Herdim System Calibrated Stop Ring for Peg Reamers, Violin 4/4 Thin

Using the calibrated stop rings on Herdim reamers enables you to trim the pegholes to a definite...
Nominal Ø: 7.2 mm
Using the calibrated stop rings on Herdim reamers enables you to trim the pegholes to a definite diameter matching precisely the final diameter of the Herdim standardized pegs. The same applies to the conical holes of endbuttons and cello and double bass endpins. The stop rings are tapered in ultimate precision according to the matching reamer and held in position via a locking screw. The fence side is slightly rounded to avoid scratches on the pegbox. The nominal diameter is etched on each ring.
     
    more
    less
    Further details on the manufacturer

    Herdim® is DICTUM®'s own brand for products in the field of musical instrument making.

    • Use for Peg, Violin 4/4, thin
    • Taper 1/30
    Article no. 730430
    Brand Herdim
    Ready to ship, delivery time 3-4 workdays within Germany
    €3.60 per piece(s)

    Prices incl. VAT

    i

    plus shipping costs

    Remember
    Many other models
    Article
    Taper
    Price
    Quantity

    Article no.: 730430

    Taper: 1/30
    Price: €3.60
    Quantity:
     

    Article no.: 730431

    Taper: 1/30
    Price: €3.60
    Quantity:
     

    Article no.: 730434

    Taper: 1/30
    Price: €3.60
    Quantity:
     

    Article no.: 730435

    Taper: 1/30
    Price: €3.60
    Quantity:
     

    Article no.: 730437

    Taper: 1/25
    Price: €3.60
    Quantity:
     
    Suitable for

    Suitable for

    Herdim System Smoothing Reamer with 1/4 Hexagonal Shaft

    Herdim System Smoothing Reamer with 1/4 Hexagonal Shaft

    The cutting edges of the regular Herdim reamers are bevel ground to a sharp edge, resulting in an aggressive cutting action. This smoothing reamer however has cutt­ing edges which are on one side slightly rounded, according to the radius...
    €99.90

    incl. VAT plus shipping costs

    Article No. 730413