Power tools

7 of 25

MAFELL Collets

Fits MAFELL hand router LO 65 Ec.

€41.77

incl. VAT plus shipping costs

Article No. 721160K

See details

MAFELL Adapter ER 16 for Collet Chuck, incl. Union Nut ER 16

Adapter incl. union nut for Mafell systems. Shaft diameter 8 mm. For collet system ER16.

€76.04

incl. VAT plus shipping costs

Article No. 721144K

See details

Wixey Electronic Digital Readout Kit for the Height Adjustment...

The display developed for router lifts and router tables is attached to a clearly visible position on the router table. A 200 cm long data cable leads to the underside of the router lift, to which the measuring rail with sensor is...

€84.40

incl. VAT plus shipping costs

Article No. 721058

See details

Routing templates for Round and Bevelled Corners

Rounding or bevelling corners on table or furniture tops with the router or on the router table does not take as long as you think. The template holder can be mounted with four different radii and four bevels. Four positioning pins hold...

€49.00

incl. VAT plus shipping costs

Article No. 714606

See details

OZ8 Union Nut for MAFELL Milling Motor FM

Fits MAFELL Milling Motor FM.

€11.78

incl. VAT plus shipping costs

Article No. 721261K

See details

OZ8 Adapter for Collet Chuck

Fits MAFELL Milling Motor FM.

€51.41

incl. VAT plus shipping costs

Article No. 721262K

See details

Standard Collet OZ8 for MAFELL Milling Motor FM

Fits union nut OZ8 No. 721261K and MAFELL Milling Motor FM.

€23.56

incl. VAT plus shipping costs

Article No. 721255K

See details

Template Guide Accessory Set for Ultimate Router Base

Indispensable accessory for the Ultimate Router Base No. 714640 . Guide bushing 1-3/16 inch (30.2 mm) with guide bearing. Centring pin to exactly position guide bushings or to mount routers on e.g. adapter plates. Marking tool Ø 1 inch...

€24.90

incl. VAT plus shipping costs

Article No. 714639

See details

BOW FencePRO Featherboards, Pair

Better cutting quality, as workpiece vibration is prevented. The rigid foam spring joints absorb energy and thus reduce the risk of recoil on router tables or circular saws. Easier material feed than with plastic or wooden featherboards,...

€49.00

incl. VAT plus shipping costs

Article No. 715597

See details

MAFELL Cutter head, Ø 163 x 46 mm

Fits MAFELL Groove-Cutting Machine NFU 50.

€500.16

incl. VAT plus shipping costs

Article No. 721346K

See details

Replacement Compression Springs for FencePRO & FeatherPRO

Fits BOW FencePro (No. 715597 ) and FeatherPro (No. 715598 ). 4 pieces.

€14.90

incl. VAT plus shipping costs

Article No. 715600

See details

Threaded Ring for Guide Bush

Threaded ring for clamping American-style guide bushes. Fits Nos. 730889 , 745219 . An adapter may be necessary for use on European routers. Adapters for Festool and MAFELL routers: Festool OF 2200, No. 729990 Festool OF 1400, No. 729992...

€6.90

incl. VAT plus shipping costs

Article No. 730888

See details

Guide Bush, ⅜"

American-style guide bush. The bushing is clamped in the router chuck with the threaded ring No. 730888 . An adapter may be necessary for use on European routers. Adapters for Festool and MAFELL routers: Festool OF 2200, No. 729990...

€8.90

incl. VAT plus shipping costs

Article No. 730889

See details

UJK Guide Bush Adapter, Inch / Mafell LO 65 EC

American guide bush models can be used with the guide bush adapter for the MAFELL LO 65 EC router. Precision-milled from aluminium.

€33.90

incl. VAT plus shipping costs

Article No. 745220

See details

HW Solid Tungsten Carbide Spiral Bits, Shank Ø 8 mm, Ø 12 mm, NL 50 mm

HW Solid Tungsten Carbide Spiral Bits, Shank Ø 8 mm, NL 50 mm

Because of the spiral cutting edge, the bits cut with a pulling action, which produces a very clean-cut edge. The ground spiral also ensures efficient chip removal and enables routing with less pressure (reduced risk of breakage). For...

€105.00

incl. VAT plus shipping costs

Article No. 720762

See details

Disc Groove Cutters, 10-piece Set

With these five disc groove cutters with Ø 47 mm, you can make grooves in widths of 2, 3, 4, 5, 6 mm. Ball bearings in various diameters serve as depth stops. With the spacer rings supplied, it is also possible to mount two discs on the...

€195.00

incl. VAT plus shipping costs

Article No. 718956

See details

T-Slot Cutter, Chamfered

For the production of T-slots, e.g. for shelf support systems. Brackets, hooks, supports for slatted walls etc. can be inserted into the grooves. Whether tool wall, railing system for kitchens, niche panelling etc., the practical T-slots...

€84.90

incl. VAT plus shipping costs

Article No. 718957

See details

Reversible TCT Knives for MAFELL Surface Shaver PF 80

Fits MAFELL Surface Shaver PF 80.

€6.43

incl. VAT plus shipping costs

Article No. 721411K

See details

DICTUM TC Groove Cutters with Ground Base Blade, 6-piece Set

Flank cutting groove cutter with ground base blade. For grooving, rebating and slot milling. Suitable for softwood, hardwood and panel materials.

€97.00

incl. VAT plus shipping costs

Article No. 718569

See details

MAFELL Adapter sleeve 6.35 mm (1/4 Inch)

Collet for tool shanks with 6.35 mm diameter. Ground adapter sleeve, outer diameter 8 mm. Fits MAFELL router LO 55.

€22.49

incl. VAT plus shipping costs

Article No. 721462K

See details

MAFELL Template guide

Fits MAFELL router LO 55.

€26.78

incl. VAT plus shipping costs

Article No. 721464K

See details

Hoffmann Manual Dovetail Routing Machine MU-S

This handy router is versatile and flexible and thus ideal both on the construction site or in the workshop. It mills one exact keyway per working cycle for dovetail sizes W-0/-1/-2/-3. The workpiece is automatically clamped when the...

€1,399.00

incl. VAT plus shipping costs

Article No. 721471

See details

TC Trimming Bit, Ø 12 mm, Shank Ø 8 mm, Straight Cutting Edges

For clean machining of decorative layers, these cutters are ground exactly to ball bearing diameters. Can also be used as a copy milling cutter.

€28.70

incl. VAT plus shipping costs

Article No. 718009

See details

UJK Threaded Guide Bush Set, Stainless Steel

Set of threaded guide bushes made of stainless steel including two centring pins for the highest accuracy (in mm and inch) in the American style. This means the use and attachment of these bushes is exceptionally fast , and thanks to the...

€129.00

incl. VAT plus shipping costs

Article No. 745305

See details

MAFELL Expanding Groove Cutter Ø 163

Fits MAFELL Groove-Cutting Machine NFU 50.

€750.77

incl. VAT plus shipping costs

Article No. 721078K

See details

Festool Edge router OFK 500 Q-Plus R3

Chamfering, rounding off, profiling and grooving - evenly, cleanly and without splinters with the OFK 500 edge router. Weighs just 1.4 kg and, thanks to the ideal centre of gravity, is particularly handy, even for vertical and horizontal...

€465.00

incl. VAT plus shipping costs

Article No. 729831

See details

Magswitch SavR Featherboard for Mitre Slots

The featherboard for machine tables ensures safety and optimum workpiece guidance on bandsaws, circular bench saws and router tables with 16 mm and 19 mm mitre slots. The One-Flip lever clamp locks the slot nuts of the featherboard in...

€39.50

incl. VAT plus shipping costs

Article No. 711199

See details

Magswitch Stacked SavR Featherboard

Practical accessory for the Magswitch SavR Featherboard for Mitre Slots (No. 711199 ) that reliably presses flat or lying workpieces against rip fences. This Magswitch extension offers an additional featherboard with spacer to guide tall...

€30.70

incl. VAT plus shipping costs

Article No. 711268

See details

MAFELL Groove-Cutting Machine NFU 50

Groove cutting machine NFU 50 offers flexibility of use and is an all-rounder capable of executing an enormous range of timberconstruction tasks. An extensive range of accessories opens up further possibilities for day-to-day work. The...

€2,604.91

incl. VAT plus shipping costs

Article No. 721075K

See details

MAFELL Groove-Cutting Machine NFU 50

€3,439.10 €3,092.81

incl. VAT plus shipping costs

Article No. 721551K

See details

DICTUM Oscillating Spindle Sander SSO 140

The spindle sander is ideal for grinding curved edges and (circular) cut-outs. The surface-ground machine table made of solid grey cast iron is fully adjustable up to a 45° inclination, e.g. fem. The oscillation with 24 mm stroke avoids...

€499.00

incl. VAT plus shipping costs

Article No. 727403

See details

V-belt for DICTUM Belt and Disc Sander BTS 100/150

Spare V-belt suitable for Belt and Disc Sander BTS 100/150, No. 720805 , 721054 .

€4.20

incl. VAT plus shipping costs

Article No. 830477

See details

Graphite Grinding Pad

With self-adhesive back. Dimensions 305 x 105 mm. Fits belt sander No. 720805 , 721054 .

€6.30

incl. VAT plus shipping costs

Article No. 830412

See details

Sanding Disc Backing Pad with Velcro, Ø 150 mm

With self-adhesive back. Fits belt and disc sander No. 720805 , 721054 and other 150 mm grinding discs.

€5.50

incl. VAT plus shipping costs

Article No. 830453

See details

Mitre Gauge for Belt Disc Sander No. 720804

Mitre Gauges for Belt Disc Sanders

€6.30

incl. VAT plus shipping costs

Article No. 830400

See details

Grinding Stop for Belt Disc Sander

Fits. belt sander No. 720805 , 721054 .

€10.50

incl. VAT plus shipping costs

Article No. 830414

See details

Grinding Belt Cover for Deflection Roller

Made of transparent plastic. Fits belt grinder No. 720804 .

€3.80

incl. VAT plus shipping costs

Article No. 830402

See details

Belt Running Correction Set

Fits. belt sander No. 720804 .

€8.40

incl. VAT plus shipping costs

Article No. 830401

See details

Upper Deflection Roller for Grinding Belt

Incl. shaft. Fits belt grinder No. 720804 .

€15.60

incl. VAT plus shipping costs

Article No. 830409

See details

MAFELL Orbital Sander UVA 115 E in T-MAX

The MAFELL UVA 115 Es Vibration Absorbers effectively isolate the main and auxiliary handles. For sanding plastic or painted surfaces, the speed can be electronically adjusted and locked. This option avoids excessive heat and sticking of...

€694.96

incl. VAT plus shipping costs

Article No. 704041K

See details

MAFELL Universal Filter Bags UFB-1, 5-Piece Set

Fits item No. 704041 .

€19.28

incl. VAT plus shipping costs

Article No. 704024K

See details

Interface Pad for MAFELL Orbital Sander UVA-SA 10 (10 x...

Cheap protection for your orbital sander! The interface pad is velcroed between the sanding pad and the abrasive mesh and protects the sanding pad from mechanical abrasion and frictional heat. Then if something goes wrong during sanding,...

€11.78

incl. VAT plus shipping costs

Article No. 704059K

See details

Interface Pad for MAFELL Orbital Sander UVA-SA D Delta 105

€13.92

incl. VAT plus shipping costs

Article No. 704017K

See details

Abranet Abrasive Mesh Ø 150 mm, HD P 60, 20-Piece Set

Abranet Abrasive Mesh Ø 150 mm, Large Pack

Efficient, dust-free sanding while protecting your health! The open net structure of the Abranet Abrasive Mesh allows the sanding dust to be thoroughly extracted right from where it is created. This not only extends the lifespan of the...

€50.34

incl. VAT plus shipping costs

Article No. 704141K

See details

useit Superfinishing Pads, Ø 118 mm, 5-Piece Set

Smooth as glass - without changing pressure! The Superfinishing-Pad carries on where other abrasives reach their limit - giving you the desired effect every time. The multi-layered construction of each pad evens out variations in the...

€5.90

incl. VAT plus shipping costs

Article No. 720151

See details