Nano Hone Lapping Plate Ridge Tech NL-6
This lapping plate, with its star and hexagon pattern, maximizes the number of edge-material contact points. Recommended for sharpening stones from 400 to 30 000 grit. Flatness tolerance < 0.05 mm (after diamond coating). Approx. grit 240 (60 micron).
Diamond lapping plates have either a full-surface or an interrupted diamond coating. With lapping plates with interrupted diamond coating, not the plate's entire surface is brought to bear but only the virtually indestructible and sharp edges of each of the raised party of the pattern distributed over the plate’s surface.This design has the following advantages:
- Makes shaping a lot quicker thanks to allowing the abrasive slurry to quickly drain away
- Requires less force thanks to the smaller contact area
- Significantly longer lapping plate service life
- Extremely even surface and hence able to create even surfaces on the stone being resurfaced
Nano Hone
Nano Hone is an entity of HMS Enterprises Inc., which is headquartered in the USA and has a production site in Japan. Nano Hone has over 40 years experience in the field of sharpening, dressing and woodworking, and is dedicated to developing outstanding, innovative and high-quality sharpening products.
- Grit 240 (60 microns)
- Dimensions 240 x 80 x 15 mm
- Purity of the grain high
- Abrasive Diamond
- Abrasive surface size 240 x 80 mm
- Grade of wear low
| Article no. | 711258 |
| Brand | Nano Hone |
Suitable for
Nano Hone Shaping Stone, Grit 400 (35 microns)
The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
€73.90
incl. VAT plus shipping costs
Article No. 711226
Nano Hone Sharpening Stone, Grit 1000 (15 microns)
The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
€79.90
incl. VAT plus shipping costs
Article No. 711227
Nano Hone Honing Stone, Grit 6000 (2 microns)
The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
€98.90
incl. VAT plus shipping costs
Article No. 711228
Nano Hone Shaping Stone, Grit 200 (70 microns)
The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
€65.90
incl. VAT plus shipping costs
Article No. 711249
Nano Hone Sharpening Stone, Grit 3000 (6 microns)
The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
€88.90
incl. VAT plus shipping costs
Article No. 711256
Nano Hone Polishing Stone, Grit 10 000 (1 microns)
The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
€135.90
incl. VAT plus shipping costs
Article No. 711257
1Stone »Pierre La Lune« Natural Polishing Stone, Grit 8000-12 000
The »Pierre La Lune« is a very dense and durable natural polishing stone that offers a unique fine quality, e.g. for razors and kitchen knives. During the polishing process, a soft, violet-coloured abrasive paste quickly forms, which...
€118.90
incl. VAT plus shipping costs
Article No. 711689
1Stone »Black Shadow« Natural Polishing Stone, Grit 12 000-15 000
The »Black Shadow« natural polishing stone is a very dense but not too hard natural slate that is easy to work with and gives razors and kitchen knives a perfect finish. A slurry stone made from the same material is included, to achieve...
€96.50
incl. VAT plus shipping costs
Article No. 711690
Nano Hone Polishing Stone, Grit 30 000 (0.5 microns)
The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
€249.00
incl. VAT plus shipping costs
Article No. 711568