Sonstige

Products from Sonstige

Buy Sonstige products online at DICTUM.
Table Width Extension for Bandsaw BS 270-10

Table Extensions for Bandsaw BS 270-10

The side extension is very useful for trimming cuts, the rear extension for rip cuts. Use the steel pads to precisely fit the extension to the level of the machine table. Incl. mounting screws. Plate thickness 18 mm, made of multi-layer...
variants
€62.00

incl. VAT plus shipping costs

Article No. 707953

Clamping Mandrel 10/6 mm

Clamping Mandrel 10/6 mm

For rotary tools such as drills, straight grinders, flexible shafts etc. For 10 mm disc bores. By means of two additional flange discs with Ø 30 mm, discs with 20 mm bores can also be mounted when using reducing rings (No. 729027 ). Max....
€7.20

incl. VAT plus shipping costs

Article No. 729030

Sharpening Guide with Horizontal Clamping and Wide Clamping Surface

Sharpening Guide with Horizontal Clamping and Wide Clamping...

This high-quality cast iron sharpening guide with its large clamping surface is ideal for sharpening Japanese plane blades and very wide chisels. The long roller prevents tilting during sharpening. Light and comfortable to use, thanks to...
€94.00

incl. VAT plus shipping costs

Article No. 708434

White Aluminium Oxide Grinding Wheel, 150 x 25 x 12.7 mm, Grit 60

White Aluminium Oxide Grinding Wheels, 150 x 25 x 12.7 mm

White aluminium oxide is one of the purest abrasives. It produces fine ground surfaces with good material removal. Fits Double-wheeled Grinder DS 150 S (No. 720795 ).
variants
€12.20

incl. VAT plus shipping costs

Article No. 720800

Washi Tape »Gold Tape UV 90«, 19 mm

Washi Tapes »Gold Tape UV 90«

Very thin and wet-strength adhesive tape made of Japanese Washi paper with specially formulated acrylate adhesive designed to perfectly suit the edges. High UV resistance Substrate-specific adhesive force Suitable for all kinds of...
variants
€2.70

(Content: €0.05 / 1 metre)

incl. VAT plus shipping costs

Article No. 820274

Plastic Pipette, 10-piece Set

Plastic Pipettes

Transparent pipettes for dosing dyes, additives, etc. With graduated scale in 0.5 ml divisions. Full content 3 ml, length 16 cm. One drop corresponds to approx. 0.04 g (water).
€3.50

incl. VAT plus shipping costs

Article No. 727642

Direct Collet #2 MT, 3 mm

Direct Collet #2 MT

Direct Collet #2 MT, ground, with thread M10 x 1.5 for drawbar.
variants
€15.30

incl. VAT plus shipping costs

Article No. 727653

Reducer Rings 20/10 mm, 1 pair

Reducer Rings, Pair

For reducing the bore diameter of grinding and polishing wheels. Made of plastic.
variants
€2.00

incl. VAT plus shipping costs

Article No. 729027

Faceplate, Ø 80 mm

Faceplate, Ø 80 mm

Faceplate made of steel with one ring of timber-mounting holes. For screwing on workpieces with larger diameters. For use with a 42 mm open-end wrench.
€53.80

incl. VAT plus shipping costs

Article No. 714156

Spur Driver, #2 MT

Spur Driver, #2 MT

Standard spur driver for spindle turning.
€15.00

incl. VAT plus shipping costs

Article No. 714157

Tool Rest 150 mm

Tool Rest

Suitable for all lathes with shaft diameter 25.4 mm (1 inch). Made of grey cast iron.
€25.30

incl. VAT plus shipping costs

Article No. 714158

Live centre, #2 MT

Live centre, #2 MT

Revolving lathe tip with point angle 60°.
€29.90

incl. VAT plus shipping costs

Article No. 714159

Starter Set Standard for Cabinet Makers

Starter Set Standard for Cabinet Makers

This starter set for cabinet makers will equip you with all the tools you need for your professional training and beyond. The Dozuki Universal allows precise cuts across, along or diagonal to the grain and is indispensable for making...
€217.00

incl. VAT plus shipping costs

Article No. 718437

Replacement Blade for Sausage Slicer

Replacement Blade for Sausage Slicer

Fits the sausage slicer which comes with set No. 729465 , 729466 and 729467 .
€22.60

incl. VAT plus shipping costs

Article No. 729455

Replacement Blade for Cheese Slicer, Large

Replacement Blade for Cheese Slicer, Large

Fits the large cheese slicer which comes with set No. 729465 , 729466 and 729467 .
€22.60

incl. VAT plus shipping costs

Article No. 729464

Washi Tape »Strong Tape«, 25 mm

Washi Tapes »Strong Tape«

Very thin and wet-strength adhesive tape made of Japanese Washi paper with specially formulated acrylate adhesive designed to perfectly suit the edges. High UV resistance Substrate-specific adhesive force Suitable for all kinds of...
variants
€3.50

(Content: €0.07 / 1 metre)

incl. VAT plus shipping costs

Article No. 820277

Yoshida Hocho, Bunka (All-purpose Knife)

Yoshida Hocho, Santoku, all-purpose knife

The simplicity of the design combined with its impressive performance makes the Yoshida Hocho an ideal entry knife into traditional Japanese cutting art. Forged from SUJ-2 steel, comparable to White Paper Steel, the blade with black...
series
 
€48.90

incl. VAT plus shipping costs

Article No. 725147

Yoshida Hocho, Usuba (Vegetable Knife)

Yoshida Hocho, Usuba, vegetable knife

The simplicity of the design combined with its impressive performance makes the Yoshida Hocho an ideal entry knife into traditional Japanese cutting art. Forged from SUJ-2 steel, comparable to White Paper Steel, the blade with black...
series
 
€44.30

incl. VAT plus shipping costs

Article No. 725149

Yoshida Hocho, 2-piece Set

Yoshida Hocho, Set:

The simplicity of the design combined with its impressive performance makes the Yoshida Hocho an ideal entry knife into traditional Japanese cutting art. Forged from SUJ-2 steel, comparable to White Paper Steel, the blade with black...
series
 
€72.90

incl. VAT plus shipping costs

Article No. 725152

Yoshida Hocho, Santoku-Funayuki (All-purpose Knife)

Yoshida Hocho, Santoku, all-purpose knife

The simplicity of the design combined with its impressive performance makes the Yoshida Hocho an ideal entry knife into traditional Japanese cutting art. Forged from SUJ-2 steel, comparable to White Paper Steel, the blade with black...
series
 
€44.30

incl. VAT plus shipping costs

Article No. 725148

Yoshida Hocho, Sashimi-Yanagiba (Fish Knife), 170 mm

Yoshida Hocho, Sashimi, fish knife

The simplicity of the design combined with its impressive performance makes the Yoshida Hocho an ideal entry knife into traditional Japanese cutting art. Forged from SUJ-2 steel, comparable to White Paper Steel, the blade with black...
series
 
€44.30

incl. VAT plus shipping costs

Article No. 725150

Yoshida Hocho, Petty-Kobouchou (Small All-purpose Knife)

Yoshida Hocho, Petty, small all-purpose knife

The simplicity of the design combined with its impressive performance makes the Yoshida Hocho an ideal entry knife into traditional Japanese cutting art. Forged from SUJ-2 steel, comparable to White Paper Steel, the blade with black...
series
 
€37.90

incl. VAT plus shipping costs

Article No. 725151

French Scraper Blade, Rectangular, Thickness 0.25 mm

French Scraper Blades, Rectangular

Cold-rolled Made of spring steel
variants
€3.50

incl. VAT plus shipping costs

Article No. 703507

Bevel Gauge for Tool Edges

Bevel Gauge for Tool Edges

For checking bevel angles. Brass coated. 12 angles (15°-120°).
€4.90

incl. VAT plus shipping costs

Article No. 707261

Saku Hocho, with Wooden Sheath, Petty (Small All-purpose Knife)

Saku Hocho, with Wooden Sheath, Petty (small all-purpose knife)

These all-purpose blades are exactly right for becoming acquainted with traditional Japanese knives: The sharp cutting edge made of carbon steel is flanked by two layers of stainless steel, which makes it easier to care for. The...
series
 
€29.90

incl. VAT plus shipping costs

Article No. 719719

Saku Hocho, without Wooden Sheath, Petty (Small All-purpose Knife)

Saku Hocho, without Wooden Sheath, Petty (small all-purpose knife)

These all-purpose blades are exactly right for becoming acquainted with traditional Japanese knives: The sharp cutting edge made of carbon steel is flanked by two layers of stainless steel, which makes it easier to care for. The...
series
 
€22.90

incl. VAT plus shipping costs

Article No. 719718

Turbo Saw Rasp, Straight Handle

Turbo Saw Rasp, Straight Handle

Saw rasp with non-slip elastomer handle.
€24.40

incl. VAT plus shipping costs

Article No. 704605

Japanese Precision Wooden Nail, Extra Small, 20-Piece Set

Japanese Precision Wooden Nails

For decorative corner, T or L joints which are exposed to high mechanical loads, conical wooden nails are the first choice. After pre-drilling with an appropriate conical drill, the nails are put in with a gentle hammer stroke and a...
variants
€3.90

incl. VAT plus shipping costs

Article No. 717528

French Scraper Blade, Gooseneck, Thickness 0.40 mm

French Scraper Blades, Gooseneck

Cold-rolled Made of spring steel
variants
€5.60

incl. VAT plus shipping costs

Article No. 703516

Mini Scrapers, 3-Piece Set

Mini Scrapers, 3-Piece Set

Cold-rolled Made of spring steel
€4.20

incl. VAT plus shipping costs

Article No. 703539

Scrapers, 4-Piece Set, Thickness 0.4 mm

Scrapers, 4-Piece Set

Cold-rolled Made of spring steel 1 piece each: rectangular 150 x 50 mm, convex/concave 140 x 50 mm, ball-shaped 140 x 70 mm, gooseneck 130 x 70 mm.
variants
€18.30

incl. VAT plus shipping costs

Article No. 703517

Diamond Saw File

Diamond Saw File

Saw file with wear-resistant, diamond-coated surface, ideal for very hard, tip-hardened teeth.
€36.90

incl. VAT plus shipping costs

Article No. 712802

Tapered Drill Bit, Ø 3.5 mm

Tapered Drill Bits

For drilling holes for conical wooden nails and screws. Made of HSS, not drifting. Hexagonal shaft.
variants
€12.50

incl. VAT plus shipping costs

Article No. 717520

Mikihisa Hocho, Petty (Small All-purpose Knife), 105 mm

Mikihisa Hocho, Petty (small all-purpose knife)

Double-layered blade with cutting layer made of Takefu White Paper Steel, black forged skin and hammered surface structure. Handle made of untreated magnolia wood with black ferrule. Single bevel for right-handed use. Hardness HRC 62,...
series
 
€37.90

incl. VAT plus shipping costs

Article No. 719784

Distance Bushings Leroy, 4-Piece Set

Distance Bushings Leroy, 4-Piece Set

Fits fountain pen sets Leroy.
€6.90

incl. VAT plus shipping costs

Article No. 702300

Distance Bushings Pisa, 4-Piece Set

Distance Bushings Pisa, 4-Piece Set

Fits ballpoint pen sets Pisa No. 730495 , 731495 , 730496 and 731496 .
€5.90

incl. VAT plus shipping costs

Article No. 702299

Red Beech, Spalted, 150 x 40 x 40 mm

Red Beech, Spalted, 150 x 40 x 40 mm

Very attractive grain thanks to the vividly coloured effects caused by fungi. The reddish-brown to black markings give the wood its particular charm. Spalted beechwood is used for turned and handcrafted items. Density 720 kg/m³
variants
€3.40

incl. VAT plus shipping costs

Article No. 831980

Pen Press for Creating Pens, Standard

Pen Press for Creating Pens, Standard

A pen press is used to combine the brass sleeves with the remaining components of a pen set. The elements are loosely inserted into each other, placed in the device, and pressed together with a single lever stroke. No need for...
€78.50 €64.00

incl. VAT plus shipping costs

Article No. 707751

MAG-ic Probe Thickness Gauge

MAG-ic Probe Thickness Gauge

A device for measuring thickness, can be operated by computer (Windows or Mac). Very easy operation with very reliable results. Downloadable software for thickness map creation, range 0-15 mm. Metric or inch units. Driver download, hints...
€419.00

incl. VAT plus shipping costs

Article No. 707144

Sakai Hocho, Brown Handle, Gyuto (Fish and Meat Knife), 140 mm

Sakai Hocho, Brown Handle, Gyuto (fish and meat knife)

Easy to care for Japanese knives in Western design. The VG-10 steel cutting core is surrounded by 16 layers of rustproof Suminagashi steel. The hammered structure in the upper section of the blade is not only a visual highlight but also...
series
 
€124.00

incl. VAT plus shipping costs

Article No. 708273

Cuff Links »Labrador«

Cuff Links »Labrador«

These sterling silver (925 silver) cufflinks are crafted in great detail and will enhance any outfit. Delivered in high-quality jewellery box.
variants
€199.00

incl. VAT plus shipping costs

Article No. 818601

€19.90

incl. VAT plus shipping costs

Article No. 717696

SF Peening Machine

SF Peening Machine

The peening machine, manufactured by Schweiger Fulpmes from Tyrol, Austria, is ideal for shaping a variety of scythe blades. Thanks to the peening machine, tried-and-tested for decades and manufactured with the latest technology,...
€284.00

incl. VAT plus shipping costs

Article No. 705864

Tadafusa Nashiji Blade Blanks, 3 Layers, Gyuto

Tadafusa Nashiji Blade Blanks, 3 Layers, Gyuto

The forged skin with hammered structure gives the triple-layered blade blank an original and rustic appearance. The core cutting layer of Blue Paper Steel is sharpened and polished ready-to-use, the outer layers are made of rustproof...
variants
€89.00

incl. VAT plus shipping costs

Article No. 721062

»Profi« Dowel Cutter, Basic Device without Insert Sleeve

»Profi« Dowel Cutter, Basic Device without Insert Sleeve

With this rod cutter manufactured in Germany, you can make precise dowels and round bars in all types of wood. Simply make slightly oversized (+ 1-2 mm) square blanks and use a power drill and a suitable drill holder (e.g. No. 707749 )...
€164.00

incl. VAT plus shipping costs

Article No. 714436

Bontenunryu Hocho, Wenge, Sujihiki (Kengata), Fish and Meat Knife

Bontenunryu Hocho, Wenge, Sujihiki (fish and meat knife)

The expressive, wavy blade pattern is created by a total of 63 folded layers of steel. The core cutting layer is made of VG-10, a rustproof steel of the highest grade, which is characterised by its excellent edge life. It harmonises...
series
 
€409.00 €359.00

incl. VAT plus shipping costs

Article No. 708946

Dovetail Marking Jig

Dovetail Marking Jig

This marking jig facilitates scribing dovetail joints. One side 1:5 (outside) and 1:6 (inside) for softwood, the other side 1:8 (outside) and 1:10 (inside) for hardwood.
€7.90

incl. VAT plus shipping costs

Article No. 715433

Pen Turning Set, #2 MT

Pen Turning Set, #2 MT

Starter set for making ballpoint pens, neatly and practically stored in a plastic case. Includes the most important tools and utensils for turning writing utensils.
€107.50

incl. VAT plus shipping costs

Article No. 731573