M. Power Tools DC Fasttrack Sharpening System

1 - Like new

This sharpening system allows 25° and 30° bevels on plane blades and chisels to be sharpened...
This sharpening system allows 25° and 30° bevels on plane blades and chisels to be sharpened without requiring time-consuming adjustments. The dry grinding system allows it to be used independent of environmental conditions. Hence, it is excellently suited for use on construction sites and anywhere where quick results are needed without requiring maximum sharpness.
  • Insertion of the magnetically attached diamond stone with corresponding grit
  • Insertion of slide with alignment for 25° or 30° bevel
  • Insertion of plane blade/chisel and fixing in place at stop against counter-pressure
  • Grinding of bevel angle by moving the slide
  • Where necessary, removal of the burr on the back of the blade

Tool support and slide are made of solid milled and anodised aluminium with dovetail guide and wear-resistant nylon slide rail.
M. Power Tools DC Diamond Stones
Diamond Cross (DC) sharpening stones offer an excellent price/performance ratio with a high manufacturing quality. The lapping of the supporting plates and the stringent quality controls are performed at the company's headquarters in England.
  • Monocrystalline* diamond particles guarantee a long service life and excellent material removal
  • Uniform grit sizes and a dense diamond distribution for even grinding patterns
  • Cross-shaped recesses prevent clogging due to grinding debris
  • Permanently flat and warp-free thanks to specially lapped supporting plates made of steel with a stainless steel matrix
  • 3 year warranty for material and manufacturing defects! (damage from improper use is not covered by this warranty)
Monocrystalline* diamond-coated sharpening devices:
Diamond-coated sharpening devices remain permanently flat, and are especially suitable for tools with straight blades, as well as for producing flat surfaces (e.g. backs of plane and chisel blades, plane soles, scrapers). Also suitable for carbide coated cutters, tool steels, HSS and non-metal materials (glass, ceramic, etc.). We recommend moistening diamond-coated sharpening devices with water and grinding with little pressure.
* Monocrystalline diamonds are significantly more wear resistant than the polycrystalline diamonds used to make lower quality diamond sharpening tools.

    Scope of delivery

    Fasttrack sharpening system, 1 x diamond stone medium-coarse, 1 x diamond stone medium-fine, cleaning block.
     
    more
    less
    Further details on the manufacturer

    M. Power Tools

    Article no. 740830
    €79.90 €64.90 per set

    Prices incl. VAT

    i

    plus shipping costs

    Remember
    Many other models
    Type Price Quantity
    M. Power Tools DC Fasttrack Sharpening System
      €79.90
    €64.90
     
    Plenty of accessories and spare parts

    Accessories

    €11.30 €9.40

    incl. VAT plus shipping costs

    Article No. 740831

    M. Power Tools DC Fasttrack De-Burring Plate, Extra-Fine

    M. Power Tools DC Fasttrack De-Burring Plate, Extra-Fine

    For de-burring the mirror side of chisels after sharpening. Self-adhesive. Fits No. 740851 , 740852 .
    €15.50

    incl. VAT plus shipping costs

    Article No. 740832

    M. Power Tools DC Fasttrack Diamond Stone, Extra-Fine

    M. Power Tools DC Fasttrack Diamond Stone, Extra-Fine

    With magnetic insert. Fits No. 740830 . Dimensions abrasive: 77 x 26 x 4.2 mm.
    variants
    €15.50

    incl. VAT plus shipping costs

    Article No. 740837

     

    Replacement parts

    M. Power Tools DC Fasttrack Diamond Stone, Medium-Fine

    M. Power Tools DC Fasttrack Diamond Stone, Medium-Fine

    With magnetic insert. Fits No. 740830 . Dimensions abrasive: 77 x 26 x 4.2 mm.
    variants
    €15.50

    incl. VAT plus shipping costs

    Article No. 740835

     
    Suitable for

    Suitable for

    M. Power Tools DC Fasttrack MK2 Sharpening System, Set

    M. Power Tools DC Fasttrack MK2 Sharpening System, Set

    This sharpening system allows the sharpening of bevels of 25° and 30° on one side and 27° and 32° on the opposite side, thus allowing the grinding of a micro bevel. Suitable for plane blades and chisels, without requiring time-consuming...
    €125.90

    incl. VAT plus shipping costs

    Article No. 740852