Lie-Nielsen Honing Guide
Solid side clamping honing guide, made of stainless steel, with a bronze bearing. The different removable jaws allow for the clamping of chisels with a blade width of under 5 mm, of mortise chisels, short plane blades and skew blades. The honing guide comes with the standard pair of jaws that fit most chisel and blade types. This honing guide has been designed specifically for Lie-Nielsen blades and chisels but is also suited for tools from other manufacturers. The 12 mm wide roller in combination with the use of different pressure points on the blade during sharpening allow for slightly cambered blades. Standard jaws included.
- Max. blade width 70 mm
- Max. blade thickness 7 mm
| Article no. | 701211 |
| Brand | Lie-Nielsen |
Accessories
Long Jaws for Lie-Nielsen Honing Guide
The long jaws fit all spokeshave blades and match the following Lie-Nielsen planes: Low-angle jack rabbet plane, bench rabbet plane, cabinet maker's scraper No. 85, shoulder plane. These jaws are reversible. The short end hones a bevel...
€55.80
Article No. 701213
Chisel Jaws for Lie-Nielsen Honing Guide
The chisel jaws fit 3 mm (1/8 inch) and 4.5 mm (3/16 inch) Lie-Nielsen bevel edge chisels as well as 6-19 mm (1/4 to ¾ inch) standard bevel edge chisels.
€55.80
Article No. 701214
Mortise Chisel Jaws for Lie-Nielsen Honing Guide
The mortise chisel jaws fit all Lie-Nielsen mortise chisels, as well as the 25 mm (1 inch) bevel edge chisel.
€55.80
Article No. 701215
18° Skewed Jaws for Lie-Nielsen Honing Guide, Right
The 18° skewed jaws fit Lie-Nielsen skew block plane.
€55.80
Article No. 701217
30° Skewed Jaws for Lie-Nielsen Honing Guide, Right
The 30° skewed jaws fit Lie-Nielsen side rabbet planes.
€55.80
incl. VAT plus shipping costs
Article No. 701219
Passend dazu
King Combination Stone, Large, Grit 1000/6000, 207 x 66 x 36 mm
€56.80
incl. VAT plus shipping costs
Article No. 711006
