Damasteel

Products from Damasteel

Damasteel

At the beginning of the nineties the company Erasteels formed a powder metallurgy steel division in Sweden which was later called Damasteel AB. Powder metallurgy technology had already been in use for over twenty years at this point. But even though the steel quality was greatly improved compared to standard production methods and alloys became possible that could not be produced before, it took time to become widely accepted on the market. Using the same technology the company began producing stainless Damascus steel and patented this new process. Soon several large knife manufacturers and smithies saw the potential of the new material which is now also available for end users in a multitude of patterns and sizes.

1
Damasteel DS93X Rose Damascus Steel, 26 x 3.2 x 180 mm

Damasteel DS93X Rose Damascus Steel

DS93X is a powder metallurgy Damascus steel. It is made from two different hardenable steel grades (RWL34 and PMC27). The two alloys are fused on smelting in more than 100 layers with no transition band and can therefore be regarded as a...
variants
€116.40

incl. VAT plus shipping costs

Article No. 831800

Damasteel DS93X Odins Eye Damascus Steel, 26 x 3.2 x 180 mm

Damasteel DS93X Odins Eye Damascus Steel

DS93X is a powder metallurgy Damascus steel. It is made from two different hardenable steel grades (RWL34 and PMC27). The two alloys are fused on smelting in more than 100 layers with no transition band and can therefore be regarded as a...
variants
€111.40

incl. VAT plus shipping costs

Article No. 831804

Damasteel DS93X Ladder Damascus Steel, 26 x 3.2 x 180 mm

Damasteel DS93X Ladder Damascus Steel

DS93X is a powder metallurgy Damascus steel. It is made from two different hardenable steel grades (RWL34 and PMC27). The two alloys are fused on smelting in more than 100 layers with no transition band and can therefore be regarded as a...
variants
€116.40

incl. VAT plus shipping costs

Article No. 831812

Damasteel DS93X Dense Twist Damascus Steel, 26 x 3.2 x 180 mm

Damasteel DS93X Dense Twist Damascus Steel

DS93X is a powder metallurgy Damascus steel. It is made from two different hardenable steel grades (RWL34 and PMC27). The two alloys are fused on smelting in more than 100 layers with no transition band and can therefore be regarded as a...
variants
€112.30

incl. VAT plus shipping costs

Article No. 831816

Damasteel DS93X Björkmans Twist Damascus Steel, 26 x 3.2 x 180 mm

Damasteel DS93X Björkmans Twist Damascus Steel

DS93X is a powder metallurgy Damascus steel. It is made from two different hardenable steel grades (RWL34 and PMC27). The two alloys are fused on smelting in more than 100 layers with no transition band and can therefore be regarded as a...
variants
€121.30

incl. VAT plus shipping costs

Article No. 831820

Damasteel DS93X Vinland Damascus Steel, 26 x 3.2 x 180 mm

Damasteel DS93X Vinland Damascus Steel

DS93X is a powder metallurgy Damascus steel. It is made from two different hardenable steel grades (RWL34 and PMC27). The two alloys are fused on smelting in more than 100 layers with no transition band and can therefore be regarded as a...
variants
€112.10

incl. VAT plus shipping costs

Article No. 831824

Damasteel DS93X Grosserosen Damascus Steel, 26 x 3.2 x 180 mm

Damasteel DS93X Grosserosen Damascus Steel

DS93X is a powder metallurgy Damascus steel. It is made from two different hardenable steel grades (RWL34 and PMC27). The two alloys are fused on smelting in more than 100 layers with no transition band and can therefore be regarded as a...
variants
€115.80

incl. VAT plus shipping costs

Article No. 831828

Damasteel DS93X Munin Damascus Steel, 51 x 3.2 x 250 mm

Damasteel DS93X Munin Damascus Steel

DS93X is a powder metallurgy Damascus steel. It is made from two different hardenable steel grades (RWL34 and PMC27). The two alloys are fused on smelting in more than 100 layers with no transition band and can therefore be regarded as a...
€249.00 €214.00

incl. VAT plus shipping costs

Article No. 831839

Damasteel DS93X Odin Heim Damascus Steel, 26 x 3.2 x 180 mm

Damasteel DS93X Odin Heim Damascus Steel

DS93X is a powder metallurgy Damascus steel. It is made from two different hardenable steel grades (RWL34 and PMC27). The two alloys are fused on smelting in more than 100 layers with no transition band and can therefore be regarded as a...
variants
€128.50

incl. VAT plus shipping costs

Article No. 831844

Damasteel DS93X Gysinge Damascus Steel, 32 x 4 x 210 mm

Damasteel DS93X Gysinge Damascus Steel

DS93X is a powder metallurgy Damascus steel. It is made from two different hardenable steel grades (RWL34 and PMC27). The two alloys are fused on smelting in more than 100 layers with no transition band and can therefore be regarded as a...
€195.80

incl. VAT plus shipping costs

Article No. 831850

Damasteel DS93X Thor Damascus Steel, 32 x 4 x 210 mm

Damasteel DS93X Thor Damascus Steel

DS93X is a powder metallurgy Damascus steel. It is made from two different hardenable steel grades (RWL34 and PMC27). The two alloys are fused on smelting in more than 100 layers with no transition band and can therefore be regarded as a...
€210.00

incl. VAT plus shipping costs

Article No. 831854

Damasteel DS93X Draupner Damascus Steel, 32 x 4 x 210 mm

Damasteel DS93X Draupner Damascus Steel

DS93X is a powder metallurgy Damascus steel. It is made from two different hardenable steel grades (RWL34 and PMC27). The two alloys are fused on smelting in more than 100 layers with no transition band and can therefore be regarded as a...
variants
€168.90 €144.00

incl. VAT plus shipping costs

Article No. 831858

Damasteel DS93X Bifrost Damascus Steel, 32 x 2.5 x 210 mm

Damasteel DS93X Bifrost Damascus Steel

DS93X is a powder metallurgy Damascus steel. It is made from two different hardenable steel grades (RWL34 and PMC27). The two alloys are fused on smelting in more than 100 layers with no transition band and can therefore be regarded as a...
variants
€117.60

incl. VAT plus shipping costs

Article No. 831861

Damasteel RWL34 Steel, 38 x 2.6 x 245 mm

Damasteel RWL34 Steel

RWL34 is a powder metallurgical steel based on ATS34 steel. ATS34 was originally developed for ball bearings by Kobe Steel in Japan. The internationally renowned knife maker Robert W. Loveless was the first to use this Japanese steel...
variants
€27.80

incl. VAT plus shipping costs

Article No. 831864

1