter provides assistance with two different measuring modes: search mode provides non-destructive...
€209.00
incl. VAT plus shipping costs
Article No. 707285
Gann Electrode Moisture Meter, Measuring Range 5-20 %
The wood and plaster moisture meter functions using two measuring electrodes which are pushed into the material. The device measures the electrical resistance (and therefore the level of moisture) of the wood, wood-based material,...
€124.80
incl. VAT plus shipping costs
Article No. 707314
Wood Moisture Measuring Instrument
With this measuring instrument, you can determine the wood humidity set in a room. The two indicators show temperature and relative air humidity. The intersection of the indicators determines the anticipated wood balance humidity. This...
€109.00
incl. VAT plus shipping costs
Article No. 707133
UJK Digital Level Box
Simple and fast angle adjustment of circular saw blades, drill stands, bandsaw or grinding tables. Simply attach the magnetic underside to ferromagnetic surfaces and read off the angle. High accuracy of ±0.1°. All measurements can be...
€36.40
incl. VAT plus shipping costs
Article No. 720777
Digital Angle Gauge with Point Laser
For fast and precise measurement of angles (°) and inclinations (%). An indispensable tool on the machine tables of bandsaws and column drill presses and when tilting circular saw blades. The integrated point laser offers a great...
€39.90
incl. VAT plus shipping costs
Article No. 707769
Underframe for DICTUM Multifunction Table
For exact, reproducible, fast and easy sawing or milling of any angle. Whether in the hole grid of the table top or in the T-slot for infinitely variable angle settings, with the DICTUM bench dog system and a guide rail (available as...
€1,131.00
incl. VAT plus shipping costs
Article No. 707796
Silbergleit Dry Slip-additive
Anti-rust and non-stick coating with long-lasting effect thanks to its exceptional abrasion resistance. Easy application, e.g. with a cloth. Does not contain graphite or silicone. Areas of application As slip-additive: Invisible and dry...
€10.80
(Content: €43.20 / 1 litre)
incl. VAT plus shipping costs
Article No. 706178
UJK Parfguide System MK II
The Parf drilling system is a very precise and fast method for making your own perforated plates for e.g. multifunction tables and workbenches. The 20 mm boreholes in an exact, right-angled grid equipped with Parf Bank Pins or Parf Super...
€229.00
incl. VAT plus shipping costs
Article No. 720774
Groz Drill Press Vice, UG75
This lightweight drill press vice with a prism jaw and a smooth, laterally guided jaw is used for secure clamping and fixing of workpieces on bench and pillar drills. Both jaws have support surfaces for clamping flat workpieces. In...
€49.70
incl. VAT plus shipping costs
Article No. 714521
Woodpeckers »VaryAngle« Clamping Fixture, Leg Length 80 mm
The VaryAngle clamping devices are practical aids for aligning polygonal frames, assembling joints with variable angles , or for constructing adjustable auxiliary devices on the machine table. Three separate clamping devices are required...
€33.80
incl. VAT plus shipping costs
Article No. 704390
Wixey Digital Setting Gauge for Woodworking Machines
Designed for woodworking, this depth setting gauge is useful for many applications. The easy-to-read display is simple to operate. The measuring tip can also be used to take depth measurements in narrow boreholes. Applications: Distance...
€27.90
incl. VAT plus shipping costs
Article No. 721056
€39.00
incl. VAT plus shipping costs
Article No. 708087
UJK Reamer for 20 mm Bench Dog Holes
For precise work it is essential that accessories fit accurately into the multifunctional table’s hole grid. Depending on the tabletop material, a change in wood moisture content or protruding wood fibres can cause the accessories to...
€28.50
incl. VAT plus shipping costs
Article No. 730847
UJK Parf Anchor Dogs, 18 x Ø 20 mm, 1 Pair
CNC machined for an exact fit in 20 mm holes. A useful accessory for the production of hold down clamps, planing fences and a variety of possibilities for jig and fixture construction. M8 threaded through-hole.
€20.90
incl. VAT plus shipping costs
Article No. 715434
UJK Parf Anchor Dogs, 32 x Ø 20 mm, 1 Pair
CNC machined for an exact fit in 20 mm holes. A useful accessory for the production of hold down clamps, planing fences and a variety of possibilities for jig and fixture construction. M8 threaded through-hole.
€24.00
incl. VAT plus shipping costs
Article No. 730845
In-line Clamp
Clamp with rack feed, made of anodised aluminium. The large rotary wheel enables fine and sensitive pressure regulation. Equipped with a replaceable plug-in pin on the underside, it is fixed in the dog holes of workbenches or...
€74.90
incl. VAT plus shipping costs
Article No. 714637
Clamping Sleeve Adapter for Piher Mini Quick
The clamping sleeve for 20 mm holes allows the Mini Quick one-handed clamp to be used as an insertion clamp or horizontal clamping element on e.g. multifunction tables. Insertion clamp: Remove the fixed bracket of the Mini Quick...
€28.30
incl. VAT plus shipping costs
Article No. 730094
Slot Nut M8, 2 Pieces
Versatile slot nut made of aluminium with 45 mm length. Ideal for making auxiliary and clamping devices combined with guide rails. One threaded hole M8 with brass pressure screw for fixing the slot nut in guide rails for example and one...
€6.50
incl. VAT plus shipping costs
Article No. 714668
Guide Rail
The wide T-tracks form the base for sliding clamping devices or stops. With the matching slot nuts No. 714668 or No. 714670 , workpieces can be clamped and fixed securely and quickly on worktops. Track cross-section Outer dimensions 30 x...
€12.90
incl. VAT plus shipping costs
Article No. 714672
Slot Nut 200 mm, M6/M8
Slot nut with 200 mm length for constructing auxiliary and clamping devices combined with guide rails. The long slot nut is also suitable as a glide, e.g. for cross or angle fences on machine tables. The four M6 and three M8 internal...
€8.90
incl. VAT plus shipping costs
Article No. 714670
Sliding Rail, 300 mm
Adjustable sliding rail with square cross-section (19 x 9.5 mm) for guiding in T-tracks (e.g. Nos. 714672 , 714673 ). The 300 mm long rail contains four M6 threads for fastening stops, auxiliary devices, etc. The play between the sliding...
€12.90
incl. VAT plus shipping costs
Article No. 714671
Hattori Hold-down Clamp, Height Adjustable
Hold down clamp milled from solid aluminium with adjustable counterpressure part (three locking positions). This ensures the ideal position and maximum clamping force at any clamping height between 0 and 80 mm. A large star handle allows...
€29.90
incl. VAT plus shipping costs
Article No. 714650
Veritas T-Slot Fence Flip-Stop
T-slot length stop that can be fitted onto the T-track (No. 703899 ) for example, to facilitate the trimming of same-length workpieces for example. The stop can stay permanently on the T-track and be folded up when not in use.
€28.80
incl. VAT plus shipping costs
Article No. 703309