Clamping Sleeve for Adaptor Flange
For mounting CBN grinding wheels Ø 150 mm e.g. on Low-speed Grinder DS 150 L (No. 720782 ). By means of this sleeve, the adaptor flange for CBN grinding wheels can be conveniently clamped to the machine shaft. The clamping sleeve bridges...
€5.10
incl. VAT plus shipping costs
Article No. 707837
Base Plate for DICTUM Double-wheeled Grinder
Matching base plate to connect the Wolverine sharpening system to the DICTUM Low-speed Grinder DS 150 L. The Oneway Wolverine sharpening system (No. 702170 ) was specially developed for sharpening woodturning tools. On double-wheeled...
€39.90
incl. VAT plus shipping costs
Article No. 731699
Adaptor Flange with Precision Disc, Bore 12.7 mm
The flange reduces the 32 mm standard bore of the grinding wheels to the 12.7 shaft diameter. It ensures an extremely smooth-running wheel in both axial and radial directions, and even better grinding results. Made in steel.
€12.90
incl. VAT plus shipping costs
Article No. 820908
Cleaning Block for Abrasives
Prevents the build-up of sanding dust and resin on abrasives. This increases the abrasive quality and increases the service life of the abrasive by two to four times. For sanding belts, discs, drums, etc. 200 x 38 x 38 mm.
€10.60
incl. VAT plus shipping costs
Article No. 707763
DICTUM Sharpening Device for BS 50-55
The precisely milled cross slide allows the arm to be moved in two directions at the same time in one operation. Almost all common jigs, e.g. for straight cutting edges, gouges, grinding tables, etc., can be attached and quickly...
€129.00
incl. VAT plus shipping costs
Article No. 729398
DICTUM Sharpening Device for Convex Bevels
Sharpening knives with convex bevels, as is often the case with outdoor or bushcraft knives, is usually only possible by hand. The additional belt guide roller of the BS 50/55 Belt Grinding Device (No. 711284 ) guides the belt in a...
€69.00
incl. VAT plus shipping costs
Article No. 729794
DICTUM Mounting Base for Sharpening Device for Convex Bevels
Used as a connecting link between the Sharpening Device for Convex Bevels (No. 729794 ) and the Belt Grinding Device BS 50/55 (No. 711284 ).
€13.90
incl. VAT plus shipping costs
Article No. 729795
Polishing Disc Mount, Tapered, Pair
The tapered thread makes it possible to clamp polishing discs with bore diameter 3-13 mm. For machine shafts with diameter 10 mm. Overall length 92 mm.
€10.60
incl. VAT plus shipping costs
Article No. 728798
Holding Arbors with Clamping Flanges, Pair
One left-hand and one "right-hand holding arbor with two flange discs each. For clamping polishing and grinding discs. Arbor diameter 10 mm x 35 mm. For machine shafts with diameter 10 mm.
€9.90
incl. VAT plus shipping costs
Article No. 728800
Holding Arbors, Pair
One left-hand and one right-hand holding arbor each, incl. clamping nut. For clamping polishing and grinding discs, grinding rollers, etc. Arbor diameter 10 mm x 63 mm. For machine shafts with diameter 10 mm.
€13.40
incl. VAT plus shipping costs
Article No. 728801
Grinding Roller
For mounting on the right-hand shaft of the polishing motor. Laminated rubber roller with holding arbor. Incl. sanding sleeves. For machine shafts with diameter 10 mm.
€14.90
incl. VAT plus shipping costs
Article No. 728802
Sanding Sleeve, Ø 50 mm
Fits grinding roller for DICTUM Mini Polishing Motor (No. 728802 ). Sleeve length 50 mm.
€0.90
incl. VAT plus shipping costs
Article No. 728803
Grinding Disc
For mounting on the right-hand shaft of the polishing motor. Velcro disc with mandrel. For machine shafts with diameter 10 mm.
€7.90
incl. VAT plus shipping costs
Article No. 728804
DICTUM Universal Handpiece HD-6.5
Handpiece with three-jaw chuck in particularly resilient design for rough work with the bending shaft, large milling, drilling or grinding tools. Max. speed 8500 rpm. Clamping range 1-6.5 mm. Comes with chuck key.
€25.90
incl. VAT plus shipping costs
Article No. 728809
DICTUM Universal Handpiece UH-6
Three-jaw chuck for milling, drilling or grinding work with the bending shaft. Max. speed 20 000 rpm. Clamping range 1-6 mm. Comes with chuck key.
€24.90
incl. VAT plus shipping costs
Article No. 728810
DICTUM Universal Handpiece UH-4
Three-jaw chuck for milling, drilling or grinding work with the bending shaft. Max. speed 20 000 rpm. Clamping range 1-4 mm. Comes with chuck key.
€19.90
incl. VAT plus shipping costs
Article No. 728811
Splash Guard for DICTUM Mini Polishing Motor PM 75
Thanks to the high speeds of polishing motors, fibres of the polishing discs and polishing paste are spun away. The sheet steel housing with folding splash guard prevents contamination on workbenches or walls. A must for work outside...
€42.60
incl. VAT plus shipping costs
Article No. 728822
Scroll Chuck 6.5 mm
For mounting on the right-hand shaft. Comes with chuck key. For machine shafts with diameter 10 mm. Clamping range 1-6.5 mm.
€12.90
incl. VAT plus shipping costs
Article No. 728799
Nylon Brush, Ø 75 x 8 x 3 mm
Coarse nylon bristles with aggressive removal properties. For removing surface dirt, derusting, or brushing softwood.
€6.90
incl. VAT plus shipping costs
Article No. 729664
Flexible Shaft for DICTUM Mini Double-wheeled Grinder DS 75
Retrofit kit for DICTUM Mini Double-wheeled Grinder DS 75 (No. 728793 ). Shaft length 92 cm.
€9.90
incl. VAT plus shipping costs
Article No. 728796
Circular Brush
Pointed 3-row circular brush with plastic core. For pre- and post-polishing. For tapered polishing disc mounts.
€3.90
incl. VAT plus shipping costs
Article No. 728808
DICTUM Flexible Shaft with Gear Rim Drill Chuck
Work flexibly and effectively in hard-to-reach places - no problem with the flexible shaft with a total length of 130 cm. A large handle with hand guard safely covers the rotating drill chuck and provides a good grip. Shaft tools such as...
€32.10
incl. VAT plus shipping costs
Article No. 728820
Reducer Rings, Pair
For reducing the bore diameter of grinding and polishing wheels. Made of plastic.
€2.00
incl. VAT plus shipping costs
Article No. 729027
CBN Grinding Pin Ø 15 mm, B126
The cylindrical shape of this CBN grinding pin is ideal for grinding bore holes, radii and contours, and for resharpening carving and hook knives by hand with a flexible shaft or drill. CBN coating around the circumference and on the...
€12.90
incl. VAT plus shipping costs
Article No. 704942
€2.30
incl. VAT plus shipping costs
Article No. 729775
€6.90
incl. VAT plus shipping costs
Article No. 729454
Hattori Angle Jig for Chisels and Plane Blades
Gauge with 14 angles for checking tool cutting edges. The sizes of the angle notches are particularly suitable for chisels and plane blades. An engineer's corner at the base of each slot ensures full contact when checking a bevel and...
€28.90
incl. VAT plus shipping costs
Article No. 714676
DICTUM Belt Grinding Device BS 50/55, fits Low-speed Grinder...
With the belt grinding attachment, the DICTUM Low-speed Grinder DS 150 L transforms into a bench belt grinder, making it even more versatile. By using abrasive belts of 50 mm or 55 mm width on the right side of the machine and the...
€119.00
incl. VAT plus shipping costs
Article No. 711284
DICTUM Superflange with Precision Disc
The flange allows to adjust the 32 mm standard bore of the CBN grinding wheels to the shaft diameter of the different sharpening machines. Made of aluminium.
€14.90
incl. VAT plus shipping costs
Article No. 704848