HAGER Lathe HDE300

The universal lathe for large and heavy workpieces. The underframe made of thick-walled steel provides additional torsional resistance and maximum stability, even for large workpieces. The spindle has an extra-long bearing distance from the lathe bed and is additionally set off towards the front for ergonomic turning. The cavities in the machine base as well as a case in the lower frame are filled with quartz sand, for additional weight and stability. An infinitely adjustable, electronic speed controller with digital speed display ensures maximum torque at every speed. Optional gentle ramp up/down. A brake resistor guarantees short deceleration times. A safety switch at the belt door prevents the machine being started unintentionally during a belt change. The rotating headstock also allows turning of large bowls while standing directly in front of the workpiece. The tool rest and tailstock are tightened using a keyless eccentric clamp. Exact spindle alignment, high repeat accuracy.Technical specifications:

• Height of centre over bed 300 mm
• Distance between centres 1000 mm
• Speed ranges 100-450 / 300-1100 / 750-2700 rpm
• Digital speed display
• Hollow spindle Ø 20 mm (#3 MT inner cone) with M33 x 3.5 DIN 800 thread and 4 bearings without backlash, incl. chase guard
• Tailstock with #3 MT quill (150 mm travel) and measurement scale
• Face-milled lathe bed
• Underframe filled with quartz sand for additional damping of vibration
• Three-phase motor 400 V / 2.2 kW (3 hp)
• Power plug either 230 V or 400 V
• Working height/axis centre 1110 mm
• Length 1815 mm
• Width 660 mm
• Height 1225 mm
• Weight 276 / 302 kg

Basic configuration:

• Tool rest 300 mm with 30 mm pin diameter
• Eccentric clamp for tool rest and tailstock
• #3 MT four-tooth spur driver Ø 24 mm
• #3 MT revolving centre
• Movable magnetic switch unit with toggle switch (anti-clockwise/clockwise rotation), potentiometer and emergency off
• Knockout rod
• Comes with German operating instructions