Herdim

Products from Herdim

Herdim

Herdim® is DICTUM®'s own brand for products in the field of musical instrument making.

Herdim Scroll Gouge, Sweep 7 / 5 mm

Herdim Scroll Gouges

This set covers a wide range of all sweeps and widths necessary for carving violin, viola, cello scrolls. Tapered octagonal beech handles. Sharpened to ready-to-use.
variants
 
€49.30

incl. VAT plus shipping costs

Article No. 715536

Herdim Scroll Gouge, Sweep 8 / 5 mm

Herdim Scroll Gouges

This set covers a wide range of all sweeps and widths necessary for carving violin, viola, cello scrolls. Tapered octagonal beech handles. Sharpened to ready-to-use.
variants
 
€48.70

incl. VAT plus shipping costs

Article No. 715539

Herdim Scroll Gouges, 12-Piece Set

Herdim Scroll Gouges, 12-Piece Set

This set covers a wide range of all sweeps and widths necessary for carving violin, viola, cello scrolls. Tapered octagonal beech handles. Sharpened to ready-to-use.
 
€556.00

incl. VAT plus shipping costs

Article No. 715550

Herdim System Peg Reamer with 1/4 Hexagonal Shaft, Violin

Herdim System Peg Reamers with 1/4 Hexagonal Shaft

The Herdim peghole reamers for violin and cello pegs can be used with the beautiful wooden handles in spindle shape. The drills can also be driven with a cordless power drill. In this case the cutting action is especially smooth and...
variants
€99.90

incl. VAT plus shipping costs

Article No. 730412

Herdim System Calibrated Stop Ring for Peg Reamers, Violin 4/4 Thin

Herdim System Calibrated Stop Rings for Peg Reamers

Using the calibrated stop rings on Herdim reamers enables you to trim the pegholes to a definite diameter matching precisely the final diameter of the Herdim standardized pegs. The same applies to the conical holes of endbuttons and...
variants
€3.60

incl. VAT plus shipping costs

Article No. 730430

Herdim Lateral Clamp Spindle

Herdim Lateral Clamp Spindle

The ideal device for applying lateral pressure to the rib area, e.g. for leveling and properly aligning cracked ribs. Designed to be used in conjunction with Herdim violin or cello assembly clamps. Spindle with adjustable clamping pad...
€38.00

incl. VAT plus shipping costs

Article No. 735605

Herdim Rib Corner Clamp, Violin, Viola (4 spindles)

Herdim Rib Corner Clamps

For regluing rib corners. After attaching the clamp to the rib corner area, pressure can be applied directly to both sides of the rib corner using the small perpendicular spindles.
variants
€140.00

incl. VAT plus shipping costs

Article No. 735610

Herdim Cello Assembly Clamps, 42-Piece Set

Herdim Cello Assembly Clamps, 42-Piece Set

The fiber-reinforced plastic clamping pads yield a lightweight yet nevertheless very sturdy clamp. The pads feature additional flexible polyurethane inserts to prevent marking of the wood surface and varnish coat. The spindle is...
€679.00

incl. VAT plus shipping costs

Article No. 735630

Herdim Cello Assembly Clamp for Corners, Red

Herdim Cello Assembly Clamps

The fiber-reinforced plastic clamping pads yield a low weight yet nevertheless very sturdy clamp. The pads feature additional flexible polyurethane inserts to prevent marking of the wood surface and varnish coat. The spindle is partially...
variants
€20.30

incl. VAT plus shipping costs

Article No. 735632

Herdim Hand-forged Repair Clamp, Jaw Depth 28 mm

Herdim Hand-forged Repair Clamps

These traditional clamps, designed for the repair of musical instruments, are excellently suited to the construction of models thanks to their compact size. The two larger versions have a wide grip, and are therefore also used by...
variants
€37.80

incl. VAT plus shipping costs

Article No. 735718

Herdim Hand-Forged Repair Clamps, 7-Piece Set

Herdim Hand-Forged Repair Clamps, 7-Piece Set

The set contains one each of No. 735702 , 735704 , 735707 , 735714 , 735715 , 735718 and 735719 .
€283.00

incl. VAT plus shipping costs

Article No. 735754

Herdim Lower Block Clamp, Violin, Viola

Herdim Lower Block Clamps

For gluing the ribs to the lower block without disassembling the instrument. Once inserted into the instrument, the steel pivot automatically flips into the cross position as the screw is turned. Hardwood body lined with cork.
variants
€6.70

incl. VAT plus shipping costs

Article No. 735800

Herdim Aluminium Crack Clamp, Violin, Viola, Jaw Opening 110 mm

Herdim Aluminium Crack Clamps

The Herdim aluminium crack clamps are not only extremely low weight, they also show twisting clamping jaws which are flexible and perfectly accommodate to the contours of the instrument. The risk of chipping the edges when repairing a...
variants
€43.30

incl. VAT plus shipping costs

Article No. 735830

Herdim Aluminium Crack Clamps, Violin, Viola, 4-Piece Set

Herdim Aluminium Crack Clamps

The Herdim aluminium crack clamps are not only extremely low weight, they also show twisting clamping jaws which are flexible and perfectly accommodate to the contours of the instrument. So the risk of chipping the edges when repairing a...
variants
€163.00

Article No. 735834

Herdim U-Shaped Crack Clamp, Jaw Depth 30 mm

Herdim U-Shaped Crack Clamps

The 4-screw system can be adjusted to any geometry of any crack. Even cracks which are significantly deformed can be brought back together by this versatile tool. Rubber padded plates and silicone pads (No. 820068 not included) enable...
variants
€83.30

incl. VAT plus shipping costs

Article No. 735851

Herdim Repair Clamps, 7-Piece Set

Herdim Repair Clamps, 7-Piece Set

The set contains one each of No. 735720 , 735721 , 735722 , 735723 , 735724 , 735725 und 735726 . These clamps feature all requirements for repair clamps used on fine and fragile structures: High stiffness versus low weight - especially...
€149.10

incl. VAT plus shipping costs

Article No. 735730

Herdim F-Hole Clamp, Jaw Opening 100 mm

Herdim F-Hole Clamp, Jaw Opening 100 mm

The combination of aluminum and brass greatly reduces the weight of the clamp and increases its flexibility for use in sensitive areas, such as the bouts of antique violins and violas. While a standard crack clamp made of brass with a...
€43.80

incl. VAT plus shipping costs

Article No. 735809

Herdim Crack Clamp without Rubber Jaws, Jaw Opening 180 mm

Herdim Crack Clamps

The combination of aluminum and brass greatly reduces the weight of the clamp and increases its flexibility for use in sensitive areas, such as the bouts of antique violins and violas. While a standard crack clamp made of brass with a...
variants
€44.90

incl. VAT plus shipping costs

Article No. 735812

Herdim F-Hole Clamp without Rubber Jaws, Jaw Opening 155 mm

Herdim F-Hole Clamps

The combination of aluminum and brass greatly reduces the weight of the clamp and increases its flexibility for use in sensitive areas, such as the bouts of antique violins and violas. While a standard crack clamp made of brass with a...
variants
€43.80

incl. VAT plus shipping costs

Article No. 735817

Herdim Double-Sided Crack Clamp without Rubber Jaws, Jaw Opening 280 mm

Herdim Double-Sided Crack Clamps

The combination of aluminum and brass greatly reduces the weight of the clamp and increases its flexibility for use in sensitive areas, such as the bouts of antique violins and violas. While a standard crack clamp made of brass with a...
variants
€76.90

incl. VAT plus shipping costs

Article No. 735818

Herdim Outline Templates, 2-Piece Set, Cello, Strad Gore-Booth 1710

Herdim Outline Templates, 2-Piece Set, Cello

The set contains all necessary templates for plate outline combined with ribs, scroll and f-hole.
variants
€58.40

incl. VAT plus shipping costs

Article No. 739418

Herdim Radius Gauges, Notched, Guitar, 4-Piece Set

Herdim Radius Gauges, Notched, Guitar, 4-Piece Set

The gauge tailored for quick and accurate measurement of the fretboard base radius, without necessary removal of the strings. Laser cut from 1 mm stainless steel, the set of 4 gauges can measure radii 7.25", 9.5", 10", 12", 14", 15", 16"...
€34.70

incl. VAT plus shipping costs

Article No. 717087

Herdim Radius Gauges, Guitar, 2-Piece Set

Herdim Radius Gauges, Guitar, 2-Piece Set

Traditional templates for measuring of the curvature of the fretboard. Set of two covers radii 7.25", 9.5", 10", 12", 14", 15", 16" and 20". Laser cut from 1 mm stainless steel.
€20.90

incl. VAT plus shipping costs

Article No. 717088

Herdim Understring Radius Gauges, Guitar, 8-Piece Set

Herdim Understring Radius Gauges, Guitar, 8-Piece Set

Indispensable when setting and adjusting the magnets of the pickups. The gauge, only 3 mm high at the measuring base, can be slipped under the strings without their removal. The spokes have identical radius on the top and bottom, so the...
€33.10

incl. VAT plus shipping costs

Article No. 717089

Herdim Fretboard Guards, Guitar, 3-Piece Set

Herdim Fretboard Guards, Guitar, 3-Piece Set

Supposed to be placed over fret which is being shaped, to work without worry of fretboard damage. The rubber band holds the guard in position, the rubber band being placed in the way, it does not interfere with the tools in use. Set of 3...
€9.50

incl. VAT plus shipping costs

Article No. 717098

Herdim 3-Arm Crack Clamp without Rubber Jaws, Jaw Opening 240 mm

Herdim 3-Arm Crack Clamps

The combination of aluminum and brass greatly reduces the weight of the clamp and increases its flexibility for use in sensitive areas, such as the bouts of antique violins and violas. While a standard crack clamp made of brass with a...
variants
€85.60

incl. VAT plus shipping costs

Article No. 735819

variants
€17.90

incl. VAT plus shipping costs

Article No. 715557

Herdim Scraper Blade, Stainless Steel, 0.40 mm

Herdim Scraper Blades, Stainless Steel

Thanks to the use of stainless steel, this scraper blade is permanently protected against patches of rust caused by hand perspiration. It is also three times more durable than spring steel scrapers. Hot-rolled - the entire material is...
variants
€4.10

incl. VAT plus shipping costs

Article No. 703545

Herdim Scraper Blade, Stainless Steel, 0.80 mm

Herdim Scraper Blades, Stainless Steel

Thanks to the use of stainless steel, this scraper blade is permanently protected against patches of rust caused by hand perspiration. It is also three times more durable than spring steel scrapers. Hot-rolled - the entire material is...
variants
€5.40

incl. VAT plus shipping costs

Article No. 703546

Herdim Scraper Blade, 0.40 mm

Herdim Scraper Blades

Very even metal structure for a fine burr that is achieved by a special hot rolling process with simultaneous hardening treatment. Hot-rolled - the entire material is elastic and has an even structure Made of spring steel with a small...
variants
€4.10

incl. VAT plus shipping costs

Article No. 703542

Herdim Scraper Blade, 0.80 mm

Herdim Scraper Blades

Very even metal structure for a fine burr that is achieved by a special hot rolling process with simultaneous hardening treatment. Hot-rolled - the entire material is elastic and has an even structure Made of spring steel with a small...
variants
€5.30

incl. VAT plus shipping costs

Article No. 703543

Herdim Over the Rib Repair Clamp, Jaw Depth 122 mm

Herdim Over the Rib Repair Clamps

Some repairs as soundpost patch, opened seam and crack repair must be done on the back plate over the ribs. Clamping the cleats and patches is then, due to the rib height quite a tricky task. Using these over the rib steel clamps is an...
variants
€41.60

Article No. 735731

Herdim Neck Drilling Jig

Herdim Neck Drilling Jig

A peghole bore either in a new violin or in one after bushing must be perfectly perpendicular to the longitudinal axis of the instrument. The drilling jig adopts both an instrument or single neck and ensures a perfect perpendicular...
€70.30

incl. VAT plus shipping costs

Article No. 703934

Herdim Basis Varnish, 100 g

Herdim Basis Varnish, 100 g

Provides to the varnish composition necessary flexibility and safe bond between lacquer layer and wood.
€35.40

(Content: €354.00 / 1 kg)

incl. VAT plus shipping costs

Article No. 450075

Herdim Primer Varnish, 100 g

Herdim Primer Varnish, 100 g

Gives the varnish composition the necessary visual depth and refracting effects.
€34.90

(Content: €349.00 / 1 kg)

incl. VAT plus shipping costs

Article No. 450076

Herdim Coating Varnish, 100 g

Herdim Coating Varnish, 100 g

Can be easily polished to a high gloss. The coating varnish is the hardest component of the system.
€20.50

(Content: €205.00 / 1 kg)

incl. VAT plus shipping costs

Article No. 450078

Herdim Retouching Varnish, 30 g

Herdim Retouching Varnish, 30 g

It has a lower fluidity and volume loss during drying, therefore excellently retouches especially cracks in spruce. The lower hardness enables clean sanding and invisible finishing of the retouching.
€15.20

(Content: €506.67 / 1 kg)

incl. VAT plus shipping costs

Article No. 450079

Herdim Contour Line Arching Templates, Set, Violin, Guarneri Kreisler 1733

Herdim Contour Line Arching Templates

Contour line back and top arching templates derived digitally from respected instrument patterns. The contour lines start from the 5 mm line, leaving the edgework around the outline on the intent and imagination of the maker. The...
variants
€32.50

incl. VAT plus shipping costs

Article No. 739440

Herdim Arching Templates, 4-Piece Set, Back, Violin, Guarneri Kreisler 1733

Herdim Arching Templates, 4-Piece Sets

Set of three transversal arching and one longitudinal enable to replicate precisely the top or back arching of these instrument patterns. The templates replicate the positive part of the arching, leaving the edgework around the outline...
variants
€12.30

incl. VAT plus shipping costs

Article No. 739450

Herdim Tone Hole Reamers HSS, 11 x 12,25 mm

Herdim Tone Hole Reamers, spiral toothed

Cleanly cut tone holes improve both the tonal clarity and appearance of flutes, clarinets and oboes. The spiral cutting edges of the Herdim drills allow perfectly round holes with finely finished surfaces to be cut, even in wood with...
variants
€59.90

incl. VAT plus shipping costs

Article No. 730410

variants
€74.00

incl. VAT plus shipping costs

Article No. 730531

variants
€84.00

incl. VAT plus shipping costs

Article No. 730532

variants
€114.00

incl. VAT plus shipping costs

Article No. 730621

variants
€83.40

incl. VAT plus shipping costs

Article No. 730512

variants
€83.30

incl. VAT plus shipping costs

Article No. 730513

Herdim Taper Pin (without Cutting Edges), Violin, Taper 1/30

Herdim Taper Pin (without Cutting Edges)

For setting ring-shaped peghole bushings and for smoothing the sur-faces of the holes. Made of tool steel, precision-ground conical pin, without cutting edges.
variants
€64.10

incl. VAT plus shipping costs

Article No. 730521