HAGER Lathe HDE250

Professional lathes for large workpieces. The underframe of thick-walled steel ensures additional torsion resistance and highest stability, even when turning large workpieces. The cavities in the machine base as well as a case in the lower frame are filled with quartz sand for additional weight and stability. Continuously adjustable electronic speed control with digital speed display guarantees maximum torque at any speed. Optional gentle ramp up/down. A brake resistor guarantees short deceleration times. The safety switch at the belt door prevents unintended starting during belt change. The pivotable spindle stock allows you to turn large bowls while standing directly in front of the workpiece. The tool rest and tailstock are easily secured using a keyless eccentric clamp. Exact spindle alignment, high repeat accuracy.Specifications:

• Height of centre over bed 250 mm
• Distance between centres 1000 mm
• Speed ranges 150-450 / 400-1200 / 950-2900 rpm
• Hollow spindle Ø 20 mm (#3 MT inner cone) with M33 x 3.5 DIN 800 thread and four bearings, including chase guard
• Tailstock with #3 MT quill (150 mm travel) and measuring scale
• Face-milled lathe bed
• Underframe filled with quartz sand for additional damping of vibration
• Three-phase motor 400 V / 1.5 kW (2 hp)
• Power plug either 230 V or 400 V
• Working height/axis centre 1115 mm
• Length 1750 mm
• Width 600 mm
• Height 1230
• Weight 233 / 256 kg

Basic configuration:

• Tool rest 300 mm with 30 mm pin diameter
• Tool rest and tailstock with eccentric clamp
• #3 MT four-tooth spur driver Ø 24 mm
• #3 MT revolving centre
• Movable magnetic switch unit with toggle switch (anti-clockwise/clockwise rotation), potentiometer and emergency off
• Knockout rod
• Comes with German instructions