SPECIAL OFFER: DICTUM Lathe S 175 incl. DICTUM Chuck DSF100 | Lathe equipment and maintenance

Preview: SPECIAL OFFER: DICTUM Lathe S 175 incl. DICTUM Chuck DSF100

This table lathe impresses with its robust cast iron construction and interesting additional...

Close menu

Available accessories: Depth setting gauge No. 707789; shelf for lathe switch unit No. 707788; bed extension No. 707784; base frame No. 707786; base frame for bed extension No. 707787 for working height/axis centre 1120 mm.

This table lathe impresses with its robust cast iron construction and interesting additional functions. The frequency converter for the electronic speed regulation is optimally protected against damage by a sheet steel housing. A triple pulley provides maximum torque at any speed. LED speed display in rpm. The highlight: the tailstock quill is equipped with a thread and a clamping nut to clamp drills without additional drill chucks with a #2 MT direct collet chuck (No. 727653-59 /727696). This does not unnecessarily reduce the centre distance. Optionally, a depth setting gauge (No. 707789) with mm scale and depth limiter can be mounted. The control box with on/off switch, speed controller and reversing switch (left/right rotation) can be attached anywhere on the machine by its magnetic base. Two openings on the cast bed allow the installation of an optional, height-adjustable shelf (No. 707788) in which the control box can be quickly, easily and accessibly placed.

Specifications:

Spindle indexing 24 x 15°
Height of centre over bed 175 mm
Distance between centres 350-400 mm
Speed ranges 80-800, 170-1700, 350-3700 rpm
Hollow spindle Ø 20 mm (#2 MT inner cone) with M33 x 3.5 DIN 800 thread and two bearings
Hollow tailstock (10 mm bore) with #2 MT quill (95 mm travel)
Motor 0.75 kW (1 hp)
Motor rating 230 V
Length 895 mm
Width 365 mm
Height 415 mm
Weight 47 kg

Basic configuration:

Tool rest 150 mm
Tailstock quill with thread and clamping nut
Tailstock with mounting base for depth setting gauge (No. 707789)
#2 MT four-tooth spur driver Ø 25 mm
80 mm face plate
#2 MT revolving centre
Knockout rod
Screw holes on the cast iron feet for mounting on bench plates or underframe
Assembly openings for height-adjustable shelf (No. 707788)
Comes with German and English instructions

The DICTUM turning lathe is a combination of a tried-and-tested construction with technical innovations and improvements. We develop and test lathes in cooperation with our trainers and professional wood turners. During the design process, customer requirements and needs from beginners to experts are taken into account.

DICTUM Chuck DSF100

Self-centring four-jaw universal chuck for spindle and faceplate work To make the chuck even more versatile, a 24-step indexing disc is already integrated on the back. Additional indexing devices are unnecessary. The chuck key with a T-handle allows for the chuck to be easily clamped and spread with one hand, leaving the other hand free for the workpiece. The base jaws are secured against excessive unscrewing. Clamping the jaws in a clockwise direction provides additional safety. The direct thread M33 x 3.5 DIN 800 is integrated into the chuck body, making the chuck lighter and shorter while providing higher concentric accuracy. In addition, vibrations are minimised and the load on the spindle bearings is reduced. The chuck and the matching DICTUM jaws are nickel-plated, offering excellent protection against moisture and corrosion. Stainless steel screws also prevent the screws from seizing due to rust.

Benefits:

T-handle hex key for secure positioning
Chuck body and jaws nickel-plated for maximum corrosion resistance
Base jaws are secured against unscrewing
Closure of the jaws in the usual clockwise direction
Direct thread for high concentricity
Integrated 24-step indexing disc

less

Further details on the manufacturer

Close menu

DICTUM

DICTUM is dedicated to creating products which have a long service life and are free from substances that are harmful to the environment or health.

For more than 170 years, our corporate philosophy has embodied:

The highest functional aesthetics
A commitment to ergonomics
The best materials
Long-standing business relationships with manufacturers and suppliers
Long-lasting products thanks to comprehensive services such as our

Sharpening service
Handle mounting service
Spare parts availability

We attach great importance to the honest and professional working relationships we have with our partners and manufacturers. DICTUM is more than tools...

Article no.

708909

Brand

DICTUM

Set consists of the following articles:

Ready to ship, delivery time 3-4 workdays within Germany

Price advantage

€1,069.00 per set

Prices incl. VAT

plus shipping costs

Many other models

Close menu

	Type		Price		Quantity
	Price advantage SPECIAL OFFER: DICTUM Lathe S 175 incl. DICTUM Chuck DSF100 Article number 708909		€1,069.00

Plenty of accessories and spare parts

Close menu

Accessories

Silbergleit Dry Slip-additive, 250 ml

Anti-rust and non-stick coating with long-lasting effect thanks to its exceptional abrasion resistance. Easy application, e.g. with a cloth. Does not contain graphite or silicone. Areas of application As slip-additive: Invisible and...

€10.80

(Content: €43.20 / 1 litre)

incl. VAT plus shipping costs

Article No. 706178