HNT Gordon Front Vice
Precise, innovative and easy to assemble
Conceived, designed and manufactured by Terry Gordon in Australia, the innovative design of this front vice is based on the elegant and simple principle that two well-fitting concentric cylinders cannot tilt. Since the jaw surface presses evenly on the workpiece without one side being clamped more than the other, work can be done here with little pressure.
The durability and reliability of the HNT Gordon front vice has been extensively proven over five years of daily use in Terry's own workshop in the manufacture of his extensive range of first class hand planes and other tools.
Assembly:
The vice is attached to the workbench from below with at least four screws (not included) and sits parallel to the front edge. To ensure that the front vice is flush with the workbench, the worktop thickness must be 75 mm. If required, the workbench can be milled out or doubled up from below. For rough or slightly slanted workpieces, we recommend using a piece of leather or lining one of the jaw surfaces with cork, for example.
HNT Gordon & Co.
HNT Gordon and Co. Classic Plane Makers Australia was founded in 1995 by Terry Gordon after several years of development work. Terry was an avid woodworker and navigator in the Air Force when he decided to follow his passion for woodworking. Only the best materials are used for the high-quality products, and all development and production processes aim to create a simple and functional design that will last for generations.
- Jaw opening 150 mm
- Length 450 mm
- Weight 6.78 kg
- Jaw width 230 mm
- Throat depth 95 mm
| Article no. | 715614 |
| Brand | HNT Gordon |
