TC Classic Roman Ogee Bit with Ball Bearing, Shank Ø 8 mm, R...
Classic Roman profile with step and two identical radiuses. The step interrupts the swing of the two opposite radiuses and emphasises the middle of the profile.
€63.80
incl. VAT plus shipping costs
Article No. 717785
TC Roman Ogee Bit with Ball Bearing, Shank Ø 8 mm, R 6.35 mm,...
Roman profile with two identical radiuses, without rebate. Also suitable as a cove bit.
€52.80
incl. VAT plus shipping costs
Article No. 717782
TC Ogee Bit with Ball Bearing, Shank Ø 8 mm, R 4.8 mm, Ø 31.8 mm
Ogee profile with two identical radiuses. Also suitable as a rounding-over bit.
€56.60
incl. VAT plus shipping costs
Article No. 717781
TC Panel-Raising Bit with Ball Bearing, Shank Ø 8 mm, Ogee, Ø...
Elegantly curved ogee profile for classic door and body panels. Profile depth 19 mm. For safe cutting and clean results, we recommend cutting at a low speed (max. 12,000 rpm) and in several passes on a router table. Ideal addition to our...
€87.10
incl. VAT plus shipping costs
Article No. 717778
TC Cavetto Bit with Ball Bearing, Shank Ø 8 mm, R 6.35 mm, Ø...
For cavetto profiles, concave radius with step and rebate.
€59.90
incl. VAT plus shipping costs
Article No. 717678
TC Straight Plunge Cutters, Shank Ø 8 mm
Bottom- and side-cutting straight cutter with soldered-in TC centre tip. For grooving, rebating and mortising. Suitable for plunge. For work in abrasive materials such as particle boards, MDF, plywood, and hardwood.
€29.30
incl. VAT plus shipping costs
Article No. 717673
TC Dovetail Cutter, Shank Ø 8 mm, 14°, Ø 14.3 mm
Bottom- and side-cutting dovetail shaped cutter for milling dovetail corner joints and sliding dovetail joints. To embed miter slot tracks with a 14° dovetail shaped section like the UJK dovetailed mitre slot track No. 706584 . For work...
€27.40
incl. VAT plus shipping costs
Article No. 717791
TC Dovetail Cutter, Shank Ø 8 mm, 17°, Ø 20 mm
With this dovetail cutter for use with a router, you can not only make joints more quickly and precisely, but also a lot more easily. The router cuts the grout into the wood and the matching sliding dovetail is added to the counterpart...
€37.90
incl. VAT plus shipping costs
Article No. 717792
Dovetail Cutter, Shaft Ø 8 mm, 8°
For cutting dovetail mortises and joints. Made of carbide, which gives this cutter a long service life even when used with hardwood.
€28.90
incl. VAT plus shipping costs
Article No. 720760
UJK Precision Mitre Gauge & Fence
This mitre gauge system is made from 5 mm steel plate and features positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90°. Simple to adjust with a spring loaded plunger stop and able to be set at any other angle between 0-90° as...
€164.00
incl. VAT plus shipping costs
Article No. 706583
UJK Hold Down Clamp
Excellent for making jigs. These hold down clamps are designed to be used with the ujk T-tracks. The large star knob allows workpieces to be secured more easily. When used with the ujk T-tracks, this results in a max. clamping width of...
€24.90
incl. VAT plus shipping costs
Article No. 706580
UJK Router Table Insert Plate
This 10 mm aluminium insert plate for router tables measures 229 x 305 and is designed to fit the UJK Technology router table tops. It is supplied with a removable central insert ring with a 38 mm diameter hole and a wrench. This...
€135.00
incl. VAT plus shipping costs
Article No. 706574
UJK Universal T-Track
A very useful aluminium T-Track which can be utilized for all manner of routing jigs, clamps and devices. Bar cross-section external dimensions 19 x 9.5 mm, slot 8.9 x 6.4 mm and T-section 13.6 mm wide. Available in 610 mm and 915 mm...
€22.50
incl. VAT plus shipping costs
Article No. 706581
UJK Quick Stop for Fence Assemblies
Device that attaches to the top of your ujk router table fence and locks in place at a suitable position for the creation of stopped chamfers or rebates. You could leave it permanently attached to the fence as it can be flipped up out of...
€45.90
incl. VAT plus shipping costs
Article No. 706579
UJK Twist-Lock Insert Ring
The standard central insert supplied with the ujk Technology router elevator or ujk router table insert plates has a 38 mm diameter central hole. With additional central hole sizes the space between the cutter being used and the edge of...
€39.90
incl. VAT plus shipping costs
Article No. 706575
UJK Threaded Guide Bush Set
Eight American-style threaded guide bushes, millimetre versions (Ø 10, 12, 14, 16, 18, 20, 24, 30 mm). An adapter may be necessary for use on European routers. Adapters for Festool and MAFELL routers: Festool OF 2200 (No. 729990 )...
€61.00
incl. VAT plus shipping costs
Article No. 745219
UJK Feather Board Pair
Featherboards for safer routing. They simply attach to your router table or fence with the supplied T-bolts and provide extra support for the workpiece as it is being passed across the cutter. The amount of applied pressure is sustained...
€29.90
incl. VAT plus shipping costs
Article No. 706577
Switch Magnetic MagJig
Fits Magswitch Universal Mounting Base No. 711171 for self-construction of auxiliary e nd stops, featherboards, deflectors etc. For additional safety you should attach at least two magnets to each device.
€32.30
incl. VAT plus shipping costs
Article No. 711177
Magswitch Riser, 4-Piece Set
Four risers with a height of 24 mm, mounting screws included. Fits Magswitch Universal Mounting Base No. 711171 , Magswitch Workholding System Starter Package No. 711165 and Magswitch Pro Table Featherboard No. 711173 .
€12.50
incl. VAT plus shipping costs
Article No. 711176
Magswitch Universal Featherboard
A flat profile and featherboards on both sides for a more universal application. Can be used on both sides of a guide fence, on clockwise and counter-clockwise turning cutting edges, on ferromagnetic machine tables and parallel end...
€49.90
incl. VAT plus shipping costs
Article No. 711174
Magswitch Pro Table Featherboard
The position of the magnets on the back optimises the hold force, even on machine tables with milled T-tracks. Suitable for thicker materials. Contains two MagJig magnets, each with 68 kg hold force. Optional accessories extend the area...
€67.50
incl. VAT plus shipping costs
Article No. 711173
Magswitch Featherboard
Featherboard usable on both sides. On the left or right side of saw blades, on milling tables or machine end stops, on clockwise and counter-clockwise turning cutting edges. Fits Magswitch Universal Mounting Base No. 711171 and Magswitch...
€21.20
incl. VAT plus shipping costs
Article No. 711172
Magswitch Universal Mounting Base
The mounting base is the core of the Magswitch clamping system. Small dimensions enable the use on small metal surfaces. For attaching a variety of pressure devices such as Magswitch Featherboard No. 711172 Magswitch Vertical...
€26.30
incl. VAT plus shipping costs
Article No. 711171
Magswitch Universal Fence, 457 mm
A highly versatile fence made of a warp-resistant aluminium profile. Various T-tracks in the aluminium fence enable the use of diverse machine clamps, hold-down clamps, stoppers, etc. Four T-tracks on each side for tenon blocks and...
€52.70
incl. VAT plus shipping costs
Article No. 711170
Magswitch Thin Stock Guide
One side is a moulded step for holding down materials with a thickness of 3 mm, 6.3 mm, 9.5 mm (⅛, ¼ and ⅜ inch). A sloped side holds down any material thickness up to 24 mm. An adjustable roller offers additional pressing options,...
€24.90
incl. VAT plus shipping costs
Article No. 711169
Magswitch Dual Roller Guide
Ball-bearing steel rollers on both ends of the guide provide firm pressure along with optimum roll and sliding properties. Ideal for rip cutting on bandsaws, as an auxiliary end stop for horizontally positioned or large workpieces on...
€41.70
incl. VAT plus shipping costs
Article No. 711168
Magswitch Universal Guide
The ball-bearing steel rollers provide firm pressure along with optimum roll and sliding properties. The angled end stop enables the simple infeed/outfeed of the workpiece on the tool. Ideal for rip cutting on bandsaws, spindle sanders...
€28.90
incl. VAT plus shipping costs
Article No. 711167
Magswitch Vertical Featherboard
If you use the Featherboard (No. 711172 ) or the Pro Machine Table Featherboard (No. 711173 ), the spring is attached with two brackets in a vertical position to press the workpiece against the machine table. If you work in a horizontal...
€23.50
incl. VAT plus shipping costs
Article No. 711166
Magswitch Workholding System Starter Package
For improved safety and perfect work results. The rotatable featherboard can be adjusted to clockwise and counter-clockwise turning cutting edges. The base plate offers many possible ways to attach optional accessories according to the...
€76.90
incl. VAT plus shipping costs
Article No. 711165
T-Track Set with Workpiece Clamps
Set of 2 T-tracks with matching rail ferrules (2 pieces). Ideal for mounting fixtures, e.g. clamping and routing jigs. The shallow rail cross-section permits mounting even in weak sheet material. Maximum clamping height 50 mm, radius 16...
€49.50
€41.90
incl. VAT plus shipping costs
Article No. 727361
TC Dovetail Cutter, Shank Ø 8 mm, 14°, Ø, 12,7 mm
Base and flank cutter in dovetail form for milling dovetail-shaped rabbets and producing auxiliary devices and stops for the Matchfit dovetail screw clamps No. 718006 and No. 718007 . Suitable for hardwood, densified wood, wood materials...
€27.10
incl. VAT plus shipping costs
Article No. 717798
MAFELL Reversible Knife 14 x 14 x 2 mm
Fits MAFELL cutter head Ø 163 x 60 mm and expanding groove cutter Ø 163 x 22-40 mm.
€6.43
incl. VAT plus shipping costs
Article No. 721073K
€73.90
incl. VAT plus shipping costs
Article No. 721076K
€500.16
incl. VAT plus shipping costs
Article No. 721077K
€49.27
incl. VAT plus shipping costs
Article No. 721079K
€502.30
incl. VAT plus shipping costs
Article No. 721080K
€278.46
incl. VAT plus shipping costs
Article No. 721081K
€278.46
incl. VAT plus shipping costs
Article No. 721074K
MAFELL Adapter for Hand Router LO-FA
Guide rod length 450 mm, milling radius 97-380 mm, height compensation 6 mm, bore diameter circle pin 4.5 mm, adjustment stop jaws 0-54 mm. Suitable for MAFELL LO 65 Ec router.
€249.54
incl. VAT plus shipping costs
Article No. 721064K
Magswitch Universal Featherboard Pro
Featherboard with two integrated, finely adjustable stops. Specially designed for work on the circular saw. The two stops can be adjusted independently of each other in order to position the workpiece exactly above the saw blade, e.g....
€88.30
incl. VAT plus shipping costs
Article No. 711198
Mortise and Tenon Templates, Segmented, 11-Piece Set
The choice of segments allows the length of the slots or grooves to be set in 0.5 inch increments. Different end pieces enable you to produce rounded or square tenons. Fits PantoRouter. Includes: 4 round end pieces, 2 square end pieces,...
€42.20
incl. VAT plus shipping costs
Article No. 721164
Mortise Templates, 6-Piece Set
The milling travel can be infinitely adjusted by means of the movable stoppers. Maximum template length 400 mm. Fits PantoRouter. Includes: 2 mortise templates, each 200 mm long, 4 stoppers with scale in mm and inch.
€45.90
incl. VAT plus shipping costs
Article No. 721165
Triple Mortise and Tenon Template
Mill a double or triple tenon with only one template. Groove length 33-37 mm, groove spacing 47 mm. Fits PantoRouter.
€22.30
incl. VAT plus shipping costs
Article No. 721166
Mortise and Tenon Template, Loop
For mortise and tenon joints with a loop-shaped cross-section. Template size: 137 x 52 mm. Fits PantoRouter.
€21.50
incl. VAT plus shipping costs
Article No. 721167
Mortise and Tenon Template, Rhombus
For mortise and tenon joints with a rhombus-shaped cross-section. Template size: 126 x 47 mm. Fits PantoRouter.
€21.50
incl. VAT plus shipping costs
Article No. 721168
Single Dowel Templates, 4-Piece Set
The dowel templates can be used to drill dowel holes with repeatable accuracy or to mill round tenons. Fits PantoRouter.
€20.60
incl. VAT plus shipping costs
Article No. 721169
Milescraft »SmallCircleCompass« Router Circle Cutter
With the SmallCircleCompass, you can expand the capabilities of your router. It facilitates milling small circles from 38 mm (1.5 inch) to 305 mm (12 inch) in diameter. With the included TurnLock base plate, this product is compatible...
€36.90
incl. VAT plus shipping costs
Article No. 714522
€37.49
incl. VAT plus shipping costs
Article No. 721137K