Lie-Nielsen

Products from Lie-Nielsen

Lie-Nielsen

Lie-Nielsen Toolworks began in 1981 as an effort to make top-quality hand tools available again from a US manufacturer. Today they produce over 100 types of planes, saws, spokeshaves, chisels, rasps and more. The quality of machining and finishing results in a tool that looks as great as it works, and will be a pleasure to use for years to come.

1 2 of 2
Lie-Nielsen Carcass Saw

Lie-Nielsen Carcass Saws

Ideal saw for cutting tenon shoulders. Medium-fine teeth that cut on the push stroke for fast but precise cuts across the grain.
variants
€234.00

incl. VAT plus shipping costs

Article No. 712027

Lie-Nielsen Tenon Saw

Lie-Nielsen Tenon Saws

This backsaw with a large saw blade is perfect for deep cuts in the direction of the grain, such as cutting mortise and tenon joints. The well-balanced saw cuts efficiently on the push stroke and without jamming up to a depth of 9 cm.
variants
€334.00

incl. VAT plus shipping costs

Article No. 712026

Lie-Nielsen Smoothing Plane No. 4, Spheroidal Cast Iron

Lie-Nielsen Smoothing Planes No. 4

The standard smoothing plane is capable of taking the finest shavings even on woods with wild grain direction.
variants
 
€363.80

Article No. 703712

Lie-Nielsen Jack Plane No. 5

Lie-Nielsen Jack Plane No. 5

The increased length and weight compared to the No. 4 plane makes it ideal not only for smoothing but also for levelling surfaces.
 
€424.00

Article No. 703715

Lie-Nielsen Scrub Plane No. 40½

Lie-Nielsen Scrub Plane No. 40½

The slight radius of the blade and open throat allow this plane to rapidly remove large amounts of stock. Stress-relieved cast iron body for heavy-duty use.
 
€200.80

Article No. 703704

Lie-Nielsen Dovetail Saw, Blade Thickness 0.5 mm

Lie-Nielsen Dovetail Saws

Precise, efficient back saws that produce clean cuts. Triangular teeth that cut on the push stroke, especially for dovetail joints. The minimum setting makes it easier to saw a straight line.
variants
€234.00

incl. VAT plus shipping costs

Article No. 712025

Lie-Nielsen Mini Spokeshave, Flat Sole

Lie-Nielsen Mini Spokeshaves

Based on models by the company Preston which have not been produced for 80 years, this replica guarantees optimum results with its fine mouth openings and extra-thick blades. The winged handles made of polished bronze are comfortable to...
variants
 
€117.70

Article No. 703767

Lie-Nielsen Violinmaker’s Plane No. 101

Lie-Nielsen Violinmaker’s Plane No. 101

For detail work in musical instrument making or model making. Bevel angle 25°, blade angle 20°. Results in a normal cutting angle of 45°. Bronze plane body.
 
€117.80

Article No. 703814

Lie-Nielsen Rabbet Block Plane No. 60½ R, Nickered

Lie-Nielsen Rabbet Block Plane No. 60½ R, Nickered

This plane is ideal for cutting rabbets or trimming tenons to fit. The low blade angle of 12° also makes it an excellent choice for end grain. Fine blade adjustment mechanism, non-adjustable mouth, nickered. Bevel angle 25°. Results in a...
 
€219.90

Article No. 703792

Lie-Nielsen Shoot Board Plane No. 51

Lie-Nielsen Shoot Board Plane No. 51

This specially-designed plane for use on a shooting board is an adaptation of the Stanley No. 51, which was made until 1943. Its precisely flat and square sole makes it ideal for fine work on end grain and mitres. The blade is inserted...
 
€609.00

Article No. 703029

Lie-Nielsen Shoulder Plane No. 73

Lie-Nielsen Shoulder Planes

When they were first introduced by Preston in the late 19th century, these rabbet planes represented a major breakthrough in plane design. Record continued making these planes until a few years ago. Now, Lie-Nielsen has begun...
 
€349.60

Article No. 703756

Lie-Nielsen Smoothing Plane No. 4½, Cutting Angle 45°

Lie-Nielsen Smoothing Plane No. 4½

The ultimate smoothing plane, with a large sole, extra-thick vibration-absorbent 3.6 mm blade and high weight.
 
€396.00

Article No. 703751

Lie-Nielsen Boggs Spokeshave, Curved Sole

Lie-Nielsen Boggs Spokeshaves

Precision-made spokeshave with an extremely small mouth, created by Lie-Nielsen in cooperation with master chair-maker Brian Boggs. Ideal for round and concave surfaces from chair parts to stair newels. The bronze bodies are joined...
 
€169.00

Article No. 703773

 
€42.10

Article No. 703737

 
€42.10

Article No. 702994

 
€48.10

Article No. 703774

 
€38.20

Article No. 703729

 
€48.00

incl. VAT plus shipping costs

Article No. 703059

 
€48.10

Article No. 703791

€39.10

incl. VAT plus shipping costs

Article No. 717188

Lie Nielsen High-Angle Frog, Blade Width 60 mm, 50°

Lie Nielsen High-Angle Frogs, Blade Width 60 mm

High-angle frog for smoothing difficult wood. Thanks to these replaceable frogs, the cutting angle, which is usually restricted to 45° in bench planes, can be increased to the steeper 50 or 55° angles of the renowned English smoothing...
€89.10

Article No. 717885

Lie-Nielsen High-Angle Frog, Blade Width 50 mm, 50°

Lie-Nielsen High-Angle Frogs, Blade Width 50 mm

High-angle frog for smoothing difficult wood. Thanks to these replaceable frogs, the cutting angle, which is usually restricted to 45° in bench planes, can be increased to the steeper 50° or 55° angles of the renowned English smoothing...
variants
€89.10

Article No. 717887

Lie-Nielsen Dowel Plate, Inch

Lie-Nielsen Dowel Plate

Dowel plate made of surface ground A2 tool steel with a hardness of 60 HRC for producing perfect round bars, precision pins and chair spindles. The conical holes give your dowels sharp cutting edges and, by reducing friction, ensure that...
€163.60

Article No. 715187

Lie-Nielsen Dowel Plate, Metric

Lie-Nielsen Dowel Plate

Dowel plate made of surface ground A2 tool steel with a hardness of 60 HRC for producing perfect round bars, precision pins and chair spindles. The conical holes give your dowels sharp cutting edges and, by reducing friction, ensure that...
€164.80

Article No. 715186

Lie-Nielsen Countersink 82°

Lie-Nielsen Countersink 82°

For countersinking screws as well as countersinking and deburring holes in wood. Excellent chip removal and high surface quality. American cherry handle, brass ferrule.
€94.90

incl. VAT plus shipping costs

Article No. 920446

Lie-Nielsen Burnisher, Diameter 6.3 mm

Lie-Nielsen Burnisher, Diameter 6.3 mm

Scraper burnisher with round cross-section for normal burnishing pressure and for use on round scraper edges. The surface is finely polished for a smooth drawing movement and thus an even burr. A solid brass ferrule joins the blade to...
€94.90

incl. VAT plus shipping costs

Article No. 920483

Lie-Nielsen Bench Vice Handle, Low Profile Maple Knobs

Lie-Nielsen Bankschlüssel, flache Endstücke aus Ahorn

High-quality maple vice handle. The end caps are set off with brass bolsters and screwed into the handle rod with brass screws. The brass bolsters are cushioned with rubber O-rings.
 
€39.90 €28.90

incl. VAT plus shipping costs

Article No. 705727SV

Lie-Nielsen Honing Guide

Lie-Nielsen Honing Guide

Solid side clamping honing guide, made of stainless steel, with a bronze bearing. The different removable jaws allow for the clamping of chisels with a blade width of under 5 mm, of mortise chisels, short plane blades and skew blades....
€189.90

incl. VAT plus shipping costs

Article No. 701211

Long Jaws for Lie-Nielsen Honing Guide

Long Jaws for Lie-Nielsen Honing Guide

The long jaws fit all spokeshave blades and match the following Lie-Nielsen planes: Low-angle jack rabbet plane, bench rabbet plane, cabinet maker's scraper No. 85, shoulder plane. These jaws are reversible. The short end hones a bevel...
€55.80

Article No. 701213

Chisel Jaws for Lie-Nielsen Honing Guide

Chisel Jaws for Lie-Nielsen Honing Guide

The chisel jaws fit 3 mm (1/8 inch) and 4.5 mm (3/16 inch) Lie-Nielsen bevel edge chisels as well as 6-19 mm (1/4 to ¾ inch) standard bevel edge chisels.
€55.80

Article No. 701214

Mortise Chisel Jaws for Lie-Nielsen Honing Guide

Mortise Chisel Jaws for Lie-Nielsen Honing Guide

The mortise chisel jaws fit all Lie-Nielsen mortise chisels, as well as the 25 mm (1 inch) bevel edge chisel.
€55.80

Article No. 701215

Lie-Nielsen Honing Guide Screwdriver

Lie-Nielsen Honing Guide Screwdriver

This screwdriver is made to fit the captive screws in the removable jaws for the Lie-Nielsen Honing Guide. Stainless steel blade, American cherry handle with brass ferrule. Overall length 137 mm
€64.90

incl. VAT plus shipping costs

Article No. 701212

18° Skewed Jaws for Lie-Nielsen Honing Guide, Left

18° Skewed Jaws for Lie-Nielsen Honing Guide

The 18° skewed jaws fit Lie-Nielsen skew block plane.
variants
€55.80

Article No. 701216

30° Skewed Jaws for Lie-Nielsen Honing Guide, Left

30° Skewed Jaws for Lie-Nielsen Honing Guide

The 30° skewed jaws fit Lie-Nielsen side rabbet planes.
variants
€55.80

incl. VAT plus shipping costs

Article No. 701218

1 2 of 2