Sonstige
Products from Sonstige
Buy Sonstige products online at DICTUM.
Pen Blank, Walnut , 650 mm
Measuring 650 mm in length, these blanks can be used to manufacture ballpoint pens, fountain pens and handles for letter openers and magnifying glasses.
€6.60
incl. VAT plus shipping costs
Article No. 730485
Fretboard Straight Edge, Notched, Guitar
Steel ruler with precisely milled and sanded notched ruler edge for guitar fretboard straightness detection. Long and short scale notch pattern covers majority of fretting patterns.
€40.60
incl. VAT plus shipping costs
Article No. 707014
Camel Thorn, 150 x 20 x 20 mm
The camel thorn tree is an acacia species common to southern Africa. Due to the slow growth of the tree, the annual rings are very close to each other. The wood is very hard and robust and is therefore ideal for turned items. Density...
€4.60
incl. VAT plus shipping costs
Article No. 831755
Liquid Shellac, Superior
Liquid shellac with optimum mix ratio for instant application. Our liquid shellac consists of ultra-clean, dewaxed shellac flakes and pure ethanol (alcohol 96 %). The liquid shellac is especially recommended when working on smaller...
€14.90
(Content: €59.60 / 1 litre)
incl. VAT plus shipping costs
Article No. 810036
Pear, 300 x 60 x 60 mm
The wood of the pear tree shows an even, fine-pored wood structure and is easy to work with. Its striking reddish colour makes it popular for furniture making. Thanks to its fine structure and hardness, it is also suitable for...
€6.00
incl. VAT plus shipping costs
Article No. 832028
Plum, 300 x 40 x 40 mm
Plum wood features a striking, in some places very strong reddish to purple-brown shade and is very good to work. Its finely grained and even structure makes it ideal for knife handles as well as woodwind instruments, for carving and...
€5.10
incl. VAT plus shipping costs
Article No. 832031
Traditional English Marking Gauge
Walnut marking gauge made in England. Supplied with two scribers, one of which can be adjusted separately by a sliding fastener. Ideal for quick parallel marks (grooves, tenons). Another scriber on the opposite side of the arm is used to...
€43.80
incl. VAT plus shipping costs
Article No. 703965
Masur Birch, 2nd Quality, 120 x 40 x 30 mm
The contrast between the light-coloured heartwood and dramatic dark-coloured rays running through the wood has made masur birch wood from the polar regions highly sought after by carvers and woodturners alike. Masur birch is both highly...
€7.90
incl. VAT plus shipping costs
Article No. 831779
Elm, 300 x 40 x 40 mm
The sapwood and ripewood are pale yellow, while the heartwood is reddish to brown. Because of its attractive grain, this decorative wood is popular for interior fittings. It is one of the most beautiful wood types in Europe. Processing...
€3.00
incl. VAT plus shipping costs
Article No. 831986
Ash, 300 x 40 x 40 mm
White to olive brown, ring-porous wood with high tensile and bending strength. Ash is elastic with good mechanical characteristics. When steamed, it is easy to bend. The white wood is particularly easy to stain. It often has a...
€2.40
incl. VAT plus shipping costs
Article No. 831971
€10.60
incl. VAT plus shipping costs
Article No. 707870
Wooden Dowels, Beech
Multi-purpose solid beech dowel rod for the production of dowels, woodturning objects but also threaded rods. Finishes and polishes well. Length 500 mm.
€2.00
incl. VAT plus shipping costs
Article No. 701704
Gilding Milk, 150 ml
Special glue for gilding with metal leaf. The glue is applied with a brush. Allow to dry after applying, then place the metal leaf on top and rub down firmly. The glue is also suitable for curved and round surfaces. For indoor use.
€4.90
(Content: €32.67 / 1 litre)
incl. VAT plus shipping costs
Article No. 727636
Twist Drill »Speed«, Metal
High-quality spiral drill bits with fast feed. Made of high quality HSS Point angle of 130° Resistant, easy-to-sharpen cone-shaped grind Type N with 20-30° helix angle for hard materials Milled from solid material (ground drill) Suitable...
€0.60
incl. VAT plus shipping costs
Article No. 718600
Ebony, 2nd Quality, 300 x 30 x 30 mm
Ebony, one of the hardest, densest woods in the world, is often used in turnery, cabinet making, restoration work and musical instrument making for parts which need to either be particularly beautiful or resistant to wear, e.g. keys,...
€12.90
incl. VAT plus shipping costs
Article No. 831924
Smoothing Planes »Kanetomo Kanna«
Japanese white oak body with non-adjustable chipbreaker. Comes with one carbon steel blade.
€67.00
incl. VAT plus shipping costs
Article No. 730753
»Amakusa« Japanese Natural Sharpening Stone
Medium fine lime sandstone from the Kumamoto/Sage region with a dense structure and even grain for intermediate grinding.
€39.90
incl. VAT plus shipping costs
Article No. 711688
One-handed Edge Clamp
Practical edge clamp for easy application of edging on large workpieces and inside and outside radii. It even makes laminating using templates easy without help from others. The non-slip jaws even remain in contact with ultra-smooth...
€62.30
incl. VAT plus shipping costs
Article No. 705857
Australian Precious Wood, Square Timber, Length 120 mm, Red...
Blanks for making high-quality knife handles, turnery and decorative objects. Sealed end grain, virtually crack-free.
€19.80
incl. VAT plus shipping costs
Article No. 831330
Slick
Slick for making beam joints and for finishing work. Double-layered, well-proportioned blade with a cutting edge of White Paper Steel. Handle made of Japanese red oak.
€273.00
incl. VAT plus shipping costs
Article No. 710802
Revolving Punch Pliers
For punching leather, cardboard, rubber, plastic etc. Six punches with diameters of 2 / 2.5 / 3 / 3.5 / 4 and 4.5 mm. The diameter is displayed in the view window. Pressed, anti-skid corded steel shanks with stop. 270 g.
€15.90
incl. VAT plus shipping costs
Article No. 711995
€1.40
incl. VAT plus shipping costs
Article No. 730460
Marking Knife »Kogatana« Standard, Left bevel
These hand-forged blades made of double- or triple-layered steel are exceptionally sharp, wear-resistant and easy to resharpen. 58 HRC.
€27.90
incl. VAT plus shipping costs
Article No. 710304
Automatic Punch Set with 26 Letters and Numbers
With this set you can easily mark wood and non-hardened metal. The knurled brass handle works with spring-load, you do not need a hammer. Simply insert a letter or number bit into the hexagon socket and press down. Letters are approx. 4...
€17.20
incl. VAT plus shipping costs
Article No. 708324
Marking Knife »Kogatana« Standard, Right bevel
These hand-forged blades made of double- or triple-layered steel are exceptionally sharp, wear-resistant and easy to resharpen. 58 HRC.
€19.90
incl. VAT plus shipping costs
Article No. 710404
€7.90
incl. VAT plus shipping costs
Article No. 719818
Adjustable Wood Drill Bit
Wood drill bit for brace, seamlessly adjustable from Ø 22 mm to Ø 76 mm via two sliding cutters. Shaft suitable for three-jaw chuck. For drilling in softwood, universal for all diameters and intermediate sizes.
€34.90
incl. VAT plus shipping costs
Article No. 707181
Bone Plate, 55 x 18 x 2 mm
For making knife handle scales, inlays, jewellery and as a replacement for elephant ivory. Hard and resistant to wear, easy to sand and finish. Made from thick-walled, sterilized water buffalo bones.
€5.30
incl. VAT plus shipping costs
Article No. 831155
Wooden Case, for 3 Knives
Elegant wooden case with a well-crafted interior featuring knife slots to protect the sensitive cutting edges from damage. Lid decorated with Japanese calligraphy.
€22.50
incl. VAT plus shipping costs
Article No. 705885
Ginkgo Cutting Board
Tough but not too hard, easy on knife cutting edges, good looking and antibacterial, ginkgo is an ideal wood for cutting boards. This solid board is made of non-glued, air-dried Japanese ginkgo, with a planed and untreated surface.
€79.00
incl. VAT plus shipping costs
Article No. 706028
€9.90
incl. VAT plus shipping costs
Article No. 707255
Handiwork Metal 150
Fine saw for non-hardened metals and hard plastics. The rubber handle provides a comfortable and secure grip. Replaceable blade. Can also be used with blade for wood (No. 712716 ).
€18.50
incl. VAT plus shipping costs
Article No. 712715
Japanese Gardening Gloves
These thin, cosy gardening gloves made of finely perforated pigskin facilitate precise control of tools and plants. Inner lined with full-grain leather for better grip, Velcro fastener on cuff. Size M = 7, L = 8, XL = 9-10
€14.90
incl. VAT plus shipping costs
Article No. 707655
Australian Precious Wood, Square Timber, Length 300 mm, Red...
Blanks for making high-quality knife handles, turnery and decorative objects. Sealed end grain, virtually crack-free.
€47.90
incl. VAT plus shipping costs
Article No. 831120
Filter Paper „Miyoshinogami”, 10-Piece Set
This filter paper is used to filter expensive lacquers before use or after adding pigments, to avoid lumps and impurities in the lacquer later. To use it, you lay several sheets of paper (5-10) on top of each other and pour in the...
€5.40
incl. VAT plus shipping costs
Article No. 716313
Ebony Assortment
Heartwood ranging in colour from jet black to dark and brown striped. A typical selection contains 19 x 19 to 38 x 38 mm squares, 100-160 mm in length. Approx. 10-20 pieces total. All the pieces have waxed ends and are virtually free of...
€106.70
(Content: €23.71 / 1 kg)
incl. VAT plus shipping costs
Article No. 831020
Analogue Calliper
Bevelled scale in mm and inch for parallax-free reading. Deep-etched stainless steel, slide with 0.05 mm vernier and locking screw.
€28.80
incl. VAT plus shipping costs
Article No. 707303
€133.30
incl. VAT plus shipping costs
Article No. 719207
Telescopic Mirror
Double ball-jointed mirror with telescopic handle. Fits into any shirt pocket thanks to its compact length.
€12.90
incl. VAT plus shipping costs
Article No. 707112
Redheart 150 x 150 x 50 mm
The incomparable shades of colour with partly purple and golden brown streaks make this intensive blazing red wood, also called »Chakte Kok«, especially attractive. To retain its rich hues, the hard, fine-pored wood should be treated...
€28.20
incl. VAT plus shipping costs
Article No. 831379
Gouges, 7-Piece Set
These gouges offer all the quality advantages of Japanese sculptor's gouges at a good price-performance ratio. Double-layered blades, core made from SK 5, seamlessly integrated handles and a removable heavy-duty head ferrule, which is...
€179.00
incl. VAT plus shipping costs
Article No. 715250
»Smoothing Plane« for Hardwood
Ideal for working hardwoods. The steep angle of the blade (45° instead of 40°) reduces the danger of tear-outs when working against the grain. The cutting steel made of the highest-quality powder HSS (66 HRC, very tough) gives the...
€317.00
incl. VAT plus shipping costs
Article No. 718088
Flexible Shaft
Made in Japan by the market leader in automotive tools, this flexible shaft can be used with both normal cordless screwdrivers and cordless impact screwdrivers. 300 mm long, the flexible bit holder is ideal for inaccessible spots,...
€44.30
incl. VAT plus shipping costs
Article No. 717216
Folding Knife Samu
Robust Japanese folding knife featuring Pakka wood handle scales in Mahagoni wood look. The 440B stainless steel blade is securely fastened thanks to back lock locking mechanism. Solid stainless steel bolsters round off the handle and...
€39.90
incl. VAT plus shipping costs
Article No. 709998
Rattan Wrappings
From time immemorial, thin strips pulled from rattan cane have been used to wrap all types of handles in Asia. This natural material, which is very comfortable to hold, lends elegance to the handles of Japanese saws as well as those of...
€4.90
incl. VAT plus shipping costs
Article No. 708898
Ochi Hocho, Ajikiri (small fish and vegetable knife)
Each of these triple-layered blades, made according to a traditional design, is personally signed by the master blacksmith. The cutting edge of hard Blue Paper Steel (61 HRC) is flanked by tough steel. The black-burned surface forms an...
€84.70
incl. VAT plus shipping costs
Article No. 719250
Scraping Plane
Vertical blade with SK5 steel cutting layer. For trueing the soles of Japanese planes, working very hard woods and thin pieces. Plane across or diagonal to the grain. Japanese white oak body.
€132.00
incl. VAT plus shipping costs
Article No. 717015
Japanese Hair Cutting Scissors Damask Cirrus 5.5“
The blades of these professional scissors are forged from nickel steel and the handle is made of SUS 430 steel. The 32-layer damask nickel steel is not only beautiful to look at but also has practical advantages. The many fine layers...
€389.00
incl. VAT plus shipping costs
Article No. 708168