PantoRouter

Products from PantoRouter

Buy PantoRouter products online at DICTUM.
1
Template Holder

Template Holder

Entirely made of aluminium. With three T-tracks and mm and inch scale. Fits PantoRouter.
€80.30

incl. VAT plus shipping costs

Article No. 720560

Centring Pin Ø 6/8 mm

Centring Pin

For centring the router position and the router table centre. Fits PantoRouter.
variants
€10.60

incl. VAT plus shipping costs

Article No. 720763

Centering Scale Fence for PantoRouter

Centering Scale Fence for PantoRouter

For perpendicular positioning of the workpieces on the router table. Incl. clamping screw. Fits PantoRouter.
€98.00

incl. VAT plus shipping costs

Article No. 720568

PantoRouter Dust Collection Hood with Brush Ring

PantoRouter Dust Collection Hood with Brush Ring

Enables dust-free working and extracts the shavings exactly where they are produced. Fits PantoRouter. Incl. assembly screws. Exhaust Nozzle Ø 34/40 mm.
€79.70

incl. VAT plus shipping costs

Article No. 720569

Copying Pin without ball bearing, Ø 6 mm

Copying Pin without ball bearing, Ø 6 mm

Copying pin without ball bearing. Pin diameter 6 mm. Length 90 mm. Fits PantoRouter.
€5.20

incl. VAT plus shipping costs

Article No. 720640

Copying Pin, Ø 10 mm

Copying pins for PantoRouter

Copying pins with ball bearing are used for scanning the contours of templates (with the ball bearing). The diameter of all copying pins is 6 mm. Length 90 mm. Fits PantoRouter.
variants
€14.40

incl. VAT plus shipping costs

Article No. 720643

variants
€17.70

incl. VAT plus shipping costs

Article No. 720559

Featherboard for PantoRouter, 12 mm Comb Joints

Featherboard for PantoRouter

The milling featherboard is mounted on the template holder of the PantoRouter. The template can be scanned with a Ø 10 mm copying pin. Made of 4.45 mm galvanised steel. Length 400 mm. Incl. mounting screws. Suitable for PantoRouter.
variants
€46.80

incl. VAT plus shipping costs

Article No. 720567

Dovetail Cutter, Shaft Ø 8 mm, 8°

Dovetail Cutter, Shaft Ø 8 mm, 8°

For cutting dovetail mortises and joints. Made of carbide, which gives this cutter a long service life even when used with hardwood.
€28.90

incl. VAT plus shipping costs

Article No. 720760

PantoRouter for Milling Motors Ø 43 mm

PantoRouter

The PantoRouter is a precision copy milling machine for a wide variety of wood joints. With the operating principle of a mechanical pantograph, the copy milling machine can travel in all three spatial axes. Apart from the working...
variants
€1,789.00

incl. VAT plus shipping costs

Article No. 720757

Mortise and Tenon Templates, 7-Piece Set

Mortise and Tenon Templates, 7-Piece Set

5 different lengths of tenon templates with levelling tenons on the back for exact horizontal or vertical alignment. The outer contour of these templates is bevelled to allow fine adjustment of the fit. If the ball bearing is used to...
€31.40

incl. VAT plus shipping costs

Article No. 720574

Variable/Fixed Space Templates, Dovetails, 8-Piece Set

Variable/Fixed Space Templates, Dovetails, 8-Piece Set

The templates are attached to the PantoRouter template holder at equal or different distances to obtain even or irregular dovetail spacings. The lateral spacers allow even distances to be set without measuring when the stencils are...
variants
€44.90

incl. VAT plus shipping costs

Article No. 720941

Variable/Fixed Space Templates, Comb, 8-Piece Set

Variable/Fixed Space Templates, Comb, 8-Piece Set

The templates are attached to the PantoRouter template holder at equal or different distances to obtain even or irregular dovetail spacings. The lateral spacers allow even distances to be set without measuring when the stencils are...
variants
€32.20

incl. VAT plus shipping costs

Article No. 721163

Mortise Templates, 6-Piece Set

Mortise Templates, 6-Piece Set

The milling travel can be infinitely adjusted by means of the movable stoppers. Maximum template length 400 mm. Fits PantoRouter. Includes: 2 mortise templates, each 200 mm long, 4 stoppers with scale in mm and inch.
€45.90

incl. VAT plus shipping costs

Article No. 721165

Mortise and Tenon Template, Rhombus

Mortise and Tenon Template, Rhombus

For mortise and tenon joints with a rhombus-shaped cross-section. Template size: 126 x 47 mm. Fits PantoRouter.
€21.50

incl. VAT plus shipping costs

Article No. 721168

Triple Mortise and Tenon Template

Triple Mortise and Tenon Template

Mill a double or triple tenon with only one template. Groove length 33-37 mm, groove spacing 47 mm. Fits PantoRouter.
€22.30

incl. VAT plus shipping costs

Article No. 721166

Single Dowel Templates, 4-Piece Set

Single Dowel Templates, 4-Piece Set

The dowel templates can be used to drill dowel holes with repeatable accuracy or to mill round tenons. Fits PantoRouter.
€20.60

incl. VAT plus shipping costs

Article No. 721169

Mortise and Tenon Template, Loop

Mortise and Tenon Template, Loop

For mortise and tenon joints with a loop-shaped cross-section. Template size: 137 x 52 mm. Fits PantoRouter.
€21.50

incl. VAT plus shipping costs

Article No. 721167

Mortise and Tenon Templates, Segmented, 11-Piece Set

Mortise and Tenon Templates, Segmented, 11-Piece Set

The choice of segments allows the length of the slots or grooves to be set in 0.5 inch increments. Different end pieces enable you to produce rounded or square tenons. Fits PantoRouter. Includes: 4 round end pieces, 2 square end pieces,...
€42.20

incl. VAT plus shipping costs

Article No. 721164

Auxiliary Fence for PantoRouter

Auxiliary Fence for PantoRouter

Clamped on the router table, the fence allows any angle to be set. A T-slot on the fence edge allows the insertion of additional stoppers. Incl. clamping lever. Fits PantoRouter.
€41.10

incl. VAT plus shipping costs

Article No. 720660

PantoRouter incl. MAFELL Milling Motor FM 1000

PantoRouter

The PantoRouter is a precision copy milling machine for a wide variety of wood joints. With the operating principle of a mechanical pantograph, the copy milling machine can travel in all three spatial axes. Apart from the working...
variants
€1,979.00

incl. VAT plus shipping costs

Article No. 720755

PantoRouter for Milling Motors Ø 91.8 mm

PantoRouter

The PantoRouter is a precision copy milling machine for a wide variety of wood joints. With the operating principle of a mechanical pantograph, the copy milling machine can travel in all three spatial axes. Apart from the working...
variants
€1,789.00

incl. VAT plus shipping costs

Article No. 720557

PantoRouter Starter Set incl. MAFELL Milling Motor FM 1000

PantoRouter

The PantoRouter is a precision copy milling machine for a wide variety of wood joints. With the operating principle of a mechanical pantograph, the copy milling machine can travel in all three spatial axes. Apart from the working...
variants
€2,489.00

incl. VAT plus shipping costs

Article No. 721170

1