Nano Hone Lapping Plate Button Tech NL-8
The heavyweight of lapping plates
In contrast to conventional lapping plates, this product does not have a diamond coated surface, but raised cross-shaped metal buttons that have diamonds dispersed throughout their entire structure. These buttons are virtually indestructible and can be re-calibrated with a grinding machine up to five times even after years of use, for which we offer a corresponding service. This heavyweight plate weighs 1.3 kilograms and has an extra large surface for maximum ease of use. It is recommended for lapping any sharpening stones in the range of 400 grit to 30 000 grit. Flatness tolerance < 0.05 mm (after diamond coating). Approx. grit 220 (50 micron).
Diamond lapping plates have either a full-surface or an interrupted diamond coating. With lapping plates with interrupted diamond coating, not the plate's entire surface is brought to bear but only the virtually indestructible and sharp edges of each of the raised party of the pattern distributed over the plate’s surface.This design has the following advantages:
- Makes shaping a lot quicker thanks to allowing the abrasive slurry to quickly drain away
- Requires less force thanks to the smaller contact area
- Significantly longer lapping plate service life
- Extremely even surface and hence able to create even surfaces on the stone being resurfaced
Nano Hone
Nano Hone is an entity of HMS Enterprises Inc., which is headquartered in the USA and has a production site in Japan. Nano Hone has over 40 years experience in the field of sharpening, dressing and woodworking, and is dedicated to developing outstanding, innovative and high-quality sharpening products.
- Dimensions 240 x 60 x 20 mm
- Grit 220 (50 microns)
| Article no. | 711222 |
| Brand | Nano Hone |
Suitable for
Nano Hone Shaping Stone, Grit 400 (35 microns)
The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
€73.90
incl. VAT plus shipping costs
Article No. 711226
Nano Hone Sharpening Stone, Grit 1000 (15 microns)
The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
€79.90
incl. VAT plus shipping costs
Article No. 711227
Nano Hone Honing Stone, Grit 6000 (2 microns)
The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
€98.90
incl. VAT plus shipping costs
Article No. 711228
Nano Hone Shaping Stone, Grit 200 (70 microns)
The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
€65.90
incl. VAT plus shipping costs
Article No. 711249
Nano Hone Sharpening Stone, Grit 3000 (6 microns)
The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
€88.90
incl. VAT plus shipping costs
Article No. 711256
Nano Hone Polishing Stone, Grit 10 000 (1 microns)
The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
€135.90
incl. VAT plus shipping costs
Article No. 711257
Nano Hone Polishing Stone, Grit 30 000 (0.5 microns)
The hard bond is preferable for high-alloy tool steels. Coarse-grained alloy constituents (e.g. chromium and vanadium) in tool steels require a stone that wears slowly.
€249.00
incl. VAT plus shipping costs
Article No. 711568