Festool Flute cutter HW S8 D25,5/R6,35 KL
Main areas of application: For every flute cutter, Festool offers a roundover cutter with the same radius (except for R 20). Flute cutters and radius routers can be ideally combined, e.g., for profiles and counter profiles
€48.20
€44.90
incl. VAT plus shipping costs
Article No. 706684
Axminster Lathe Craft AC305WL
For beginners and hobbyists who are looking for a low-cost solution. This small, yet robust benchtop lathe offers much of the functionality of large lathes. Variable spindle speeds with electronic speed control from 500 to 4080 rpm, cast...
€643.00
€569.00
incl. VAT plus shipping costs
Article No. 706520
€119.00
€99.00
incl. VAT plus shipping costs
Article No. 706527
Swedish Stick Tang Blade made of Damasteel RWL34
Ready-to-use blade made of powder metallurgical steel RWL34. This rustproof steel has an excellent edge life as well as an extraordinary sharpness and is therefore ideal for hunting purposes. Hardness 61 HRC. Pre-sharpened and polished...
€136.50
€119.00
incl. VAT plus shipping costs
Article No. 709615
Hiro Suminagashi Folding Knife, Desert Iron Wood
Exquisite knives with extravagant Damascus steel blades and a beautiful pattern, suitable for everyday use. The Suminagashi pattern makes the blade, which is forged with 33 layers of Japanese steel, a real eye-catcher. The cutting edge...
€179.00
€159.00
incl. VAT plus shipping costs
Article No. 719760
HAGER HSS Bell-shaped Cutter
Bell-shaped cutters achieve a very clean surface and provide long service life. The bell-shaped cutter is reground on the inner bevel.
€99.90
€89.00
incl. VAT plus shipping costs
Article No. 706549
Maserin Folding Knife Arno
This elegant jackknife was produced in cooperation with French designer Jean Marc Arnaud. Its blade is made of rustproof 440C steel; it is opened using the thumb stud. A reliable liner lock mechanism holds the blade firmly in place. The...
€129.00
€109.00
incl. VAT plus shipping costs
Article No. 709669
Leather Sheath for DICTUM Double-Bitted Mortise Axe
High-quality cowhide sheath, sewn with thick thread.
€15.50
€11.90
incl. VAT plus shipping costs
Article No. 715174
KN95 Folding Respiratory Protection Mask, 5-Piece Set
High quality protection masks with excellent fit according to the KN95 standard. KN95 masks provide 95 % filtration of non-oily, airborne particles. For single use only.
€29.90
€5.00
incl. VAT plus shipping costs
Article No. 707985
Festool Sanding disc STF DELTA/7 P120 GR/100 Granat
Main areas of application: Processing modern paint systems. Recommended for VOC clear coats. Processing hard sublayers. Processing plastics, mineral materials, acrylic, repair compounds, fillers
€45.90
€39.90
incl. VAT plus shipping costs
Article No. 720197
Festool Sanding disc STF DELTA/7 P240 GR/100 Granat
Main areas of application: Processing modern paint systems. Recommended for VOC clear coats. Processing hard sublayers. Processing plastics, mineral materials, acrylic, repair compounds, fillers
€45.90
€39.90
incl. VAT plus shipping costs
Article No. 720199
Mina Hocho, Yanagiba, fish knife
An accomplished, easy-care combination of a rustproof Suminagashi blade with rugged handle scales made of brown wooden laminate. The central cutting layer made of rustproof VG-10 steel is enclosed within 16 layers of Suminagashi steel,...
€344.00
€299.00
incl. VAT plus shipping costs
Article No. 719878
Sorby Polishing Mop
Particularly practical for final polishing of dishes and bowls. Fits mount No. 720399 .
€56.50
€48.90
incl. VAT plus shipping costs
Article No. 720372
Sorby Polishing Mop
Particularly practical for final polishing of dishes and bowls. Fits mount No. 720399 .
€29.90
€25.90
incl. VAT plus shipping costs
Article No. 720371
Sorby Mount for Polishing Mop
This mount allows polishing mops (No. 720371 and 720372 ) and DICTUM Mini Polishing Motor PM 75 (No. 728795 ) to be attached. Suitable for use with flexible shafts for the Kirjes grinding system (No. 707433 ), but also all conventional...
€22.90
€19.90
incl. VAT plus shipping costs
Article No. 720399
€217.00
€199.00
incl. VAT plus shipping costs
Article No. 707711
Le Thiers Shadow Table Knives, 6-Piece Set
These exclusive table knives were created in cooperation with Thomas Bastide, a French designer. The asymmetrical design of both handle scales, whereby the right handle scale is significantly thicker and sloped at a 15° angle, ensures an...
€254.00
€214.00
incl. VAT plus shipping costs
Article No. 709682
Folding Knife Worker
Exceptional, entirely handmade folding knife made of Damasteel. Damasteel, manufactured in Sweden, is a stainless Damascus steel produced using powder metallurgy out of RWL34* (»light«-coloured) and PMC27** (»dark«-coloured) steel by...
€1,690.00
€1,490.00
incl. VAT plus shipping costs
Article No. 709871
Magna-Tec Delta-S Varnish Protection Film
Exact-fitting, durable polyurethane films that protect varnished blade rest modules and the inclinometer from scratches. Can be removed residue-free even after longer periods of time. Suitable for the Magna-Tec Delta-S sharpening system...
€3.80
€3.30
incl. VAT plus shipping costs
Article No. 708573
Magna-Tec Delta-S Varnish Protection Film
Exact-fitting, durable polyurethane films that protect varnished blade rest modules and the inclinometer from scratches. Can be removed residue-free even after longer periods of time. Suitable for the Magna-Tec Delta-S sharpening system...
€4.80
€4.20
incl. VAT plus shipping costs
Article No. 708574
Magna-Tec Delta-S Varnish Protection Film
Exact-fitting, durable polyurethane films that protect varnished blade rest modules and the inclinometer from scratches. Can be removed residue-free even after longer periods of time. Suitable for the Magna-Tec Delta-S sharpening system...
€5.80
€5.10
incl. VAT plus shipping costs
Article No. 708575
Magna-Tec Delta-S Varnish Protection Film
Exact-fitting, durable polyurethane films that protect varnished blade rest modules and the inclinometer from scratches. Can be removed residue-free even after longer periods of time. Suitable for the Magna-Tec Delta-S sharpening system...
€2.50
€2.20
incl. VAT plus shipping costs
Article No. 708576
Edge Pro Instructional DVD
This DVD demonstrates and explains how to sharpen using the Edge Pro sharpening system. Clear and self-explanatory video sequences. Language: English
€12.30
€7.90
incl. VAT plus shipping costs
Article No. 708543
Kanehiro Hocho, Gyuto, fish and meat knife
Japanese kitchen knife by master smith Hiroshi Kato, who has hand-crafted beautiful cutting tools for over 50 years. Delicate traces of hammering decorate the upper section of the triple-layered blade, giving the knife its rustic charm....
€219.00
€199.00
incl. VAT plus shipping costs
Article No. 719932
Kanehiro Hocho, Gyuto, fish and meat knife
Japanese kitchen knife by master smith Hiroshi Kato, who has hand-crafted beautiful cutting tools for over 50 years. Delicate traces of hammering decorate the upper section of the triple-layered blade, giving the knife its rustic charm....
€274.00
€249.00
incl. VAT plus shipping costs
Article No. 719933
Kanehiro Hocho, Gyuto, fish and meat knife
Japanese kitchen knife by master smith Hiroshi Kato, who has hand-crafted beautiful cutting tools for over 50 years. Delicate traces of hammering decorate the upper section of the triple-layered blade, giving the knife its rustic charm....
€314.00
€279.00
incl. VAT plus shipping costs
Article No. 719934
€17.70
€10.90
incl. VAT plus shipping costs
Article No. 830894
Damasteel DS93X Odins Eye Damascus Steel
DS93X is a powder metallurgy Damascus steel. It is made from two different hardenable steel grades (RWL34 and PMC27). The two alloys are fused on smelting in more than 100 layers with no transition band and can therefore be regarded as a...
€164.70
€139.00
incl. VAT plus shipping costs
Article No. 831806
Damasteel DS93X Odins Eye Damascus Steel
DS93X is a powder metallurgy Damascus steel. It is made from two different hardenable steel grades (RWL34 and PMC27). The two alloys are fused on smelting in more than 100 layers with no transition band and can therefore be regarded as a...
€235.90
€199.00
incl. VAT plus shipping costs
Article No. 831807
Damasteel DS93X Munin Damascus Steel
DS93X is a powder metallurgy Damascus steel. It is made from two different hardenable steel grades (RWL34 and PMC27). The two alloys are fused on smelting in more than 100 layers with no transition band and can therefore be regarded as a...
€249.00
€214.00
incl. VAT plus shipping costs
Article No. 831839
Damasteel DS93X Draupner Damascus Steel
DS93X is a powder metallurgy Damascus steel. It is made from two different hardenable steel grades (RWL34 and PMC27). The two alloys are fused on smelting in more than 100 layers with no transition band and can therefore be regarded as a...
€197.10
€169.00
incl. VAT plus shipping costs
Article No. 831857
Damasteel DS93X Draupner Damascus Steel
DS93X is a powder metallurgy Damascus steel. It is made from two different hardenable steel grades (RWL34 and PMC27). The two alloys are fused on smelting in more than 100 layers with no transition band and can therefore be regarded as a...
€168.90
€144.00
incl. VAT plus shipping costs
Article No. 831858
Damasteel DS93X Draupner Damascus Steel
DS93X is a powder metallurgy Damascus steel. It is made from two different hardenable steel grades (RWL34 and PMC27). The two alloys are fused on smelting in more than 100 layers with no transition band and can therefore be regarded as a...
€245.30
€209.00
incl. VAT plus shipping costs
Article No. 831859
Arbortech AS175 Brick & Mortar Saw, Complete Set
The AS175 Power Saw offers extraordinary control and enables the efficient and low-dust cutting of a wide range of materials. It allows right-angled puncture cuts to be made without overlap in the corners. Adjacent masonry remains...
€1,249.00
€1,119.00
incl. VAT plus shipping costs
Article No. 740170
€11.30
€9.40
incl. VAT plus shipping costs
Article No. 740831
Merlin2 Cleaning Discs 3 Pieces
Removes all coats of paint and light oxidation residue. For use with a wide range of metal surfaces. Fits quick-change backing pad No. 715371 .
€8.40
€6.90
incl. VAT plus shipping costs
Article No. 715373
Merlin2 Cleaning Discs 3 Pieces
Removes all coats of paint and light oxidation residue. For use with a wide range of metal surfaces. Fits quick-change backing pad No. 715371 .
€8.70
€6.90
incl. VAT plus shipping costs
Article No. 715374
Olive-tanned Cowhide, Half Hide, Silky Grey
Soft, olive-tanned cowhide with a pleasant feel. The hides were taken from European cattle before being tanned and dyed in Germany complying with the strict environmental and sustainability requirements. The dyes do not contain any...
€284.00
€259.00
incl. VAT plus shipping costs
Article No. 831716
Stamps, Barbed Wire Motif, 4-Piece Set
With this stamp, you can emboss barbed wire-patterned edges and borders on leather. Closed contours are also possible. Content: Straight (10 mm) / straight with two thorns (13 mm) / straight with four thorns (13 mm) / curve
€27.30
€23.00
incl. VAT plus shipping costs
Article No. 708100
Jimmy Clewes Synthetic Sand
Colour powder without mineral components, meaning cutting tools do not go blunt and are easy to sharpen.
€10.20
€8.90
(Content: €317.86 / 1 kg)
incl. VAT plus shipping costs
Article No. 450517
€22.90
€18.90
incl. VAT plus shipping costs
Article No. 718384
€49.50
€39.00
incl. VAT plus shipping costs
Article No. 711306
AFK »Integral« Hunting Knife, Goldfield
A very handy and beautifully shaped hunting knife hand-forged from one piece of steel. The rustproof D2 steel used is characterised by its excellent edge-holding capacity and sharpness. The handle scales are accurately crafted, the...
€259.00
€229.00
incl. VAT plus shipping costs
Article No. 709710
Hegner Grinding Discs for Wood, Ø 200 mm
With Velcro coating, five discs each. Fits disc sander No. 740838 or other Ø 200 mm grinding discs.
€18.60
€15.90
incl. VAT plus shipping costs
Article No. 740840
Hegner Grinding Discs for Wood, Ø 200 mm
With Velcro coating, five discs each. Fits disc sander No. 740838 or other Ø 200 mm grinding discs.
€18.60
€15.90
incl. VAT plus shipping costs
Article No. 740841
€12.20
€9.90
incl. VAT plus shipping costs
Article No. 718466
€11.90
€8.90
incl. VAT plus shipping costs
Article No. 715327
Leather Sheath for Hunting Knife Saji Kawa Aka
Handmade robust cowhide sheath with belt loop, fits Hunting Knife Saji Kawa Aka No. 719268 .
€31.90
€29.00
incl. VAT plus shipping costs
Article No. 709884