MICROJIG
Products from MICROJIG
Buy MICROJIG products online at DICTUM.
MICROJIG FitFinder
The FitFinder automatically indicates the exact centre by scanning the thickness of the workpiece, without any measuring or calculating. Up to a thickness of 75 mm, square, rectangular, or round cross-sections can be scanned and the...
€45.30
incl. VAT plus shipping costs
Article No. 704288
MICROJIG Pushblock GRR-RIPPER 3D
The 3D pushblock enables the most precise cuts on workpieces and protects your hands in every working position. No other push stick or sliding block offers more precise workpiece control or a higher degree of safety. Safety in 3D: 1)...
€69.90
incl. VAT plus shipping costs
Article No. 718734
MICROJIG Pushboard GRR-RIP BLOCK
The well thought-out pushboard has non-slip rubber studs on the underside. The clever touch is the four lowerable hooks that serve as kickback protection and, depending on the application, can be pushed up or down to hook the workpiece....
€40.20
incl. VAT plus shipping costs
Article No. 718049
MICROJIG Pushblock GRR-RIPPER2 Go
The 3D pushblock enables the most precise cuts on workpieces and protects your hands in every working position. No other push block or sliding block offers more precise workpiece control or a higher degree of safety. Safety in 3D: 1)...
€36.90
incl. VAT plus shipping costs
Article No. 725025
Kickback Protection for MICROJIG GRR-RIPPER 3D
Grips the rear edge of the workpiece, increases the feed force, prevents the workpiece from being ejected and is adjustable to the respective workpiece thickness. Avoids tear-outs and splintering when used as »sacrificial wood«. Scope of...
€19.50
incl. VAT plus shipping costs
Article No. 718047
Thrust Piece 3 mm for MICROJIG Pushblock GRR-RIPPER 3D
Extremely narrow pressure beam that guides thin strips up to a width of max. 3 mm safely between saw blade and longitudinal fence. A non-slip rubber coating prevents the workpiece from slipping and avoids pressure points on soft wood....
€19.50
incl. VAT plus shipping costs
Article No. 718048
Spare Thrust Pieces for MICROJIG Pushblock GRR-RIPPER 3D, Set
Fits MICROJIG Pushblock GRR-RIPPER 3D (No. 718045 , 718046 ). 3 pieces, width 6, 13, 28 mm.
€41.20
incl. VAT plus shipping costs
Article No. 718050
Protective Screen for MICROJIG GRR
Fits GRR-RIPPER 3D push block and GRR RIP Block. The transparent protective shield can also be used as a parallel fence.
€19.40
incl. VAT plus shipping costs
Article No. 718493
MICROJIG Handle Bridge Kit for Pushblock GRR-RIPPER
The unique arch design gives the handle four points of contact to evenly distribute the downward pressure. Oblong holes allow you to angle the handle and thus comfortably maintain an even pressure. This promotes fatigue-free work through...
€19.60
incl. VAT plus shipping costs
Article No. 725026
MICROJIG ZEROPLAY Mitre Bars
The ZEROPLAY mitre bars enable the construction of highly precise mitre gauges and auxiliary devices. Simply insert them into the T-rail or U-rail, adjust the width, test, done! The two-part bar can be varied in width and thus adapted to...
€20.60
incl. VAT plus shipping costs
Article No. 725028
MICROJIG Zeroplay 2-step Plunge Bit, 6.35 mm Shank
Stepped router bit for drilling and routing. Diameter a = 12.7 mm, diameter b = 6.35 mm. Rounding R 1.6 mm at the transitions for tear-free and visually appealing holes and slots. Counterbored holes: Use it in the drill press and obtain...
€61.90
incl. VAT plus shipping costs
Article No. 725029
MICROJIG ZEROPLAY Mitre Bars
The ZEROPLAY mitre bars enable the construction of highly precise mitre gauges and auxiliary devices. Simply insert them into the T-rail or U-rail, adjust the width, test, done! The two-part bar can be varied in width and thus adapted to...
€48.40
incl. VAT plus shipping costs
Article No. 725027