König Holz & Harz Abrasive Paste, Fine, 190 g

High-quality abrasive pastes made from natural oils, orange oil, wax and mineral abrasives, as the perfect base for your surface finish. The abrasive paste is suitable for hardwood, stabilised woods and epoxy resin. Mainly intended for processing on the lathe. Pre-sand the surfaces as usual up to grit 400, apply abrasive paste (coarse) with a soft cloth (fast tearing, e.g. paper towels) with the lathe switched off. Then spread the paste at a speed of 800 to 1000 rpm until no more residue is visible on the cloth. After using the coarse abrasive paste or after pre-sanding up to grit 1000, repeat the process with the fine abrasive paste. Now the surface is finely sanded (approx. grit 10 000) and ready for your usual finish. The coarse grinding paste grinds from approx. grit 400 to 1000, the fine grinding paste from approx. grit 1000 to 10 000.