Axminster Workshop AW50E Portable Dust Collector
The AW50E is designed as a dedicated alternative to using a domestic vacuum cleaner for extraction in a small home workshop. The 50-litre drum is fitted with a 2-stage filter comprising a cartridge filter and outer paper filter. It...
€140.20
incl. VAT plus shipping costs
Article No. 745276
Axminster Workshop AW82E Dust Extractor
The AW82E is a compact, mobile chip extractor for use around a small workshop. It is powered by a 1.1 kW induction motor, which produces quite a substantial airflow of 1050 m³/h. The better-than-average performance makes it perfect for...
€298.20
incl. VAT plus shipping costs
Article No. 745281
Axminster Workshop AW153E Dust Extractor
This is the largest extractor in the Axminster Workshop range. The 1.5-kW motor gives an airflow of 1165 m³/h using 100 mm hose and 1720 m³/h using 125 mm hose. The AW153E has a single 125 mm inlet and comes with a twin 100 mm adaptor...
€381.70
incl. VAT plus shipping costs
Article No. 745282
Axminster Professional AP50E Dust Extractor
This wall mounted extractor is perfectly suited to small workshops. It is especially suited to situations where floor space is at a premium. Well-constructed and efficient, its 750 W motor generates 920 m³/h of airflow and is fitted with...
€585.00
incl. VAT plus shipping costs
Article No. 745283
Axminster Professional AP170E Dust Extractor
The AP170E is a well-designed mobile dust extractor that comes fitted with a fine dust cartridge filter as standard. The cartridge filter increases the potential use of this machine to include sanders as well as saws, planers, etc. The...
€994.00
incl. VAT plus shipping costs
Article No. 745284
Axminster Workshop Extraction Hose Kit, Ø 63 mm x 2 m
Flexible extraction hose with steel wire reinforcements and rubber cuffs at the ends. Ideal for those with a single mobile extractor used on various machines around the workshop. The flexible rubber cuffs form an easy, quick and close...
€70.30
incl. VAT plus shipping costs
Article No. 745279
Main Filter Cartridge for Axminster AW50E Portable Dust Collector
Fits Axminster Workshop AW50E Portable Dust Collector (No. 745276 ).
€26.00
incl. VAT plus shipping costs
Article No. 745277
Wire Spring Hose Clamps, 2-piece Set
These spring-type hose clamps allow quick changing of suction hoses from one machine to another. Operable with one hand, the two levers can be pressed together to release the clamp. Ideal for small workshops when one suction hose is used...
€11.90
incl. VAT plus shipping costs
Article No. 730892
Hose Connector
Connecting element for two hoses or pipelines or for connecting a hose or pipeline with an extraction nozzle of the same diameter.
€4.20
incl. VAT plus shipping costs
Article No. 730895
Hand Gate Valve
A gate valve can be used to close hoses and pipes, e.g. to temporarily isolate unused machines from an extraction hose. This increases the low pressure or the suction capacity on the machines used.
€6.90
incl. VAT plus shipping costs
Article No. 730896
Hose Reduction
Connecting element for two hose or pipelines of different diameters, or for connecting a hose or pipeline with suction nozzles of different diameters.
€4.90
incl. VAT plus shipping costs
Article No. 730900
€8.90
incl. VAT plus shipping costs
Article No. 730904
Dust Collection Port, Inclined
Connection piece with flange for mounting on machine housings. The slanted nozzle allows easy fitting of the suction hose tightly to the machine housing.
€6.90
incl. VAT plus shipping costs
Article No. 730906
Multiple Stepped Hose Adapter
More than one adapter can be created depending on the necessary size (separate with a fine-toothed saw).
€7.10
incl. VAT plus shipping costs
Article No. 727652
Fine Dust Filter Cartridge with Cleaning Mechanism
Fine dust microfilter with a mesh or pore size of 1 micron (μm or micrometre). The numerous fins in the filter material increase the filter surface size compared to filter bags. Clogged filter pores lead to reduced extraction...
€344.00
incl. VAT plus shipping costs
Article No. 725037
Polyester Filter Bag, 5 Micron
Filter bag made of polyester fleece with a pore size of 5 microns (μm or micrometres). The filter pores filter out 99.9 % of all airborne particles ≥ 5 micron in size from the exhaust air. With hanging loop at the top end.
€67.00
incl. VAT plus shipping costs
Article No. 725040
Replacement Clamp Strap for Chip Bag
Steel band with clamping lever and adjustable clamping width. For securely fixing the chip bags to e.g. separators of extraction systems.
€11.50
incl. VAT plus shipping costs
Article No. 725045
€44.90
incl. VAT plus shipping costs
Article No. 725052
Moisture Meter with Electrode and Non-destructive Mode
Nothing is more irritating than the drying cracks or heavy warping that can occur after working on wood that is too wet. This moisture meter provides assistance with two different measuring modes: search mode provides non-destructive...
€209.00
incl. VAT plus shipping costs
Article No. 707285
Gann Electrode Moisture Meter, Measuring Range 5-20 %
The wood and plaster moisture meter functions using two measuring electrodes which are pushed into the material. The device measures the electrical resistance (and therefore the level of moisture) of the wood, wood-based material,...
€124.80
incl. VAT plus shipping costs
Article No. 707314
Wood Moisture Measuring Instrument
With this measuring instrument, you can determine the wood humidity set in a room. The two indicators show temperature and relative air humidity. The intersection of the indicators determines the anticipated wood balance humidity. This...
€109.00
incl. VAT plus shipping costs
Article No. 707133
UJK Digital Level Box
Simple and fast angle adjustment of circular saw blades, drill stands, bandsaw or grinding tables. Simply attach the magnetic underside to ferromagnetic surfaces and read off the angle. High accuracy of ±0.1°. All measurements can be...
€36.40
incl. VAT plus shipping costs
Article No. 720777
Digital Angle Gauge with Point Laser
For fast and precise measurement of angles (°) and inclinations (%). An indispensable tool on the machine tables of bandsaws and column drill presses and when tilting circular saw blades. The integrated point laser offers a great...
€39.90
incl. VAT plus shipping costs
Article No. 707769
Shaper Origin
Shaper Origin combines robotic precision with the simplicity of a hand tool to create a first-of-its-kind machine: a handheld CNC. With its intuitive interface, automatic cut correction and on-tool design, Origin brings digital...
€3,796.10
incl. VAT plus shipping costs
Article No. 721422K
Shaper Origin incl. Shaper Plate
Shaper Origin combines robotic precision with the simplicity of a hand tool to create a first-of-its-kind machine: a handheld CNC. With its intuitive interface, automatic cut correction and on-tool design, Origin brings digital...
€4,212.60
€4,093.60
incl. VAT plus shipping costs
Article No. 721426K
Shaper Origin incl. Shaper Workstation
Shaper Origin combines robotic precision with the simplicity of a hand tool to create a first-of-its-kind machine: a handheld CNC. With its intuitive interface, automatic cut correction and on-tool design, Origin brings digital...
€4,331.60
€4,212.60
incl. VAT plus shipping costs
Article No. 721425K
Shaper Origin incl. Shaper Workstation and Shaper Plate
Shaper Origin combines robotic precision with the simplicity of a hand tool to create a first-of-its-kind machine: a handheld CNC. With its intuitive interface, automatic cut correction and on-tool design, Origin brings digital...
€4,748.10
€4,569.60
incl. VAT plus shipping costs
Article No. 721427K
Shaper Plate
The Shaper Plate is universal template designed to install a wide range of hardware, inlays, round corners, route system 32 holes and so much more. Align Plate to your workpiece and let Origin do the rest. Utilise hundreds of digital...
€416.50
incl. VAT plus shipping costs
Article No. 721424K
Shaper Workstation
The efficient clamping device for Origin. Perfect for horizontal and vertical clamping of all workpieces. Align, fix and cut with repeatable accuracy. Workstation is a flexible and efficient clamping device, ideal for implementing even...
€535.50
incl. VAT plus shipping costs
Article No. 721423K
Shaper Pry Bar
This pry bar made of stainless steel is specially sharpened according to Shaper's specifications, allowing you to easily get under the workpiece without damaging its edges. It is ideal for loosening parts that are attached with...
€27.37
incl. VAT plus shipping costs
Article No. 721546K
Shaper Dovetail Router Bit
This solid carbide dovetail cutter has been specifically designed to route slots for the Keilverbinder connection system and allows you to produce invisible hardware connections which are robust yet easy to disassemble. Cutting templates...
€71.40
incl. VAT plus shipping costs
Article No. 721460K
Shaper Single Connectors
These connectors make it easy to add simple, strong connections between furniture elements. Ideal for invisible, friction-locked connections, very stable but still detachable. Ideal for both furniture and cabinetry, Keilverbinder...
€17.85
incl. VAT plus shipping costs
Article No. 721470K
ShaperTape
Origin utilises ShaperTape markers to digitally augment your Workspace and accurately track position while you are working. ShaperTape’s uniquely encoded patterns are printed using specialised production equipment designed to ensure...
€22.61
incl. VAT plus shipping costs
Article No. 721428K
Shaper Dovetail Router Bit 15°
This 15° dovetail bit can be your go-to bit for all your dovetail joinery. Two brazed carbide blades cut consistently and accurately in even the hardest woods. Its 15° incline gives you great freedom to take on a wider variety of...
€45.22
incl. VAT plus shipping costs
Article No. 721444K
Shaper Woven Dust Hose, 2.5 m
The Shaper Woven Dust Hose is light, flexible and durable, with a braided sleeve to prevent snagging and pulling. The versatile tapered connector ensures optimum suction power with a wide variety of dust collection systems. Its...
€117.81
incl. VAT plus shipping costs
Article No. 721449K
Shaper T-Slot Router Bit 10.5/5 mm, Shank Ø 8 mm
This T-slot bit adeptly handles a wide range of technical operations. From insetting cables to cutting perimeter T-slots and keyhole mounting, this brazed carbide bit stays sharp, ensuring quality cuts throughout its lifetime....
€45.22
incl. VAT plus shipping costs
Article No. 721443K
Shaper T-LOC Systainer SYS 1
This is no ordinary SYS 1 Systainer - it's a Shaper special, loaded with a customisable (cuttable!) solid foam insert to keep all your small tools and accessories at the ready, and a corrugated foam lid to ensure that everything stays in...
€83.30
incl. VAT plus shipping costs
Article No. 721433K
Shaper Up-Spiral Router Bit Ø 6 mm, Shank Ø 8 mm
This is Origin’s workhorse cutter. The ideal geometry and material for all hard and softwood as well as MDF and plywood. The solid carbide composition keeps your edge sharp even after hours of use, and the two-flute upcut geometry...
€32.13
incl. VAT plus shipping costs
Article No. 721430K
Shaper Up-Spiral Router Bit Ø 3 mm, Shank Ø 8 mm
This cutter is part of Origin's basic equipment. The cutting geometry of the solid carbide is ideal for hard and soft woods as well as wood-based materials such as MDF and plywood. Thanks to the upcut spiral flute, the chips are...
€32.13
incl. VAT plus shipping costs
Article No. 721431K
Shaper Up-Spiral O-flute Router Bit 5 x 20 mm
This roughing bit provides huge improvements to machining time, bit wear, and overall efficiency in all your profile cutting operations in deeper material. Make single passes up to 20 mm in even dense hardwood with confidence. An 8 mm...
€58.31
incl. VAT plus shipping costs
Article No. 721445K
Shaper Up-Spiral O-flute Router Bit ¼ x 1½ Inch
With a 1.5 inch (38 mm) cutter length, this carbide bit gives you the freedom to make deep cuts in acrylic glass with accuracy and . The polished o-flute prevents nasty chip build-up that can compromise cut quality and decrease cutter...
€58.31
incl. VAT plus shipping costs
Article No. 721441K
Shaper Up-Spiral Flat Router Bit ¼ x 1 Inch
The ¼ x 1 inch Up-Spiral Bit has similar qualities to those of the 6 mm bit - including a carbide composition and dual flute geometry - with the added benefit of a longer edge life. It also offers a longer overall length and a longer...
€32.13
incl. VAT plus shipping costs
Article No. 721437K
Shaper Up-Spiral O-flute Router Bit ⅛ x ½ Inch
An ideal bit for many types of acrylic cutting. The polished flute prevents nasty chip build-up that can compromise cut quality and decrease cutter longevity. Special cutter geometry for both acrylics and non-ferrous metals. Great for...
€45.22
incl. VAT plus shipping costs
Article No. 721440K
Shaper Up-Spiral O-flute Router Bit ⅛ x ¼ Inch
The ⅛ inch (3.175 mm) polished O-flute bit is a great go-to bit for making shallow cuts in a wide variety of acrylics and non-ferrous metals. The polished flute prevents nasty chip build-up that can compromise cut quality and decrease...
€38.08
incl. VAT plus shipping costs
Article No. 721438K
Shaper Up-spiral Flat Router Bit 8 x 35 mm
Three flutes provide cutting advantages in a wide range of materials, from foam to hardwood. Increased pass depth makes Origin projects more efficient without compromising on cut quality or stability. The shank has depth marks for exact...
€113.05
incl. VAT plus shipping costs
Article No. 721446K
Shaper Clearing Router Bit 16 x 16 mm
This clearing bit will change the way you work with Origin. Its 16 mm diameter will make quick, clean work of all your pocketing operations, and make Origin an efficient tool for a wide range of projects. The three-flute geometry enables...
€189.21
incl. VAT plus shipping costs
Article No. 721447K
Shaper Collet Kit
Shaper's complete collet kit includes all basic collet increments in imperial and metric measurements up to ¼ inch (6.35 mm) and 8 mm, respectively. Every project starts with the right cutter and a collet that's designed to accommodate...
€208.25
incl. VAT plus shipping costs
Article No. 721435K
Shaper Collet With Nut ⅛ Inch (3.175 mm)
The ⅛ inch (3.175 mm) collet is a must-have accessory for anyone who is planning to use Origin on fine detail and finish work. it lets you create detailed engravings, inlaid work and precision work with speciality cutters. Advantages:...
€51.17
incl. VAT plus shipping costs
Article No. 721429K