Special Offer: MAFELL Plunge-cut Saw MT 55 CC MidiMAX in T-MAX + Guide Rail F160

The MT 55 CC and the MAFELL guide rail system F allow you to master perfect, repeatable cuts. With its powerful CUprex compact motor with 1400-watt rated input, this machine is optimally equipped for a maximum cutting depth of 57 mm (2 1/4 in.).
The nominal no-load speed can be adjusted between 3600 and 6250 1/min and allows you to cut solid wood, wood-based panels, plastics and non-ferrous metals. Always use a suitable saw blade for your particular material! The saw blade can be changed in no time at all: When you open the saw blade housing, the blade locks automatically. Remove the hex key, undo the screw, change the saw blade and close the housing.
A unique feature of this portable circular saw is the activatable scoring function. This allows sensitive material to be cut without tearout, just like a stationary machine with a scorer. The tilt range can be adjusted between -1° and +48°.
Your benefits:

• Facility for extremely fine adjustment of the cutting depth setting, e.g. when working with a resharpened blade or with Fermacell
• The closed saw blade cover and the slide bar at the saw-cut ensure a very low dust formation
• The MT 55 cc is equipped with a new CUprex-Compact motor for significantly elevated speeds and ample power in reserve
• The cutting depth can be set with millimeter precision. With or without a rail - simply turn the pointer to show the exact cutting depth
• For bevel cuts, the angle setting is fixed in two locations with half a turn of a single locking screw

Application:

• Cross-cutting and rip cuts
• Bevel cuts -1 to +48°
• Plunge cuts
• Compatible materials include solid wood, cement fiberboard, melamine resin panels (Trespa), OSB, gypsum fiberboard, plastics, façade boards and various board materials