27 of 27
 
€37.50

incl. VAT plus shipping costs

Article No. 703637

Replacement Blade for DICTUM Rabbet Block Plane, SK4 Steel

Replacement Blade for DICTUM Rabbet Block Plane

Fits No. 703335 , No. 703345 , No. 703408 and No. 703350 DICTUM Rabbet Block Plane.
variants
   
€12.80

incl. VAT plus shipping costs

Article No. 703415

DICTUM Hot Dog for Left-handers

DICTUM Hot Dog

Fits No. 703419 .
variants
€20.90

incl. VAT plus shipping costs

Article No. 703423

Replacement Blade for Veritas Block Plane, PM-V11

Replacement Blade for Veritas Block Plane

Fits No. 703692 , 703889 , 703890 and 703693 .
variants
 
€52.90

incl. VAT plus shipping costs

Article No. 702195

Replacement Blade for Veritas Low-Angle Bench Planes, PM-V11

Replacement Blade for Veritas Low-Angle Bench Planes

Fits No. 703629 , 703872 , 703866 , 703896 , 703831 and 703832 .
variants
 
€69.90

incl. VAT plus shipping costs

Article No. 702199

variants
 
€62.90

incl. VAT plus shipping costs

Article No. 702198

Repl. Blade for Veritas Bench Plane No. 4½  and Fore Plane No. 6, PM-V11

Replacement Blade for Veritas Bench Plane No. 4½ and Fore...

Fits No. 703678 , 703882 , 703868 and 703611 .
variants
 
€76.90

incl. VAT plus shipping costs

Article No. 702196

variants
 
€62.50

incl. VAT plus shipping costs

Article No. 702200

Veritas Sharpening Device, for Small Plane Blades

Veritas Sharpening Device, for Small Plane Blades

This mount enables easier sharpening of short blades such as spokeshaves, reversing blades or small violin planes. Two magnets and a moveable fence hold the blades securely, the die-cast aluminium handle extends the blade and enables...
€26.50

incl. VAT plus shipping costs

Article No. 702110

Veritas Tapered Drill Bit

Veritas Tapered Drill Bit

When clamped in a brace with four-jaw chuck, this drill bit conically enlarges cylindrical holes. For boreholes with a diameter of 11-30 mm. Wedge angle 12.8°, fits Veritas cone cutters (No. 701880 - 701882 ). Fitting brace braces No....
€59.90

incl. VAT plus shipping costs

Article No. 701867

Veritas Cone Cutter ⅝"

Veritas Cone Cutter

For cutting conical ends on cylindrical rods, e.g. Windsor chair legs, rungs, etc. Wedge angle 12.8°, adjustable blade with straight cutting edge 63 mm long, carbon steel (60 HRC), aluminium body. Fits tapered drill bit No. 701867 .
variants
€55.90

incl. VAT plus shipping costs

Article No. 701882

Veritas Cone Cutter ⅜"

Veritas Cone Cutter

For cutting conical ends on cylindrical rods, e.g. Windsor chair legs, rungs, etc. Wedge angle 12.8°, adjustable blade with straight cutting edge 63 mm long, carbon steel (60 HRC), aluminium body. Fits tapered drill bit No. 701867 .
variants
€52.30

incl. VAT plus shipping costs

Article No. 701880

DICTUM Woodturner's Jacket, Size XL

DICTUM Woodturner's Jacket

Lightweight turner's jacket made of cotton blended fabric. Velcro fasteners on sleeves and collar, collar can be secured when not in use, two back pockets, zip. Made in Germany.
variants
€62.90

incl. VAT plus shipping costs

Article No. 701889

DICTUM Woodturner's Jacket, Size M

DICTUM Woodturner's Jacket

Lightweight turner's jacket made of cotton blended fabric. Velcro fasteners on sleeves and collar, collar can be secured when not in use, two back pockets, zip. Made in Germany.
variants
€62.90

incl. VAT plus shipping costs

Article No. 701887

DICTUM Woodturner's Jacket, Size L

DICTUM Woodturner's Jacket

Lightweight turner's jacket made of cotton blended fabric. Velcro fasteners on sleeves and collar, collar can be secured when not in use, two back pockets, zip. Made in Germany.
variants
€62.90

incl. VAT plus shipping costs

Article No. 701888

Veritas Cone Cutter ½"

Veritas Cone Cutter

For cutting conical ends on cylindrical rods, e.g. Windsor chair legs, rungs, etc. Wedge angle 12.8°, adjustable blade with straight cutting edge 63 mm long, carbon steel (60 HRC), aluminium body. Fits tapered drill bit No. 701867 .
variants
€54.50

incl. VAT plus shipping costs

Article No. 701881

DICTUM Woodturner's Jacket, Size S

DICTUM Woodturner's Jacket

Lightweight turner's jacket made of cotton blended fabric. Velcro fasteners on sleeves and collar, collar can be secured when not in use, two back pockets, zip. Made in Germany.
variants
€62.90

incl. VAT plus shipping costs

Article No. 701886

DICTUM Carving Tool, Flat/Skew, Double Bevel 2/20 mm

DICTUM Carving Tool, Flat/Skew, Double Bevel

Straight chisels are preferred for lettering, but are also suitable for chip carving and for smoothing straight or slightly convex surfaces in figure sculpting. The skewed variant can be drawn across the surface and cuts into corners...
variants
   
€35.60

incl. VAT plus shipping costs

Article No. 701419

DICTUM Carving Tool, Flat/Skew, Double Bevel 2/13 mm

DICTUM Carving Tool, Flat/Skew, Double Bevel

Straight chisels are preferred for lettering, but are also suitable for chip carving and for smoothing straight or slightly convex surfaces in figure sculpting. The skewed variant can be drawn across the surface and cuts into corners...
variants
   
€32.10

incl. VAT plus shipping costs

Article No. 701418

DICTUM Carving Tool, Flat/Skew, Double Bevel 2/10 mm

DICTUM Carving Tool, Flat/Skew, Double Bevel

Straight chisels are preferred for lettering, but are also suitable for chip carving and for smoothing straight or slightly convex surfaces in figure sculpting. The skewed variant can be drawn across the surface and cuts into corners...
variants
   
€31.50

incl. VAT plus shipping costs

Article No. 701417

DICTUM Carving Tools, 12-Piece Set

DICTUM Carving Tools, 12-Piece Set

With these twelve sculptor's tools you are perfectly equipped for sculpting figures and ornaments. Flat 10 mm; flat/skew 10 mm; V-parting tool 41 V 65° / 6 mm; gouges, straight sweep 6 / 10 and 20 mm; sweep 8 / 6 and 13 mm; sweep 9 / 6...
   
€424.00

incl. VAT plus shipping costs

Article No. 701481

DICTUM Chisel, Short Pattern, Blade Width12 mm

DICTUM Chisels, Short Pattern

The short chisels are perfect for close, accurate work. They are particularly popular in the UK and USA. The large, impact-resistant handles are designed for use with a mallet. Ready-to-use, machine-ground bevel
variants
   
€17.20

incl. VAT plus shipping costs

Article No. 701392

DICTUM Chisel, Short Pattern, Blade Width 20 mm

DICTUM Chisels, Short Pattern

The short chisels are perfect for close, accurate work. They are particularly popular in the UK and USA. The large, impact-resistant handles are designed for use with a mallet. Ready-to-use, machine-ground bevel
variants
   
€19.20

incl. VAT plus shipping costs

Article No. 701394

DICTUM Chisel, Short Pattern, Blade Width 10 mm

DICTUM Chisels, Short Pattern

The short chisels are perfect for close, accurate work. They are particularly popular in the UK and USA. The large, impact-resistant handles are designed for use with a mallet. Ready-to-use, machine-ground bevel
variants
   
€17.20

incl. VAT plus shipping costs

Article No. 701391

DICTUM Chisel, Short Pattern, Blade Width 26 mm

DICTUM Chisels, Short Pattern

The short chisels are perfect for close, accurate work. They are particularly popular in the UK and USA. The large, impact-resistant handles are designed for use with a mallet. Ready-to-use, machine-ground bevel
variants
   
€20.20

incl. VAT plus shipping costs

Article No. 701395

Veritas Dovetail Saw Guide System, 1:4

Veritas Dovetail Saw Guide Systems

Easy-to-use saw guide that allows precise dovetail joints. Convertible groove-guided workpiece clamp - stop can be fitted in two positions for dovetails and tenons Magnet on the inside of the aluminium guide holds the saw (Kataba saw,...
variants
€56.60

incl. VAT plus shipping costs

Article No. 701057

DICTUM Chisel, Short Pattern, Blade Width 16 mm

DICTUM Chisels, Short Pattern

The short chisels are perfect for close, accurate work. They are particularly popular in the UK and USA. The large, impact-resistant handles are designed for use with a mallet. Ready-to-use, machine-ground bevel
variants
   
€18.20

incl. VAT plus shipping costs

Article No. 701393

Veritas Right-Angle Saw Guide

Veritas Right-Angle Saw Guide

This right-angle saw guide is ideal for making finger joints, cutting tenons or perfectly square perpendicular cuts on squared timber and battens. An ideal tool for less-experienced users and beginners allowing them to make precisely...
€50.50

incl. VAT plus shipping costs

Article No. 701056

DICTUM Chisel, Short Pattern, Blade Width 6 mm

DICTUM Chisels, Short Pattern

The short chisels are perfect for close, accurate work. They are particularly popular in the UK and USA. The large, impact-resistant handles are designed for use with a mallet. Ready-to-use, machine-ground bevel
variants
   
€16.40

incl. VAT plus shipping costs

Article No. 701390

DICTUM Entry-level Plane Set, Right-handed Use, SK4 Blade

DICTUM Entry-level Plane Set

With these three types of planes you are well prepared for most planing tasks. Long low-angle jack plane for right-handed use (No. 703420 , 703351 and 703369 ) or for left-handed use (No. 703419 , 703352 and 703368 ) Finishing Joining...
variants
   
€359.00

incl. VAT plus shipping costs

Article No. 703427

DICTUM Entry-level Plane Set, Left-handed Use, SK4 Blade

DICTUM Entry-level Plane Set

With these three types of planes you are well prepared for most planing tasks. Long low-angle jack plane for right-handed use (No. 703420 , 703351 and 703369 ) or for left-handed use (No. 703419 , 703352 and 703368 ) Finishing Joining...
variants
   
€359.00

incl. VAT plus shipping costs

Article No. 703428

27 of 27