PantoRouter for Milling Motors Ø 43 mm

The original - for individual, precise, quick and simple working

The PantoRouter is a precision copy milling machine for a wide variety of wood joints. With the...
Fits milling motors with clamping collar Ø 43 mm.
The PantoRouter is a precision copy milling machine for a wide variety of wood joints. With the operating principle of a mechanical pantograph, the copy milling machine can travel in all three spatial axes. Apart from the working position (x-/y-axis), you can also exactly set the working depth (z-axis) or the drilling depth of the router bit. Depending on the diameter of the motor clamping collar, round-type routers such as AEG MF 1400 KE (P.R. Nr. 720557), Draper Expert MR1300 (P.R. Nr. 720556) or milling motors with 43 mm Euro clamping neck (P.R. Nr. 720757) can be used.
Thanks to templates you can also scan tenon diameters, dovetail shapes and distances, drilling patterns or freely designed contours. With the original templates you can mill e.g. mortise and tenon with one and the same setting and increase and decrease the accuracy without changing the template.
Copying pins with ball bearings in various diameters make it possible to adjust e.g. the size of a milling pattern without changing the template.
The router table is steplessly tiltable and enables milling, e.g. of angled tenons, grooves or dowel holes into mitre surfaces or also name signs.
Your benefits:
  • Height-adjustable mount for templates
  • Mortise and tenon templates enable fine tuning of the accuracy
  • Easily adjustable and precise scanning unit
  • Exact alignment of the milling motor
  • Tiltable machine table made of warp-resistant aluminium
  • Depth stop with scale
  • Light-weight yet warp-resistant construction
  • Horizontal workpiece attachment, allowing the processing of longer lengths
  • Almost no limits, thanks to template self-construction

The PantoRouter - the original:
The entire base is made of warp-resistant cast aluminium. A high-quality varnish guarantees permanent protection, even under extreme climatic conditions (salt water tested). A newly developed motor terminal enables an exactly perpendicular position to the workpiece. The machine table, tiltable up to 90°, offers versatile application options.

    Scope of delivery

    • PantoRouter with engine mount, fits milling motor with Ø 43 mm clamping collar, e.g. MAFELL FM 1000
    • V3 template holder with setting gauge for material thickness
    • Workpiece fence incl. clamping lever, pair
    • Workpiece fence incl. wing nut, pair
    • 5 horizontal tenon templates (A 1" / B 1.5" / C 2" / D 2.5" / E 3")
    • 2 vertical tenon templates (B-V 1.5" / D-V 2.5")
    • Copying pin, Ø 10 mm
    • Copying pin, Ø 15 mm
    • Copying pin, Ø 20 mm
    • Copying pin, Ø 22 mm
    • Centring pin
    • Depth stop with mm and inch scale

    Supplied without milling motor
     
    more
    less
    Further details on the manufacturer

    PantoRouter

    Buy PantoRouter products online at DICTUM.
    Article no. 720757
    Brand PantoRouter
    Ready to ship, delivery time 3-4 workdays within Germany
    €1,789.00 per piece(s)

    Prices incl. VAT

    i

    plus shipping costs

    Remember
    Many other models
    Type Price Quantity
    PantoRouter for Milling Motors Ø 43 mm
    PantoRouter for Milling Motors Ø 43 mm

    Fits milling motors with clamping collar Ø 43 mm.

    Article number 720757
      €1,789.00
     
    PantoRouter incl. MAFELL Milling Motor FM 1000 Price advantage
    PantoRouter incl. MAFELL Milling Motor FM 1000

    Incl. milling motor MAFELL FM 1000 with clamping collar Ø 43 mm.

    Article number 720755
      €1,979.00
     
    PantoRouter Starter Set incl. MAFELL Milling Motor FM 1000 Price advantage
    PantoRouter Starter Set incl. MAFELL Milling Motor FM 1000

    Incl. milling motor MAFELL FM 1000 with clamping collar Ø 43 mm and many accessories for milling the most important wood joints.

    Article number 721170
      €2,499.00
     
    PantoRouter for Milling Motors Ø 91.8 mm
    PantoRouter for Milling Motors Ø 91.8 mm

    Fits plunge router AEG MF 1400 KE with Ø 91.8 mm.

    Article number 720557
      €1,789.00
     
    Plenty of accessories and spare parts

    Accessories

    DICTUM Lever Clamp for Guide Rails, Jaw Opening 160 mm

    DICTUM Lever Clamp for Guide Rails, Jaw Opening 160 mm

    For vibration-proof clamping due to precisely manufactured, wear-resistant ratchet mechanism. The profile of the galvanised fixed bracket matches the 12 x 8 mm guide grooves. For secure fixing of guide rails and for clamping on machine...
    variants
     
    €36.50

    incl. VAT plus shipping costs

    Article No. 705643

    Featherboard for PantoRouter, 12 mm Comb Joints

    Featherboard for PantoRouter, 12 mm Comb Joints

    The milling featherboard is mounted on the template holder of the PantoRouter. The template can be scanned with a Ø 10 mm copying pin. Made of 4.45 mm galvanised steel. Length 400 mm. Incl. mounting screws. Suitable for PantoRouter.
    variants
    €46.80

    incl. VAT plus shipping costs

    Article No. 720567

    Centering Scale Fence for PantoRouter

    Centering Scale Fence for PantoRouter

    For perpendicular positioning of the workpieces on the router table. Incl. clamping screw. Fits PantoRouter.
    €98.00

    incl. VAT plus shipping costs

    Article No. 720568

    PantoRouter Dust Collection Hood with Brush Ring

    PantoRouter Dust Collection Hood with Brush Ring

    Enables dust-free working and extracts the shavings exactly where they are produced. Fits PantoRouter. Incl. assembly screws. Exhaust Nozzle Ø 34/40 mm.
    €79.70

    incl. VAT plus shipping costs

    Article No. 720569

    Copying Pin, Ø 22 mm

    Copying Pin, Ø 22 mm

    Copying pins with ball bearing are used for scanning the contours of templates (with the ball bearing). The diameter of all copying pins is 6 mm. Length 90 mm. Fits PantoRouter.
    variants
    €14.40

    incl. VAT plus shipping costs

    Article No. 720649

    Dovetail Cutter, Shaft Ø 8 mm, 8°

    Dovetail Cutter, Shaft Ø 8 mm, 8°

    For cutting dovetail mortises and joints. Made of carbide, which gives this cutter a long service life even when used with hardwood.
    €28.90

    incl. VAT plus shipping costs

    Article No. 720760

    HW Solid Tungsten Carbide Spiral Bits, Shank Ø 8 mm, Ø 12 mm, NL 50 mm

    HW Solid Tungsten Carbide Spiral Bits, Shank Ø 8 mm, Ø 12 mm,...

    Because of the spiral cutting edge, the bits cut with a pulling action, which produces a very clean-cut edge. The ground spiral also ensures efficient chip removal and enables routing with less pressure (reduced risk of breakage). For...
    variants
    €105.00

    incl. VAT plus shipping costs

    Article No. 720762

    NVR Switch with Europlug

    NVR Switch with Europlug

    The switch unit can be mounted on e.g. router or saw tables in order to easily switch the attached machines on or off. The machine cable is plugged into the switch box, which is connected to the power supply. The undervoltage release...
    €70.30

    incl. VAT plus shipping costs

    Article No. 707989

    Hold Down Clamp for DICTUM T-Track

    Hold Down Clamp for DICTUM T-Track

    Workpieces are securely clamped to milling templates or fixtures with hold down clamps. These are made of solid aluminium and fit all T-tracks with an inner dimension of 12.1 mm x 7.3 mm. A large star knob enables simple handling. With...
    €13.30

    incl. VAT plus shipping costs

    Article No. 727341

    Mortise and Tenon Templates, 7-Piece Set

    Mortise and Tenon Templates, 7-Piece Set

    5 different lengths of tenon templates with levelling tenons on the back for exact horizontal or vertical alignment. The outer contour of these templates is bevelled to allow fine adjustment of the fit. If the ball bearing is used to...
    €31.40

    incl. VAT plus shipping costs

    Article No. 720574

    Variable/Fixed Space Templates, Dovetails, 8-Piece Set

    Variable/Fixed Space Templates, 8-Piece Set

    The templates are attached to the PantoRouter template holder at equal or different distances to obtain even or irregular dovetail spacings. The lateral spacers allow even distances to be set without measuring when the stencils are...
    variants
    €44.90

    incl. VAT plus shipping costs

    Article No. 720941

    Klemmsia Slot Nut with External Thread

    Klemmsia Slot Nut with External Thread

    Practical slot nut for Klemmsia Hold-down Clamp Adapter Basic and Basic Mini. Suitable for PantoRouter No. 720556 , 720557 , 720757 , 720755 ; DICTUM Multifunction Table No. 707796 ; DICTUM T-Track No. 707764 , 707765 , 707766 ....
    €5.10

    incl. VAT plus shipping costs

    Article No. 708119

    Auxiliary Fence for PantoRouter

    Auxiliary Fence for PantoRouter

    Clamped on the router table, the fence allows any angle to be set. A T-slot on the fence edge allows the insertion of additional stoppers. Incl. clamping lever. Fits PantoRouter.
    €41.10

    incl. VAT plus shipping costs

    Article No. 720660

    Festool DOMINO, beech range DS 4/5/6/8/10 1060x BU

    Festool DOMINO, beech range DS 4/5/6/8/10 1060x BU

    The special shape in combination with expanding glue pockets and longitudinal grooves gives the dowels a secure grip. For absolutely twist-proof connections and maximum stability. Added to this is significantly faster processing: The...
    €254.00

    incl. VAT plus shipping costs

    Article No. 720942

    Festool DOMINO, beech D 10x50/85 BU

    Festool DOMINO, beech D 10x50/85 BU

    The special shape in combination with expanding glue pockets and longitudinal grooves gives the dowels a secure grip. For absolutely twist-proof connections and maximum stability. Added to this is significantly faster processing: The...
    variants
    €17.70

    incl. VAT plus shipping costs

    Article No. 706734

     

    Replacement parts

    Template Holder

    Template Holder

    Entirely made of aluminium. With three T-tracks and mm and inch scale. Fits PantoRouter.
    €80.30

    incl. VAT plus shipping costs

    Article No. 720560

    variants
    €17.70

    incl. VAT plus shipping costs

    Article No. 720559

    Centring Pin Ø 6/8 mm

    Centring Pin Ø 6/8 mm

    For centring the router position and the router table centre. Fits PantoRouter.
    variants
    €10.60

    incl. VAT plus shipping costs

    Article No. 720763