€49.27
incl. VAT plus shipping costs
Article No. 721354K
DICTUM Precision Guide Roller
Replacement rollers incl. shaft and shims for DICTUM BSF Precision Belt Guides (No. 729409 and No. 729427 ).
€27.00
incl. VAT plus shipping costs
Article No. 729412
OFFER: MAFELL ERIKA 85 Ec, Sliding Table, Extension T. +...
If the ERIKA 70 Ec cannot handle the required cutting height, there is always its "big sister" - the ERIKA 85 Ec, ideal for large workpieces with a cutting height of up to 85 mm (3 3/8 in.). The unique suction channel concentrates the...
€5,418.07
€5,117.00
incl. VAT plus shipping costs
Article No. 721361K
€22.90
incl. VAT plus shipping costs
Article No. 727964
€3.90
incl. VAT plus shipping costs
Article No. 830512
€12.90
incl. VAT plus shipping costs
Article No. 830498
Tensioning Knob for DICTUM Bandsaw
Hand knob for tensioning the saw blade. Fits bandsaws Nos. 727447 , 727448 .
€4.20
incl. VAT plus shipping costs
Article No. 830507
€4.90
incl. VAT plus shipping costs
Article No. 830504
Brass Guide Pin for DICTUM Bandsaw BS 200-08 (No. 727446)
Fits DICTUM Bandsaw BS 200-08 (No. 727446 ). Two pins are needed each for the upper (No. 830494 ) and the lower (No. 830493 ) guide.
€1.90
incl. VAT plus shipping costs
Article No. 830493
MAFELL Cordless Cross-Cutting System KSS 40 18M bl
Mafell has not reinvented cross-cutting - but made it easier and more portable. And with the new KSS 40 18M bl, we have even added a battery: one that delivers what it promises - innovative battery technology for maximum performance....
€887.74
incl. VAT plus shipping costs
Article No. 721099K
Dust Port for Bandsaw
Incl. internal protective grid. Fits DICTUM Bandsaw BS 270-10 (No. 727447 ) and BS 320-12 (No. 727448 ).
€4.20
incl. VAT plus shipping costs
Article No. 830502
Table Insert for Bandsaw BS 360-14, 1 Piece
Aluminium table insert suitable for DICTUM Bandsaw BS 360-14.
€4.90
incl. VAT plus shipping costs
Article No. 801007
Saw Blade for Sabre Saw
Saw blade with the precision of a Japanese saw for clean trimming cuts across the grain in soft and hard woods, as well as glued wood and sheet materials. The teeth are extremely wear-resistant for high durability and performance. Even...
€9.90
incl. VAT plus shipping costs
Article No. 712711
Mitre Gauge with Guide Rail, 150 cm
This mitre gauge with guide rail makes formatting and trimming wood-based materials, plaster fibreboards and insulating panels, etc. much easier.. Set the required angle quickly on the rail, saw, done. Without any scribing. Most common...
€454.00
incl. VAT plus shipping costs
Article No. 716395
Mitre Gauge with two Guide Rails
This mitre gauge with guide rail makes formatting and trimming wood-based materials, plaster fibreboards and insulating panels, etc. much easier. Quickly set the required dimensions and angles on the rail, saw, done. Without any...
€744.00
incl. VAT plus shipping costs
Article No. 716396
Cross-cut Rail, 510 mm
With this mitre gauge, floorboards, parquet, planks, squared timber, etc. can be quickly, easily and precisely trimmed. Set the required dimensions and angles on the rail, saw, done. Without any scribing. Most common plunge-cut saws...
€392.00
incl. VAT plus shipping costs
Article No. 716398
Carrying Case for Mitre Gauge with Guide Rail
This bag securely stores and transports any fences and guide rails. Suitable for Mitre Gauges with Guide Rail Nos. 716395 , 716396 , 716397 .
€77.30
incl. VAT plus shipping costs
Article No. 716399
Splinter Guard for Guide Rails
For replacing the splinter protection lip on guide rails. Length 600 cm. Fits guide rails Nos. 716395 , 716396 , 716397 .
€28.60
incl. VAT plus shipping costs
Article No. 716400
DICTUM Sanding Belt Guide for Bandsaw
Sawing and sanding with just one machine not only saves investment costs, but also space in the workshop. The DICTUM BS 200-08 Bandsaw (No. 727446 ) can also be operated with sanding belts using the sanding belt guide. Switching from the...
€39.50
incl. VAT plus shipping costs
Article No. 714776
MAFELL Cordless Portable Circular Saw K 65 18M bl
With the compact and ultra-performing K 65 CC, you can achieve superb quality cuts at depths of up to 67 millimeters - and this from a portable circular saw with the best power-to-weight ratio in its class. It offers all the weight and...
€831.81
incl. VAT plus shipping costs
Article No. 721112K
Magswitch SavR Push Block
Compared to standard push sticks, the SavR with its 220 mm long base prevents tearing or fluttering, especially with narrow and small workpieces. The MDF base is attached to the ergonomically shaped handle with two robust nylon screws...
€27.90
incl. VAT plus shipping costs
Article No. 711200
Replacement Push Block Bases for Magswitch SavR Push Block, 2...
MDF push block bases, four pieces, incl. nylon screws, suitable for No. 711200 .
€24.90
incl. VAT plus shipping costs
Article No. 711260
MAFELL Portable Circular Saw K 85 Ec
The new MAFELL portable circular saw combines power and precision with ease of use and ergonomic design. These properties transform the machine into a unique system. Sheer power and high torque take on a whole new meaning with the new...
€1,093.61
incl. VAT plus shipping costs
Article No. 721068K
MAFELL Cordless Cross-Cutting System KSS 60 18M bl
With their low weight and cutting depths of up to 67 mm on the track, MAFELL’s new, powerful cross-cutting systems are making a big impact when it comes to interior work, for example. In addition, the innovative, powerful battery...
€1,216.18
incl. VAT plus shipping costs
Article No. 721105K
OFFER: MAFELL Plunge-cut Saw MT 55 CC MidiMAX in T-MAX incl....
With its powerful CUprex compact motor with 1400-watt rated input, this machine is optimally equipped for a maximum cutting depth of 57 mm (2 1/4 in.). The nominal no-load speed can be adjusted between 3600 and 6250 1/min and allows you...
€1,009.12
€891.31
incl. VAT plus shipping costs
Article No. 721129K
MAFELL Hand Router LO 55 in MAX3
Want to know what a whole new world of versatility looks like? Then cast a glance at the LO 55. In view of its exemplary operation, it’s the ideal partner for every task both in the workshop and on site. Discover the broad application...
€772.31
incl. VAT plus shipping costs
Article No. 721461K
UJK Professional Router Table
There are many complex routing operations that can only be carried out using a table set-up. The table tops are designed to accept a router elevator and a table insert plate and when fitted with this unit you will have an excellent...
€1,139.30
incl. VAT plus shipping costs
Article No. 706571
UJK Compact Router Table, Cast Iron Table Top
The compact router table, with its robust substructure, massive high-quality machine tabletop made of vibration-absorbing cast iron and precision router fence made of thick-walled hard-anodized aluminium profile offers an unbeatable...
€699.00
incl. VAT plus shipping costs
Article No. 706585
UJK Router Elevator
Raising and lowering a router in a table set-up can be a chore if you have to reach under the table each time you need to change the depth of cut. Being able to carry out this operation from above the table makes work so much easier. The...
€549.00
incl. VAT plus shipping costs
Article No. 706573
MAFELL Hand Router LO 65 Ec in T-MAX
Sheer power and high torque take on a whole new meaning with the high-output CUprex motor. It offers performance-optimized digital electronics and newly developed control technology. Its speed is continuously variable according to the...
€1,230.46
incl. VAT plus shipping costs
Article No. 721396K
MAFELL Edge Router KF1000
Continuously variable cutting speed for optimal adjustment. Large contact table allows steady machining, even of beveled edges. Plug-in fence serves as reliable guide when machining corners. With sensitive materials, a friction ring...
€614.04
incl. VAT plus shipping costs
Article No. 721090K
MAFELL Surface Shaver PF 80 in T-MAX
The surface shaver PF 80 developed by MAFELL bears the quality seal of a product, »Made in Germany«. Thanks to outstanding quality and well-conceived details, you can depend on the MAFELL surface shaver. The speed can be infinitely...
€1,129.31
incl. VAT plus shipping costs
Article No. 721397K
DICTUM TC Rounding Router Bits, 6-Piece Set
Using different cutting depths, you can cut soft curves as well as rebated curves (German moulding) with the same bit. 2 additional slots for shaft Ø 8 mm in the case make it possible to extend the set with further milling cutters. The...
€119.00
incl. VAT plus shipping costs
Article No. 718412
DICTUM TC Router Bits
Optimum selection of premium tungsten carbide router bits at a set price. With this combination of the most common router bits almost all tasks can be mastered.
€144.80
incl. VAT plus shipping costs
Article No. 718410
DICTUM TC Slot Cutters, Extra Long, TC Centre Tip, 6-Piece Set
Bottom- and side-cutting slot cutter with soldered-in TC centre tip. For cutting grooves, rebates and slots and for drilling. Suitable for hardwoods, particle boards, MDF and plywood.
€149.00
incl. VAT plus shipping costs
Article No. 718414
Hold Down Clamp for DICTUM T-Track
Workpieces are securely clamped to milling templates or fixtures with hold down clamps. These are made of solid aluminium and fit all T-tracks with an inner dimension of 12.1 mm x 7.3 mm. A large star knob enables simple handling. With...
€13.30
incl. VAT plus shipping costs
Article No. 727341
DICTUM TC Profile, Counterprofile & Raised Panel Bits, 3-Piece...
The 3-part bit set eliminates the tedious changing of profile cutters on the arbour, so all you need to do is adjust the height. Classic Roman profile. Compatible raised panel bit with Karnis profile. With the bearing you always guide...
€235.90
incl. VAT plus shipping costs
Article No. 718413
DICTUM T-Track
The T-Track is indispensable for mounting fixtures and jigs, for such as clamping boards or milling templates. With the aid of hold down clamps, e.g. No. 727341 , slot nuts or bolts can be quickly and securely clamped and fixed to...
€15.70
incl. VAT plus shipping costs
Article No. 707764
DICTUM HW T-track Cutter, Set
For milling T-tracks, e.g. in workbench tops. The dimensions are matched to the heads of the hex screws with metric thread. These can be inserted directly into the milled grooves without aluminium rails. Also suitable for slot nuts and...
€92.00
incl. VAT plus shipping costs
Article No. 718407
DICTUM HW Edge Banding Shaper Cutter, 2-piece Set
For stable glue joints when attaching edge-glued and glued-in strips, for width joints and mitres. The profile and counter profile enlarge the glued area and create a mechanical connection between the components.
€179.00
incl. VAT plus shipping costs
Article No. 718409
€72.83
incl. VAT plus shipping costs
Article No. 721091K
Variable/Fixed Space Templates, Dovetails, 8-Piece Set
The templates are attached to the PantoRouter template holder at equal or different distances to obtain even or irregular dovetail spacings. The lateral spacers allow even distances to be set without measuring when the stencils are...
€44.90
incl. VAT plus shipping costs
Article No. 720941
Variable/Fixed Space Templates, Comb, 8-Piece Set
The templates are attached to the PantoRouter template holder at equal or different distances to obtain even or irregular dovetail spacings. The lateral spacers allow even distances to be set without measuring when the stencils are...
€32.20
incl. VAT plus shipping costs
Article No. 721163
€50.34
incl. VAT plus shipping costs
Article No. 720953K
MAFELL Reducing Sleeves
Ground reducing sleeves. Fits MAFELL Milling Motor FM 1000 WS (No. 720858K ).
€22.49
incl. VAT plus shipping costs
Article No. 720949K
Fisch Kurvenlinfix
For quick, precise and clean cutting of individual curves, arches, cut-outs and special forms. The highly flexible but tough and absolutely unbreakable plastic template is screwed on in the required shape to act as a fence for the...
€98.00
incl. VAT plus shipping costs
Article No. 707470
Fisch Kurvenlinfix mini
For quick, precise and clean cutting of individual curves, arches, cut-outs and special forms. The highly flexible but tough and absolutely unbreakable plastic template is screwed on in the required shape to act as a fence for the...
€54.20
incl. VAT plus shipping costs
Article No. 707580
MAFELL Milling Motor FM
The MAFELL milling motors were developed and are made in Germany. Their high quality standard and clever details make the FM 800 and the FM 1000 the best possible workmate in their performance class. Advantages: Variable digital...
€273.70
incl. VAT plus shipping costs
Article No. 720876K