Veritas Sharpening System II with Narrow Blade Honing Guide
The self-centring double jaw honing device allows for the quick and easy sharpening of even the narrowest of chisels, mortise chisels or plane blades. The high-precision guide permits precise and consistent perpendicular sharpening, especially for narrow blades with straight edges. Also suitable for short Japanese blades. The adjustable brass roller allows for increasing the angle of inclination by up to 2° when creating a micro bevel without unclamping the tool. Made of die-cast aluminium, easy-gliding brass roller. Includes setting gauge with fence and instruction manual.
Bevel angle 15°-40°, counter chamfer 10°-20°.
Bevel angle 15°-40°, counter chamfer 10°-20°.
- Max. blade width 38 mm
- Max. blade thickness 12 mm
- Tool type Chisels, mortise chisels, plane blades
| Article no. | 703844 |
| Brand | Veritas |
Accessories
Veritas Adapter for Sharpening System II, Mortise Chisel
This adapter extends the clamping height of the Veritas Sharpening System II for clamping mortise chisels with up to 18 mm blade thickness. By opening the brass screw on the top of the sharpening aid, you can insert the adapter and...
€13.90
incl. VAT plus shipping costs
Article No. 703904
Veritas Sharpening System II Adapter for Sharpening Skew-Edged...
With laser-etched degree scale for setting the correct angle of inclination on the blade.
€41.90
incl. VAT plus shipping costs
Article No. 702434
Camber Roller Assembly for Veritas Sharpening System II
This accessory guide with barrel-shaped roller allows for honing slight curves into plane blade edges whilst still maintaining an accurate and consistent bevel angle. Simply replace the standard roller assembly of the Veritas sharpening...
€39.90
incl. VAT plus shipping costs
Article No. 703839
Veritas Sharpening Device, for Small Plane Blades
This mount enables easier sharpening of short blades such as spokeshaves, reversing blades or small violin planes. Two magnets and a moveable fence hold the blades securely, the die-cast aluminium handle extends the blade and enables...
€26.50
incl. VAT plus shipping costs
Article No. 702110
Replacement parts
Veritas Narrow Blade Clamp for Veritas Sharpening System II
Convert your standard Veritas Sharpening System II (No. 703666 ) into a self-centring double jaw honing guide. Simply replace the standard clamping unit by the double jaw clamp and you're done! The double jaw honing device allows for...
€60.90
incl. VAT plus shipping costs
Article No. 703843
Suitable for
Veritas Adapter for Sharpening System II, Mortise Chisel
This adapter extends the clamping height of the Veritas Sharpening System II for clamping mortise chisels with up to 18 mm blade thickness. By opening the brass screw on the top of the sharpening aid, you can insert the adapter and...
€13.90
incl. VAT plus shipping costs
Article No. 703904
»Scary Sharpening« Set
The Scary Sharp Technique is a cost-effective and simple alternative to all other sharpening methods. This method gets its name Scary Sharp from the fact that it can create an incredibly (scary) sharp cutting edge. The main benefits of...
€79.90
incl. VAT plus shipping costs
Article No. 715596