Naturit Urushi Oil, 250 ml

The surface must be clean and free from old coatings. The final sanding should be done with at least 150 grit. Shake or stir the Urushi oil well before use. Directly after application, the colour tone darkens slightly and then slowly fades after curing. This colour change is considered a purely natural drying and curing process. After a penetration time of about ten minutes, wipe off excess Urushi oil with a lint-free cloth. Preferably use at temperatures above 16 °C and humidity above 60 %. Bear in mind that at lower humidity levels, drying times will be longer. Depending on the absorbency of the surface, the consumption is 20-40 ml/m² per application. The coverage is around 35 m²/litre. Determine the exact consumption on the respective workpiece. Depending on wood moisture, ambient temperature and humidity, drying takes between six and twelve hours. The second coat is applied after at least one day. Curing takes about seven days. During application and drying, ensure good ventilation.