Pégas Scroll Bandsaw SRP13 DUAL

The SRP13 DUAL bandsaw by Pégas combines two machines in one - a scroll bandsaw and a standard...
The SRP13 DUAL bandsaw by Pégas combines two machines in one - a scroll bandsaw and a standard bandsaw.
Switching between the classic blade guide and the Pégas precision guiding system takes just a few minutes.
Scroll bandsaw: Equipped with the world’s finest and most precise saw blades, this bandsaw enables intricate woodworking, comparable only to what is typically achieved with scroll saws. The specially developed precision guiding system for this machine features roller bearings with guide grooves tailored to the respective scroll bandsaw blade. This ensures that the ultra-thin scroll bandsaw blades, ranging from 1.02 to 3 mm in width, are perfectly guided, prevented from twisting, and capable of performing the most delicate cuts, even for complex shapes and tight radii of less than 2 mm.
Standard bandsaw: When converted and equipped with the included standard blade guide, blades ranging from 6 to 16 mm in width can be used. The wider and sturdier saw blades also facilitate rougher cutting tasks, rip cuts, and straight kerfs. This machine offers all the features typically expected from a bandsaw. The solid cast iron table can be tilted from -5° to +45° and contains a 19 mm T-slot for guiding the supplied mitre gauge (-60° to +60°). The rip fence made of aluminium profile has an integrated magnifying glass to make reading the mm/inch scale easier.
Further benefits:
  • The machine including the two doors is made completely of sheet steel
  • Safety switches on the doors prevent the machine from operating when a door is open
  • The on/off switch with undervoltage release prevents unintentional operation
  • Two blade speeds ensure optimal work results
  • Balanced aluminium wheels with rubber coating
  • High tare weight, approx. 70 kg, for excellent stability and smooth running
The included mounting saddle allows it to be attached to the Pégas SRP13 DUAL and used in combination with both bandsaw guides.
Further benefits:
  • The machine including the two doors is made completely of sheet steel
  • Safety switches on the doors prevent the machine from operating when a door is open
  • The on/off switch with undervoltage release prevents unintentional operation
  • Two blade speeds ensure optimal work results
  • Balanced aluminium wheels with rubber coating
  • High tare weight, approx. 70 kg, for excellent stability and smooth running

    Scope of delivery

    • Scroll bandsaw blade No. 9 (2305 x 1.34 x 0.44 x 2.43 mm)
    • Scroll bandsaw blade No. 12 (2305 x 2 x 0.5 x 2.85 mm)
    • Two bearing guides (each with a groove guide for bandsaw blades No. 9 & No. 12)
    • 12.5 mm standard bandsaw blade
    • Table inserts for fretwork, 2 pieces
    • Rip fence
    • Mitre gauge
    • Sheet steel base frame
    • Push stick
    • Operating tool
     
    more
    less
    Further details on the manufacturer

    Pégas

    Pégas

    High-quality saw blades made in Switzerland.

    • Made from first-class carbon steel
    • Heat-treated after setting the teeth, to provide optimum toughness and flexibility
    • Perfect tooth alignment
    • Suitable for manual use and in machines

    • Motor voltage 230 V / 50 Hz
    • Power input 750 W
    • Blade speed 360 and 720 m/min
    • Max. depth of cut 175 mm
    • Max. width of cut without fence 310 mm
    • Max. width of cut with fence 245 mm
    • Blade length 2300 mm
    • Blade width min./max. 1 to 16 mm
    • Table size 500 x 400 mm
    • Table height 1035 mm
    • Table tilt -5 to +45°
    • Wheel ø 320 mm
    • Dust extraction outlet 100 mm
    • Dimensions (L x W x H) 1625 x 890 x 700 mm (incl. base frame)
    • Weight 70 kg
    Article no. 716427
    Brand Pegas
    Freight forwarding goods - Delivery time 3-4 workdays within Germany.

    For delivery worldwide please contact our customer service at +49 (0)9931 4058-902.

    €1,199.00 per piece(s)

    Prices incl. VAT

    i

    plus shipping costs

    Remember
    Many other models
    Type Price Quantity
    Pégas Scroll Bandsaw SRP13 DUAL
      €1,199.00
     
    Plenty of accessories and spare parts

    Accessories

    UJK Bandsaw Buddy

    UJK Bandsaw Buddy

    Bandsaw Buddy is a unique alignment tool for parallel fences on bandsaws. Due to the convex running surfaces on the rollers, the saw band is distorted depending on the tension and settings. This is generally not visible to the naked eye....
    €33.90

    incl. VAT plus shipping costs

    Article No. 706599

    Silbergleit Dry Slip-additive, 250 ml

    Silbergleit Dry Slip-additive, 250 ml

    Anti-rust and non-stick coating with long-lasting effect thanks to its exceptional abrasion resistance. Easy application, e.g. with a cloth. Does not contain graphite or silicone. Areas of application As slip-additive: Invisible and...
    variants
    €10.90

    (Content: €43.60 / 1 litre)

    incl. VAT plus shipping costs

    Article No. 706178

    DICTUM Wax for Planes

    DICTUM Wax for Planes

    The DICTUM wax for planes is not only used to prevent metal planes from rusting with long-lasting effect, but also reduces the friction between the plane sole and the workpiece. The application of stains, oils or lacquers is not...
    €9.50

    (Content: €38.00 / 1 litre)

    incl. VAT plus shipping costs

    Article No. 810149

    BOW FeatherPRO Featherboard

    BOW FeatherPRO Featherboard

    Better cutting quality, as workpiece vibration is avoided. The rigid foam spring joints absorb energy and thus reduce the risk of recoil on router tables or circular saws. Easier material feed than with plastic or wooden featherboards,...
    variants
    €35.30

    incl. VAT plus shipping costs

    Article No. 727363

    Stationary Machines - Bandsaws

    Stationary Machines - Bandsaws

    The working methods, setting options as well as essential safety aspects of the bandsaw are presented in the usual detailed and descriptive manner. In addition the author gives important hints for the purchase decision: on which points...
    €38.00

    incl. VAT plus shipping costs

    Article No. 714408

    variants
    €24.90

    incl. VAT plus shipping costs

    Article No. 708734

    variants
    €24.90

    incl. VAT plus shipping costs

    Article No. 708735

    BOW PushPRO Push Stick

    BOW PushPRO Push Stick

    The high density foam at the tip of the push stick offers many advantages over wood or plastic. It absorbs vibrations, is skid-resistant and has a better grip, does not leave pressure marks on soft wood and does not splinter on contact...
    €28.20

    incl. VAT plus shipping costs

    Article No. 720997

    Table Inserts for Bandsaw BS 320-12, 10-Piece Set

    Table Inserts for Bandsaw BS 320-12, 10-Piece Set

    Table inserts made of plastic. 10-piece set.
    variants
    €4.40

    incl. VAT plus shipping costs

    Article No. 830612

    Push Stick

    Push Stick

    On circular bench saws, bandsaws or table routers, small and narrow workpieces must be guided with the push stick. Length 42 cm.
    €4.20

    incl. VAT plus shipping costs

    Article No. 727937

    Magnetic Base Light, Flexible Gooseneck, LED

    Magnetic Base Light, Flexible Gooseneck, LED

    An indispensable workshop accessory that is used especially for intricate work with bandsaws, drills, edge sanders and lathes. A powerful switchable magnetic base and a long flexible neck allow you to position the light source...
    €79.00

    incl. VAT plus shipping costs

    Article No. 715641

    MICROJIG ZEROPLAY Mitre Bar

    MICROJIG ZEROPLAY Mitre Bar

    The ZEROPLAY mitre bars enable the construction of highly precise mitre gauges and auxiliary devices. Simply insert them into the T-rail or U-rail, adjust the width, test, done! The two-part bar can be varied in width and thus adapted to...
    variants
    €20.80

    incl. VAT plus shipping costs

    Article No. 725028

    Adapter Bracket for Saw Blade Guide

    Adapter Bracket for Saw Blade Guide

    Bracket for upper saw blade guide, e.g. for BS320-12. The mounting bracket can also be used as an adapter for mounting the DICTUM Sanding Belt Guide No. 714784 to the Pégas SRP13 DUAL Scroll Bandsaw (No. 716427 ).
    €7.10

    incl. VAT plus shipping costs

    Article No. 801056

    DICTUM Sanding Belt Guide for Bandsaw BS 270-10/320-12

    DICTUM Sanding Belt Guide for Bandsaw BS 270-10/320-12

    Sawing and sanding with just one machine not only saves on investment costs, but also space in the workshop. The DICTUM Bandsaws can also be operated with sanding belts using the sanding belt guide. Switching from the saw blade guide to...
    variants
    €49.00

    incl. VAT plus shipping costs

    Article No. 714784

    Klingspor Abrasive Belt, GX 712 JF, 15 x 2280 mm, 3 Pieces, Grit 320

    Klingspor Abrasive Belt, GX 712 JF, 15 x 2280 mm, 3 Pieces,...

    Highly flexible and tear-resistant sanding belt with special dimensions suitable for the DICTUM Sanding Belt Guide for Bandsaws BS 320-12, No. 714784 . The GX 712 JF abrasive made of corundum has a synthetic resin bond on a JF blended...
    variants
    €16.50

    incl. VAT plus shipping costs

    Article No. 727284

    Klingspor Abrasive Belt, GX 712 JF, 20 x 2280 mm, 3 Pieces, Grit 320

    Klingspor Abrasive Belt, GX 712 JF, 20 x 2280 mm, 3 Pieces,...

    Highly flexible and tear-resistant sanding belt with special dimensions suitable for the DICTUM Sanding Belt Guide for Bandsaws BS 320-12, No. 714784 . The GX 712 JF abrasive made of corundum has a synthetic resin bond on a JF blended...
    variants
    €18.90

    incl. VAT plus shipping costs

    Article No. 727288

    Pégas Scroll Bandsaw Blade No. 5, 2305 x 1.02 x 0.36 mm, Tooth Spacing 1.88 mm

    Pégas Scroll Bandsaw Blade No. 5, 2305 x 1.02 x 0.36 mm, Tooth...

    The unique, extremely narrow Pégas scroll bandsaw blades are made of the highest quality steel and with state-of-the-art technology. They allow tight curves to be sawn with radii of up to 2 mm without burning the kerfs. The maximum...
    variants
    €34.90

    incl. VAT plus shipping costs

    Article No. 790094

    Pégas Ball Bearings for Scroll Bandsaw Blades No. 14, 2-Piece Set

    Pégas Ball Bearings for Scroll Bandsaw Blades No. 14, 2-Piece Set

    This roller bearing guide can only be implemented on the specially developed bandsaw blade roller guide system for Pégas scroll bandsaws. The guiding groove in the roller is adjusted to the respective fine-cutting saw blade. Fits No....
    variants
    €89.00

    incl. VAT plus shipping costs

    Article No. 716074