HAGER Lathe HDE300, Set
Including infinitely adjustable outboard attachment (maximum turning diameter 1100 mm) with height-adjustable supports extending to the floor, face plate Ø 250 mm with clamp ring for chase guard.
The universal lathe for large and heavy workpieces. The underframe made of thick-walled steel provides additional torsional resistance and maximum stability, even for large workpieces. The spindle has an extra-long bearing distance from the lathe bed and is additionally set off towards the front for ergonomic turning. The cavities in the machine base as well as a case in the lower frame are filled with quartz sand, for additional weight and stability. An infinitely adjustable, electronic speed controller with digital speed display ensures maximum torque at every speed. Optional gentle ramp up/down. A brake resistor guarantees short deceleration times. A safety switch at the belt door prevents the machine being started unintentionally during a belt change. The rotating headstock also allows turning of large bowls while standing directly in front of the workpiece. The tool rest and tailstock are tightened using a keyless eccentric clamp. Exact spindle alignment, high repeat accuracy.Technical specifications:
- Height of centre over bed 300 mm
- Distance between centres 1000 mm
- Speed ranges 100-450 / 300-1100 / 750-2700 rpm
- Digital speed display
- Hollow spindle Ø 20 mm (#3 MT inner cone) with M33 x 3.5 DIN 800 thread and 4 bearings without backlash, incl. chase guard
- Tailstock with #3 MT quill (150 mm travel) and measurement scale
- Face-milled lathe bed
- Underframe filled with quartz sand for additional damping of vibration
- Three-phase motor 400 V / 2.2 kW (3 hp)
- Power plug either 230 V or 400 V
- Working height/axis centre 1110 mm
- Length 1815 mm
- Width 660 mm
- Height 1225 mm
- Weight 276 / 302 kg
- Tool rest 300 mm with 30 mm pin diameter
- Eccentric clamp for tool rest and tailstock
- #3 MT four-tooth spur driver Ø 24 mm
- #3 MT revolving centre
- Movable magnetic switch unit with toggle switch (anti-clockwise/clockwise rotation), potentiometer and emergency off
- Knockout rod
- Comes with German operating instructions
HAGER
With over 40 years of experience in the production of woodturning lathes, the German company HAGER has become one of the leading manufacturers. HAGER offers tailored special solutions in the field of woodturning, and stands for high-quality, functionally well thought-out products. The turning lathes are produced in accordance with DIN standards, and the long-term supply of spare parts and accessories is guaranteed. All accessories are compatible with all models.
- Engine power 2,2 KW (3 PS)
- Drehzahl 100-450 / 300-1100 / 750-2700 U/min
- Drehzahlregelung dreifache Riemenscheibe/elektronische Drehzahlregulierung
- Drehzahlanzeige digital
- Netzanschluss wahlweise 230 V oder 400 V
- Morse taper MK3
- Overall length 1815 mm
- Aufbauhöhe 1225 mm
- Spitzenhöhe 300 mm
- Distance between centres 1000 mm
- Version Set
- Hohlspindel Ø 20 mm (Innenkonus MK3)
- Gewinde M33 x 3,5 DIN 800
- Reitstock MK3-Pinole
- Reitstockhub 150 mm
- Werkzeugauflage 300 mm
- Weight 302 kg
| Article no. | 707715 |
| Brand | Hager |
Accessories
Silbergleit Dry Slip-additive, 250 ml
Anti-rust and non-stick coating with long-lasting effect thanks to its exceptional abrasion resistance. Easy application, e.g. with a cloth. Does not contain graphite or silicone. Areas of application As slip-additive: Invisible and...
€10.80
(Content: €43.20 / 1 litre)
incl. VAT plus shipping costs
Article No. 706178
Locking Ring ASR
Once mounted on the groove of the spindle and the groove of the clamping attachment, this locking ring prevents the clamping attachments (e.g. chuck, faceplate, etc.) from coming off or braking the lathe during operation. However, the...
€41.70
incl. VAT plus shipping costs
Article No. 720741
Taper Wiper, #3 MT
The felt-covered cone wipers made of native woods help you efficiently remove dirt from tool holders while avoiding damage. When machining wood-based materials, material residues remain in the air, which are pressed against and adhere to...
€9.80
incl. VAT plus shipping costs
Article No. 704264
Axminster Woodturning ASR Locking Ring
The locking ring adds another level of safety when turning on the lathe. When the lathe runs in reverse or stops, the precision engineered tool prevents threaded fittings such as chucks or faceplates from becoming loose. Both spindle and...
€41.00
incl. VAT plus shipping costs
Article No. 745291
Drechseln, Maschinen-Werkzeuge-Techniken
This book may well be the most renowned introduction to the fascinating art of woodturning in the world. Whether spindle, end grain or faceplate turning or threading, it describes all the basic techniques in detailed step-by-step...
€42.00
incl. VAT plus shipping costs
Article No. 713672