Sonstige

Products from Sonstige

Buy Sonstige products online at DICTUM.
Replacement Blade for Herdim Peg Shaper, Violin

Replacement Blade for Herdim Peg Shaper, Violin

Alloy tool steel, cutting edges are 61 HRC case-hardened. Thickness 1 mm.
€4.90

incl. VAT plus shipping costs

Article No. 730217

Exchangeable Rod (without Cone) Titanium, Stainless Steel Tip, 520 mm, Ø 8 mm

Exchangeable Rod (without Cone) Titanium, Stainless Steel Tip,...

Solid titanium rod with an exchangeable M6 stainless steel tip including rubber tip.
variants
€55.90

incl. VAT plus shipping costs

Article No. 434105

Wing Divider »L'Arc« with Pencil Holder, 310 mm

Wing Dividers »L'Arc«, 310 mm

Since as far back as the Middle Ages, the compass has been resplendent on the emblem of the carpenters' guild alongside the square and the plane. Since the wing compass allows secure locking of the set measurement, it is considered an...
variants
€72.50

incl. VAT plus shipping costs

Article No. 707726

Clamping Sleeve for Adaptor Flange

Clamping Sleeve for Adaptor Flange

For mounting CBN grinding wheels Ø 150 mm e.g. on Low-speed Grinder DS 150 L (No. 720782 ). By means of this sleeve, the adaptor flange for CBN grinding wheels can be conveniently clamped to the machine shaft. The clamping sleeve bridges...
€5.10

incl. VAT plus shipping costs

Article No. 707837

Voltage Tester

Voltage Tester

Small screwdriver with integrated voltage tester. For detecting alternating voltages in the low voltage range.
€2.30

incl. VAT plus shipping costs

Article No. 800330

Magnetic Tool Bar »Profi«

Magnetic Tool Bar »Profi«

Magnetic tool bar for medium to heavy tools. Galvanised steel rail with plastic body. Maximum strength 3.5 kg. Suitable for the perforated wall of the Men's Kitchen.
€39.80

incl. VAT plus shipping costs

Article No. 703067

Ball-head Vice for Hand Rest with Ø 25 mm

Ball-head Vice for Hand Rests

Every woodturner knows the problem: Once the workpiece has been unclamped from the chuck, it is almost impossible to re-clamp it so that it runs smoothly. With this clamping device, turning objects to work on do not even have to be...
variants
€135.60

incl. VAT plus shipping costs

Article No. 701200

Self-centring Faceplate

Self-centring Faceplate

The self-centering face plate with threaded connector makes it possible to save time and patience during assembly. Anyone working with standard faceplate segments must screw on and tighten up to 16 threaded screws during assembly. The...
€161.90

incl. VAT plus shipping costs

Article No. 701209

Hose Guide Spike, Not Rustproof

Hose Guide Spike

Robust hose deflector in a modern, timeless design prevents valuable plantings in your garden from being accidentally chopped off and the hose from coming into contact with sharp corners and obstacles. Thanks to the stainless,...
variants
€59.90

incl. VAT plus shipping costs

Article No. 717258

Band Jaw Tong, 300 mm

Band Jaw Tong

Blacksmith's tong with angled flat jaws. Forged from C-35 or C-45 carbon steel Black paint prevents corrosion Long legs allow for high leverage Lap-joint ensures the stable connection of both legs
variants
€21.90

incl. VAT plus shipping costs

Article No. 727810

Blacksmith’s Vice

Blacksmith’s Vice

Robust blacksmith's vice made of cast steel for heavy-duty use in metalwork or forging. The structure is designed for machining heated workpieces. The trapezoid threaded spindle and the additionally attached tension spring enable...
€649.00

incl. VAT plus shipping costs

Article No. 700154

Knife Making Belt Grinder, 230 V

Knife Making Belt Grinder, 230 V

Professional belt grinding machine for knife makers. A high-torque motor ensures smooth and optimum grinding results even at high pressure. All control and adjustment functions are easily and safely within reach. The supplied flat...
€1,479.00

incl. VAT plus shipping costs

Article No. 716052

Adaptor Flange with Precision Disc, Bore 12.7 mm, Spigot Length 24 mm

Adaptor Flange with Precision Disc, Bore 12.7 mm

The flange reduces the 32 mm standard bore of the grinding wheels to the 12.7 shaft diameter. It ensures an extremely smooth-running wheel in both axial and radial directions, and even better grinding results. Made in steel.
variants
€12.90

incl. VAT plus shipping costs

Article No. 820908

Steel Anvil with Two Horns, Northern German Style, 75 kg

Steel Anvil with Two Horns, Northern German Style

Forging anvil made of alloyed tool steel, with two horns, hardened, ground face and pritchel hole. Hardy hole serves as holder for anvil tools.
€1,222.00

incl. VAT plus shipping costs

Article No. 714215

Forging Anvil with Two Horns, Southern German Style, with Clipping Horn, 35 kg

Forging Anvil with Two Horns, Southern German Style, with...

Anvil made of high quality tool steel, with two tapering horns, hardened, ground face and pritchel hole. Hardy hole serves as holder for anvil tools. Also suitable for shoeing and for use in schools.
€1,099.00

incl. VAT plus shipping costs

Article No. 714216

Dowel Markers, Ø 6 mm

Dowel Markers

For exact marking of blind dowel holes. 10-piece set.
variants
€6.70

incl. VAT plus shipping costs

Article No. 746241

€5.10

incl. VAT plus shipping costs

Article No. 714134

Transport and Storage Case, Internal Dimensions 278 x 193 x 50 mm

Transport and Storage Case, Internal Dimensions 278 x 193 x 50 mm

Injection-moulded cases with high stability and optimum functionality for safe storage and transport. A full length plug-in hinge ensures maximum stability. Extra sturdy, adjustable feet provide a secure footing. Stacking lugs on the lid...
€22.90

incl. VAT plus shipping costs

Article No. 727820

Foam Board 278 x 193 mm

Foam Board 278 x 193 mm

For the best possible protection of the contents. Soft polypropylene foam with smooth surface. Thickness 10 mm. Fits. No. 727820 .
€2.20

incl. VAT plus shipping costs

Article No. 727821

Foam Board 147 x 225 mm

Foam Board 147 x 225 mm

For the best possible protection of the contents. Soft polypropylene foam with smooth surface. Thickness 10 mm. Fits. No. 727822 .
€1.60

incl. VAT plus shipping costs

Article No. 727823

Foam Board 147 x 150 mm

Foam Board 147 x 150 mm

For the best possible protection of the contents. Soft polypropylene foam with smooth surface. Thickness 10 mm. Fits. No. 727824 .
€1.20

incl. VAT plus shipping costs

Article No. 727825

Tailpiece, French Model, Ebony, Cello 4/4, 235 mm

Tailpiece, French Model, Ebony, Cello 4/4, 235 mm

Elegant, lightweight ebony tailpiece with four integrated adjusters. Endloop not included.
€158.00

incl. VAT plus shipping costs

Article No. 388035

Egg Crate Foam 15 mm, Suitable for Internal Case Dimensions 278 x 193 mm

Egg Crate Foam, Suitable for Internal Case Dimensions 278 x...

For the best possible protection of the contents. Soft polypropylene foam. Fits. No. 727820 .
variants
€2.40

incl. VAT plus shipping costs

Article No. 727826

Egg Crate Foam 15 mm, Suitable for Internal Case Dimensions 147 x 225 mm

Egg Crate Foam, Suitable for Internal Case Dimensions 147 x...

For the best possible protection of the contents. Soft polypropylene foam. Fits. No. 727822 .
variants
€1.50

incl. VAT plus shipping costs

Article No. 727829

Egg Crate Foam 15 mm, Suitable for Internal Case Dimensions 147 x 150 mm

Egg Crate Foam, Suitable for Internal Case Dimensions 147 x...

For the best possible protection of the contents. Soft polypropylene foam. Fits. No. 727824 .
variants
€1.20

incl. VAT plus shipping costs

Article No. 727832

Foldable Titanium Tip with M5 Thread, Cello

Foldable Titanium Tip with M5 Thread, Cello

Foldable tip for cello endpin, with M5 thread to fit into all standard cello endpins. The foldable design makes it possible to adjust the endpin tip angle to almost any floor conditions.
€85.00

incl. VAT plus shipping costs

Article No. 434107

Spray Bottle, 250 ml, Pump Atomizer

Spray Bottle, 250 ml, Pump Atomizer

Round spray bottle with a volume of 250 ml made of PET plastic, white with smooth surface, optionally with pump or trigger atomizer. The spray bottle is transport-tight due to a sealing insert; the additional protective cap or a lock on...
variants
€1.80

incl. VAT plus shipping costs

Article No. 800579

T-slot Nut for 8 mm Groove, M6

T-slot Nut for 8 mm Groove

T-slot nut with pressure ball for T-track profiles for use with the DICTUM Multifunction Table PRO (e.g. No. 728760 ). Self-made clamping and auxiliary devices can thus be mounted quickly and easily on the table construction. Fits e.g....
variants
€2.60

incl. VAT plus shipping costs

Article No. 728776

Parallel Connector for Aluminium Profile, 40 x 40 mm

Parallel Connector for Aluminium Profile, 40 x 40 mm

Parallel connector for 40 x 40 mm aluminium profiles. Suitable for connecting two or more Multifunction Tables PRO (e.g. No. 728760 ). Made of anodised aluminium. 1 pair incl. connecting screw.
€29.30

incl. VAT plus shipping costs

Article No. 728778

Cross Connector for Aluminium Profile, 40 x 40 mm

Cross Connector for Aluminium Profile, 40 x 40 mm

Cross connector for 40 x 40 mm aluminium profiles. Two cross connectors are required per joint. Fits Multifunction Tables PRO (e.g. No. 728760 ). Made of anodised aluminium. 1 piece, incl. fastening screw M6 (without slot nut).
€12.40

incl. VAT plus shipping costs

Article No. 728779

Tailpiece, French Model, Ebony, Violin 4/4, 109.5 mm, 1 Adjuster

Tailpiece French Model, Ebony, Violin, 109.5 mm

Elegant, lightweight ebony tailpiece with integrated adjusters. Endloop not included.
variants
€66.00

incl. VAT plus shipping costs

Article No. 388032

Pickguard, clear, acoustic guitar, 175 x 99 x 0.12 mm

Pickguard, clear, acoustic guitar, 175 x 99 x 0.12 mm

Transparent protective film for acoustic guitar. Self-adhesive with electrostatic charge, leaving no adhesive residue on the guitar top. Reusable.
€12.20

incl. VAT plus shipping costs

Article No. 571017

Distance Bushings Freya / Princess, 4-Piece Set

Distance Bushings Freya / Princess, 4-Piece Set

Fits ballpoint pen sets Freya und Princess.
€5.90

incl. VAT plus shipping costs

Article No. 730752

Workbench Caster Kit, 4 pieces

Workbench Caster Kit, 4 pieces

All four swivel castors have a foot lever to lift loads, e.g. a workbench, for quick and easy transport. Ideal for the workshop when the workbench needs to be moved. Maximum load capacity with four castors 200 kg. Caster diameter 60 mm....
€72.80

incl. VAT plus shipping costs

Article No. 707867

Munro Tool Sharpening Jig

Munro Tool Sharpening Jig

Practical cutter holder for easy re-sharpening of cutting wheels. Fits No. 728959 , 728962 , 728963 .
€6.40

incl. VAT plus shipping costs

Article No. 728966

€1.10

incl. VAT plus shipping costs

Article No. 730744

€1.00

incl. VAT plus shipping costs

Article No. 730747

Bisley Vice

Bisley Vice

This vice has its origin in Bisley, the English home of shooters and hunters. Thanks to its universal fields of application, it is very popular with hunters and knife makers. It can be clamped and fixed in any position in a matter of...
€382.00

incl. VAT plus shipping costs

Article No. 716381

Polishing Disc Mount, Tapered, Pair

Polishing Disc Mount, Tapered, Pair

The tapered thread makes it possible to clamp polishing discs with bore diameter 3-13 mm. For machine shafts with diameter 10 mm. Overall length 92 mm.
€10.60

incl. VAT plus shipping costs

Article No. 728798

Holding Arbors with Clamping Flanges, Pair

Holding Arbors with Clamping Flanges, Pair

One left-hand and one "right-hand holding arbor with two flange discs each. For clamping polishing and grinding discs. Arbor diameter 10 mm x 35 mm. For machine shafts with diameter 10 mm.
€9.90

incl. VAT plus shipping costs

Article No. 728800

Sanding Sleeve, Ø 50 mm

Sanding Sleeve, Ø 50 mm

Fits grinding roller for DICTUM Mini Polishing Motor (No. 728802 ). Sleeve length 50 mm.
€0.90

incl. VAT plus shipping costs

Article No. 728803

Circular Brush

Circular Brush

Pointed 3-row circular brush with plastic core. For pre- and post-polishing. For tapered polishing disc mounts.
€3.90

incl. VAT plus shipping costs

Article No. 728808

Rubber Cork Pads for Gluing Clamp Set, Violin

Rubber Cork Pads for Gluing Clamp Set

Thickness 2 mm, 12-piece set.
variants
€12.30

incl. VAT plus shipping costs

Article No. 735663

variants
€3.50

incl. VAT plus shipping costs

Article No. 735665

Ultra Hand Washing Paste, 500 ml

Ultra Hand Washing Paste, 500 ml

Creamy hand cleansing paste for heavy soiling. Economical in use and dermatologically tested. Contains skin-friendly special rubbing agents and caring substances, as well as high-quality refatting agents; it is silicone-, solvent- and...
€4.50

(Content: €9.00 / 1 litre)

incl. VAT plus shipping costs

Article No. 729015

Profi Clean Hand Washing Paste, 250 ml

Profi Clean Hand Washing Paste, 250 ml

Skin cleansing product with skin-friendly, natural rubbing agents made from walnut shell flour and effective cleansing power for heavy soiling. Solvent-free, with high-quality refatting agents.
€5.20

(Content: €20.80 / 1 litre)

incl. VAT plus shipping costs

Article No. 729016

DICTUM Guide Rail Spacer FSD15, Pair

DICTUM Guide Rail Spacer FSD15, Pair

When formatting with plunge-cut saws on perforated plates (e.g. multifunction tables), bench dogs are often used to position the workpiece and guide rail. From a certain material thickness the problem arises that short bench dogs do not...
€39.40

incl. VAT plus shipping costs

Article No. 728989

Knurled Nut for Multifunction Bench Dogs MBH20

Knurled Nut for Multifunction Bench Dogs MBH20

The 20 mm centring projection on the knurled nut allows it to be centred quickly and precisely in the holes of the plate. This ensures that the 8 mm thread is always in the middle of the hole and makes it easier to insert and screw on...
€5.20

incl. VAT plus shipping costs

Article No. 728991