Kirjes OrbiCut 40
Works quickly and efficiently even at low speed. Ball cutter diameter 40 mm for max. 3600 rpm. Not compatible with Kirjes Sanding System due to 11 mm shaft diameter.
For use in flexible drives, power drills and cordless screwdrivers. Designed for fast and efficient stock removal, the two replaceable HSS cutters produce extremely smooth surfaces that require minimal sanding. The ball allows smooth and controlled cuts, while the cutter projection of just 0.1 mm ensures optimum safety for the user. A perfect cutting tool for small and medium-sized hollowing projects.
Kirjes Sanding System
The quality and perception of any piece of work is largely influenced by its finish. Flat surfaces can easily be finished with a smoothing plane or sandpaper. However, concave or convex shapes, inner surfaces of rectangles and irregular shapes are much more difficult. So far, a machine finish was not possible while a hand surface was extremely time-consuming. This gap has been closed by the Swedish manufacturer Kirjes with its integrated sanding and polish system: it enables a great leap in quality and facilitates working.
A sleeve of highly flexible abrasive cloth is fitted on a cylindrical or dome-shaped rubber bulb which is then inflated with a special hand pump through an air valve on the shaft. Such pneumatic drum sanders are very elastic, perfectly conforming to any shape. In addition to sanding sleeves, brush sleeves for polishing are also supplied. They will give your workpiece a polished surface. All inflatable drum sanders are fixed to the drill chuck of a 130 cm flexible shaft. The perfect tool for inner surfaces of carved and turned objects, for hard-to-reach areas, spoons, musical instruments, sculptures, ornaments, wooden toys, jewellery, knife handles etc.
- Ø 40 mm
- Shaft diameter 11 mm
| Article no. | 707547 |
| Brand | Kirjes |
