Axminster Lathe Professional AP350WL
High-grade benchtop lathe
This small lathe with complete cast iron construction offers electronic variable speed with inverter technology, enabling fine tuning of speed to suit larger diameters or out-of-balance workpieces. A three-step poly-V pulley system allows three speed ranges which ensure maximum torque at all speeds. With versatile magnetic switch unit with on/off buttons, a speed control knob and a forward and reverse switch. An LED digital read-out of the lathe speed in rpm, spindle indexing 24 x 15°. The machines come with an adapter so you can use the UK plugs in Europe.Specifications:
- Height of centre over bed 175 mm
- Distance between centres 380 mm
- Speed ranges 0-800, 200-1750, 400-3600 rpm
- Hollow spindle Ø 20 mm (#2 MT inner cone) with M33 x 3.5 DIN 800 thread and two bearings
- Hollow tailstock (10 mm bore) with #2 MT quill (50 mm travel)
- Motor 0.75 kW (1 hp)
- Motor rating 230 V
- Length 865 mm
- Width 330 mm
- Height 415 mm
- Weight 41 kg
- Tool rest 150 mm and tailstock with eccentric clamp
- #2 MT four-tooth spur driver Ø 25 mm
- 75 mm faceplate
- #2 MT revolving centre
- Knockout rod
- Threaded holes at each corner of the lathe for bench mounting
- Comes with German and English instructions
Axminster Professional Series
The Professional series offers machines in the medium price range with high performance and robust design. Suitable for workshops of ambitious hobbyists and professionals alike with approx. 1000 hours of use per year. The good workmanship, precision and stability of the machines are also appreciated by many professionals.
All machine parts are also available as spare parts.
All machine parts are also available as spare parts.
- Engine power 0.75 kW (1 hp)
- Speed 0-800, 200-1750, 400-3600 rpm
- Speed control triple belt pulley / electronic speed control
- Speed display LED
- Reversing switch Forward/reverse switch
- Mains connection 230 V
- Morse taper #2 MT
- Overall length 865 mm
- Height 415 mm
- Spindle indexing 24 x 15°
- Centre height 175 mm
- Distance between centres 380 mm
- Hollow spindle Ø 20 mm (#2 MT inner cone)
- Thread M33 x 3.5 DIN 800
- Tailstock 10 mm bore and #2 MT quill
- Tailstock stroke 50 mm
- Tool support 150 mm
- Weight 41 kg
| Article no. | 730864 |
| Brand | Axminster |
Accessories
Tool Rest 350 mm
Suitable for all lathes with shaft diameter 25.4 mm (1 inch). Made of grey cast iron.
€48.20
incl. VAT plus shipping costs
Article No. 707785
Tool Rest 150 mm
Suitable for all lathes with shaft diameter 25.4 mm (1 inch). Made of grey cast iron.
€25.30
incl. VAT plus shipping costs
Article No. 714158
Taper Wiper, #2 MT
The felt-covered cone wipers made of native woods help you efficiently remove dirt from tool holders while avoiding damage. When machining wood-based materials, material residues remain in the air, which are pressed against and adhere to...
€9.00
incl. VAT plus shipping costs
Article No. 704263
Steady for lathe, Ø 10-109 mm
When turning long and thin workpieces, the steady rest supports and centres them. Bending and vibrating/fluttering of the workpieces is thus reduced. Three ball bearing rollers with 41 mm diameter can be individually adapted to turned...
€275.90
incl. VAT plus shipping costs
Article No. 730851
€119.00
€99.00
incl. VAT plus shipping costs
Article No. 706527
Magnetic Base Light, Halogen
An indispensable workshop accessory that is particularly helpful in delicate woodturnery. With the long flexible arm and the 180° swivel head, you can optimally illuminate thin-walled objects and green woodwork. The magnetic base can be...
€115.70
incl. VAT plus shipping costs
Article No. 705118
Drechseln, Maschinen-Werkzeuge-Techniken
This book may well be the most renowned introduction to the fascinating art of woodturning in the world. Whether spindle, end grain or faceplate turning or threading, it describes all the basic techniques in detailed step-by-step...
€42.00
incl. VAT plus shipping costs
Article No. 713672