HNT Gordon
Products from HNT Gordon
HNT Gordon Spokeshave, Straight Sole, HSS Blade
This perfectly crafted spokeshave with a fine plane mouth and straight sole is used for the finest chip removal when machining all flat and elongated curved shapes such as on bows, in furniture making, rungs and edges. Blade tilt of 55°,...
€298.00
incl. VAT plus shipping costs
Article No. 715700
HNT Gordon Spokeshave, Curved Sole, HSS Blade
This perfectly crafted spokeshave with a fine plane mouth and curved sole is used for the finest chip removal when machining all curved shapes such as on bows, in furniture making, rungs and edges. The radius of the plane sole is 75 mm....
€298.00
incl. VAT plus shipping costs
Article No. 715701
HNT Gordon Spokeshave, Curved Sole with 10 mm Radius, HSS Blade
This perfectly crafted spokeshave with a fine plane mouth and curved sole is used for the finest chip removal when machining very tight inside curves, such as those found in furniture making. The radius of the plane sole is 10 mm. Blade...
€189.00
incl. VAT plus shipping costs
Article No. 715703
HNT Gordon Multi-function Vice
Conceived, designed and manufactured by Terry Gordon in Australia, the innovative and unique design of this multi-function vice is based on the exceptional ability of swivelling any object into the correct working position for safe...
€1,998.00
incl. VAT plus shipping costs
Article No. 715705
HNT Gordon Front Vice
Conceived, designed and manufactured by Terry Gordon in Australia, the innovative design of this front vice is based on the elegant and simple principle that two well-fitting concentric cylinders cannot tilt. Since the jaw surface...
€639.00
incl. VAT plus shipping costs
Article No. 715614
HNT Gordon Brass Bench Dogs, Ø 19 mm
Brass bench dogs with square head and cylindrical shaft. One of the head edges is slightly concave and angled at 2 degrees to better grip the clamped wood. Pin length 34 mm.
€18.50
incl. VAT plus shipping costs
Article No. 715616
HNT Gordon Tail Vice
The tail vice can be fully integrated into the workbench. Only the knurled knob protrudes from the side and the removable brass bench dog can be inserted into a slot from above. This unobtrusive design allows each piece of wood to be...
€298.00
incl. VAT plus shipping costs
Article No. 715612
HNT Gordon Tail Vice Dogs, Ø 13 mm
Brass bench dogs with square head and cylindrical shaft. One of the head edges is slightly concave and angled at 2 degrees to better grip the clamped wood. Pin length 34 mm.
€13.70
incl. VAT plus shipping costs
Article No. 715615
€142.00
incl. VAT plus shipping costs
Article No. 715706
€48.00
incl. VAT plus shipping costs
Article No. 715702
€36.90
incl. VAT plus shipping costs
Article No. 715704
HNT Gordon Handles for Accu-Burr Burnisher, AB¹
This pair of handles, developed by HNT Gordon, is a high-quality addition to the Accu-Burr burnisher, providing a secure hold and enabling even guidance. The raised profile of the handles, fitting precisely between the index finger and...
€49.80
incl. VAT plus shipping costs
Article No. 715707
HNT Gordon Tail Vice
The tail vice can be fully integrated into the workbench. Only the knurled knob protrudes from the side and the removable brass bench dog can be inserted into a slot from above. This unobtrusive design allows each piece of wood to be...
€329.00
incl. VAT plus shipping costs
Article No. 715613
HNT Gordon Tail Vice Dogs, Ø 13 mm
Brass bench dogs with square head and cylindrical shaft. One of the head edges is slightly concave and angled at 2 degrees to better grip the clamped wood. Pin length 34 mm.
€13.70
incl. VAT plus shipping costs
Article No. 715631
HNT Gordon Brass Bench Dogs, Ø 19 mm
Brass bench dogs with square head and cylindrical shaft. One of the head edges is slightly concave and angled at 2 degrees to better grip the clamped wood. Pin length 34 mm.
€18.50
incl. VAT plus shipping costs
Article No. 715632
HNT Gordon Tail Vice Dogs, Ø 13 mm
Brass bench dogs with square head and cylindrical shaft. One of the head edges is slightly concave and angled at 2 degrees to better grip the clamped wood. Pin length 34 mm.
€13.70
incl. VAT plus shipping costs
Article No. 715633
HNT Gordon Brass Bench Dogs, Ø 19 mm
Brass bench dogs with square head and cylindrical shaft. One of the head edges is slightly concave and angled at 2 degrees to better grip the clamped wood. Pin length 34 mm.
€18.50
incl. VAT plus shipping costs
Article No. 715634
HNT Gordon Tail Vice Dogs, Ø 13 mm
Brass bench dogs with square head and cylindrical shaft. One of the head edges is slightly concave and angled at 2 degrees to better grip the clamped wood. Pin length 34 mm.
€13.70
incl. VAT plus shipping costs
Article No. 715635
HNT Gordon Brass Bench Dogs, Ø 19 mm
Brass bench dogs with square head and cylindrical shaft. One of the head edges is slightly concave and angled at 2 degrees to better grip the clamped wood. Pin length 34 mm.
€18.50
incl. VAT plus shipping costs
Article No. 715636
HNT Gordon Tail Vice Dogs, Ø 13 mm
Brass bench dogs with square head and cylindrical shaft. One of the head edges is slightly concave and angled at 2 degrees to better grip the clamped wood. Pin length 34 mm.
€13.70
incl. VAT plus shipping costs
Article No. 715637
HNT Gordon Brass Bench Dogs, Ø 19 mm
Brass bench dogs with square head and cylindrical shaft. One of the head edges is slightly concave and angled at 2 degrees to better grip the clamped wood. Pin length 34 mm.
€18.50
incl. VAT plus shipping costs
Article No. 715638