DICTUM Lathe S 175, Exhibition Machine

This table lathe impresses with its robust cast iron construction and interesting additional functions. The frequency converter for the electronic speed regulation is optimally protected against damage by a sheet steel housing. A triple pulley provides maximum torque at any speed. LED speed display in rpm. The highlight: the tailstock quill is equipped with a thread and a clamping nut to clamp drills without additional drill chucks with a #2 MT direct collet chuck (No. 727653-59 /727696). This does not unnecessarily reduce the centre distance. Optionally, a depth setting gauge (No. 707789) with mm scale and depth limiter can be mounted. The control box with on/off switch, speed controller and reversing switch (left/right rotation) can be attached anywhere on the machine by its magnetic base. Two openings on the cast bed allow the installation of an optional, height-adjustable shelf (No. 707788) in which the control box can be quickly, easily and accessibly placed.Specifications:

• Spindle indexing 24 x 15°
• Height of centre over bed 175 mm
• Distance between centres 350-400 mm
• Speed ranges 80-800, 170-1700, 350-3700 rpm
• Hollow spindle Ø 20 mm (#2 MT inner cone) with M33 x 3.5 DIN 800 thread and two bearings
• Hollow tailstock (10 mm bore) with #2 MT quill (95 mm travel)
• Motor 0.75 kW (1 hp)
• Motor rating 230 V
• Length 895 mm
• Width 365 mm
• Height 415 mm
• Weight 47 kg

Basic configuration:

• Tool rest 150 mm
• Tailstock quill with thread and clamping nut
• Tailstock with mounting base for depth setting gauge (No. 707789)
• 80 mm face plate
• Knockout rod
• Screw holes on the cast iron feet for mounting on bench plates or underframe
• Assembly openings for height-adjustable shelf (No. 707788)
• Comes with German and English instructions