Sonstige

Products from Sonstige

Buy Sonstige products online at DICTUM.
variants
€23.50

incl. VAT plus shipping costs

Article No. 730802

Push Stick

Push Stick

On circular bench saws, bandsaws or table routers, small and narrow workpieces must be guided with the push stick. Length 42 cm.
€4.10

incl. VAT plus shipping costs

Article No. 727937

Work Pad, Silicone, 480 x 300 mm

Work Pad, Silicone, 480 x 300 mm

This non-slip work pad made of robust silicone has given us the best results when sharpening with water and oil stones. The workplace in the kitchen or workshop remains dry and clean as the surrounding rim prevents the spread of excess...
€15.80

incl. VAT plus shipping costs

Article No. 703565

Cutting and Punching Pad, PP, 300 x 300 x 20 mm

Cutting and Punching Pad, PP, 300 x 300 x 20 mm

Robust and sturdy cutting and punching pad made of polypropylene, ideal as an impact-resistant base for cutting or punching leather. The surface is also gentle on the knives helping to achieve a perfect cut. Punching tools can penetrate...
€29.90

incl. VAT plus shipping costs

Article No. 745264

»Tsurigane« Wind Chime, Green

»Tsurigane« Wind Chime, Green

Surface decorated in the style of a Buddhist temple bell and covered with a soft green patina.
€9.90

incl. VAT plus shipping costs

Article No. 714825

French Spring Dividers with Pencil Holder, Shaft Length 150 mm

French Spring Dividers with Pencil Holder

Elegant French spring dividers made of gunmetal finished steel, with hardened tips, quick-acting screws.
variants
€32.50

incl. VAT plus shipping costs

Article No. 707151

Pantograph

Pantograph

The pantograph (Greek for «all-round writer«) transfers drawings, contours and profiles in the same, larger or smaller scale from the plan to the workpiece and thus saves a detour via computer or photocopier. With the help of the milled...
€37.80

incl. VAT plus shipping costs

Article No. 708095

Shaving Soap Dish with Lid

Shaving Soap Dish with Lid

Stainless steel shaving soap dish with high-gloss polished finish. The lid is not air sealed allowing the soap to dehumidify and it is also protected from dust and dirt. The easy-to-clean dish is only 85 g. Ø 90 mm. It accomodates our...
€21.30

incl. VAT plus shipping costs

Article No. 709197

Leather Roll-up Case for Folding Knives or Straight Razors

Leather Roll-up Case for Folding Knives or Straight Razors

Exclusive and space-saving, this roll-up case of fine brown calf leather provides safe and compact storage for folding knives or straight razors and is convenient for travellers to use. It is rolled and fastened with two leather straps...
€78.10

incl. VAT plus shipping costs

Article No. 709154

Step Wedges, 2-Piece Set

Step Wedges, 2-Piece Set

Metal wedges with steps on both sides to prevent the wedge from coming loose. For setting handles or subsequent diagonal wedging of axes and hatches. Length 37 mm, width 7-20 mm, thickness 5 mm.
€4.50

incl. VAT plus shipping costs

Article No. 714042

Boxwood Handle, Ball-Shaped, Ferrule Diameter 18 mm

Boxwood Handles, Ball-Shaped

Polished boxwood, solid ferrule.
variants
€4.80

incl. VAT plus shipping costs

Article No. 701601

Standard Bench Vice

Standard Bench Vice

Metal vice with double guide tracks, trapezoidal thread and extendable bench dog. Screwed to the bottom of the bench plate (installation height 60 mm), jaw drill holes for fastening wooden blocks.
€64.90

incl. VAT plus shipping costs

Article No. 705768

Leather Sheath for Pruning Shears

Leather Sheath for Pruning Shears

Saddler quality, with belt loop.
€22.90

incl. VAT plus shipping costs

Article No. 718118

Multi-Angle Vice

Multi-Angle Vice

Light aluminium vice, rotatable in all directions, for light assembly or other tasks. Ball-joint with quick locking mechanism. Table clamp max. 53 mm.
€34.60

incl. VAT plus shipping costs

Article No. 705796

Insertion Clamp, Ø 30 mm

Insertion Clamp, Ø 30 mm

This clamp allows workpieces to be fastened in the centre of the worktop or at the front of the workbench. Made in cooperation with a German clamp manufacturer. Fits Ulmia workbenches and DICTUM Workbench »Allround 1700«.
€101.60

incl. VAT plus shipping costs

Article No. 706320

End Support for Front Vice Guide Rods

End Support for Front Vice Guide Rods

With an end support that connects the two guide rods of the front vice mechanism, you can precisely adjust the parallel position of the jaw to the bench apron. If the font vice warps, you can restore parallelism with the end support. You...
€39.70

incl. VAT plus shipping costs

Article No. 740223

WoodStrapper

WoodStrapper

This tension belt makes woodsplitting safe and easy. Easy to fit via length-adjustable tensioning mechanism Split several small or individual large pieces of wood without the split pieces flying around Transport the split pieces...
€31.90

incl. VAT plus shipping costs

Article No. 714049

Parallel Marker

Parallel Marker

Ideal for marking built-in elements, joints, door casings, etc. Guide it along the reference surface and the adjustable pencil draws the marking line. Can also be used as a compass, thanks to the steel pin in the lower shaft. Plastic....
€9.60

incl. VAT plus shipping costs

Article No. 716152

Setscrew for Vice Jaw

Setscrew for Vice Jaw

A setscrew inside the vice allows counterpressure when clamping one side only and prevents the jaw from tilting.
€23.90

incl. VAT plus shipping costs

Article No. 740222

French Spring Dividers, Shaft Length 150 mm

French Spring Dividers

Elegant French spring dividers made of gunmetal finished steel, with hardened points, quick-acting screws.
variants
€23.50

incl. VAT plus shipping costs

Article No. 707150

Leather Case for Razor, Black

Leather Case for Razor, Black

High quality calf leather case with leather tongue closing. Fits all Thier Issard Razors. Ideal for travelling.
variants
€16.40

incl. VAT plus shipping costs

Article No. 709332

Alum Crystal Shaving Block

Alum Crystal Shaving Block

Shaving and disinfection block of pure alum (a type of aluminium sulphate) for small wounds caused by shaving. Haemostatic, astringent and antiseptic effect. When dissolved with water on the skin, alum disinfects and closes wounds. To do...
€18.70

(Content: €187.00 / 1 kg)

incl. VAT plus shipping costs

Article No. 709195

Wax Polish

Wax Polish

This Wax Polish protects plane soles made of steel and other flat surfaces from rust and at the same time reduces friction. Equally suited for cast iron, steel and iron. It also inhibits the tarnishing of polished copper, brass and...
€16.90

(Content: €169.00 / 1 litre)

incl. VAT plus shipping costs

Article No. 705484

Handle for Pfeil and Herdim Knives, for Blade Width 3.5 mm

Handle for Pfeil and Herdim Knives

Made of precious wood. Naturally treated, polished surfaces. Central screw for securing and adjusting the blade.
variants
€7.30

incl. VAT plus shipping costs

Article No. 700380

€7.90

incl. VAT plus shipping costs

Article No. 707146

Square Bench Dogs, 1 pair

Square Bench Dogs, 1 pair

Aluminium bench dogs with steel pressure spring for fixing at the required height. Fits DICTUM workbenches »Allround 1700« und »Deluxe 2000«.
€73.40

incl. VAT plus shipping costs

Article No. 706321

Spirit Lamp

Spirit Lamp

Glass container, 120 ccm capacity, burning time ca. 2-3 hours. Can be set upright or at an angle due to the polygonal base. 120 ccm capacity, round wick Ø 12 mm, with cap.
€19.90

incl. VAT plus shipping costs

Article No. 706008

Bench Wrench

Bench Wrench

Fits DICTUM workbenches and Lie-Nielsen vice mechanisms. Maple handle rod, red beech knobs.
€7.60

incl. VAT plus shipping costs

Article No. 706340

Case for Machete

Case for Machete

Fits No. 705666 .
€34.40

incl. VAT plus shipping costs

Article No. 702998

Replacement Blades for Scraper

Replacement Blades for Scraper

One pair, fits No. 703232 .
€7.90

incl. VAT plus shipping costs

Article No. 703233

€19.90 €17.90

incl. VAT plus shipping costs

Article No. 707991

Front Vice Guide

Front Vice Guide

Solid and robust front vice mechanism for installing in self-made workbenches. Also suitable for modifying or retrofitting existing benches. To ensure parallelism, we recommend installing an end support No. 740223 . Screw length 410 mm,...
€120.40

incl. VAT plus shipping costs

Article No. 740221

Padouk Handle, Octagonal-shaped Design, Ferrule Diameter 15 mm

Padouk Handle, Octagonal-shaped Design

Patterned after old English models. Polished surface.
variants
€8.60

incl. VAT plus shipping costs

Article No. 701616

File Handle, Screw-In, Internal Thread 7 mm

File Handles, Screw-In

For files with pointed tangs, fastening via internal threads, plastic.
variants
€7.90

incl. VAT plus shipping costs

Article No. 704955

€4.50

incl. VAT plus shipping costs

Article No. 701604

Rubber Grips

Rubber Grips

For student bows. 10-Piece Set.
€12.80

incl. VAT plus shipping costs

Article No. 250164

Thread for Tying of Hanks

Thread for Tying of Hanks

Thin, but extremely strong thread, 100 % flax, natural grey. 50 g spools
€24.30

(Content: €486.00 / 1 kg)

incl. VAT plus shipping costs

Article No. 250169

Bow-Protect, Violin, Viola

Bow-Protect

Silicone tube protects the bow stick and leather against thumb notches. Length 50 mm. 10-Piece Set.
variants
€48.90

incl. VAT plus shipping costs

Article No. 250194

Peg Pins, White, Violin, Viola

Peg Pins, White, Violin, Viola

For easy retrofitting and repairing. Sold in packs of 20.
variants
€5.30

incl. VAT plus shipping costs

Article No. 284701

Peg Pins, Black, Violin, Viola

Peg Pins, Black, Violin, Viola

For easy retrofitting and repairing. Sold in packs of 20.
variants
€5.30

incl. VAT plus shipping costs

Article No. 284703

Peg Pins, Gold, Violin, Viola

Peg Pins, Gold, Violin, Viola

For easy retrofitting and repairing. Sold in packs of 20.
variants
€5.30

incl. VAT plus shipping costs

Article No. 284705

Chinrest Barrel, Titanium, 1 Pair, Barrel 23 mm

Chinrest Barrel, Titanium, 1 Pair

Solid titanium is an excellent material for making chinrest screws. A titanium chinrest screw is approx. 60% lighter than a brass chinrest screw. The material is gentle on the skin and hypoallergenic. To rebuild a chinrest with M 3.5...
€9.90

incl. VAT plus shipping costs

Article No. 339713

Chinrest Barrel, Gold Coloured Titanium, 1 Pair, Barrel 40 mm

Chinrest Barrel, Gold Coloured Titanium, 1 Pair, Barrel 40 mm

Thread Size M 3.0. Due to their smaller thread size, titanium chinrest barrels can not be used in conjunction with conventional brass chinrest screws with M 3.5 threads.
variants
€14.90 €12.90

incl. VAT plus shipping costs

Article No. 339823